Dr. Kang Min
My Social Links

Dr. Kang Min

Professor
Nanjing Agricultural University, China

Highest Degree
Ph.D. in Electrical and Mechanical Engineering from Nanjing University of Aeronautics and Astronautics, China

Share this Profile

Area of Interest:

Engineering
100%
Mechanical Engineering
62%
Simulation
90%
Electrical Engineering
75%
Thermal Engineering
55%

Research Publications in Numbers

Books
0
Chapters
0
Articles
0
Abstracts
0

Selected Publications

  1. Wang, X., J. Xian, Y. Yang, Y. Zhang, X. Fu and M. Kang, 2017. Use of coordinate measuring machine to measure circular aperture complex optical surface. Measurement, 100: 1-6.
    CrossRef  |  Direct Link  |  
  2. Ullah, F. and M. Kang, 2017. Impact of air flow rate on drying of apples and performance assessment of parabolic trough solar collector. Applied Thermal Eng., 127: 275-280.
    CrossRef  |  Direct Link  |  
  3. Chen, X., M. Kang, X.S. Wang, M. Hassan and J. Yang, 2017. Tool path optimal design for slow tool servo turning of complex optical surface. Proc. Inst. Mech. Eng. Part B-J. Eng. Manuf., 231: 825-837.
    CrossRef  |  Direct Link  |  
  4. Wang, X., P. Han, M. Kang and K. Ehmann, 2016. Surface-blended texturing of medical needles for friction reduction using a picosecond laser. Applied Phys. A, Vol. 122. 10.1007/s00339-016-9892-2.
    CrossRef  |  Direct Link  |  
  5. Wang, X., M. Kang, X. Fu and C. Li, 2016. Predictive modeling of surface roughness in lenses precision turning using regression and support vector machines. Int. J. Adv. Manuf. Technol., 87: 1273-1281.
    CrossRef  |  Direct Link  |  
  6. Ullah, F., M. Kang, L. Hassan, N. Li, J. Yang, X. Wang and M.K. Khattak, 2016. Impact of drying method of figs with small-scale flat-plate solar collector. World J. Eng., 13: 407-412.
    CrossRef  |  Direct Link  |  
  7. Ge, Y., J. Zhu, M. Kang, J. Xian, A. Qiu and G. Zhong, 2016. Ion current rectification in a confined conical nanopore with high solution concentrations. Mol. Simul., 42: 942-947.
    CrossRef  |  Direct Link  |  
  8. Ge, Y., J. Xian, M. Kang, X. Li and M. Jin, 2016. MD study of solution concentrations on ion distribution in a nanopore-based device inspired from red blood cells. Comput. Math. Methods Med., Vol. 2016. 10.1155/2016/2787382.
    CrossRef  |  Direct Link  |  
  9. Fahim Ullah, S. Ahmad, S. Wahab, A. Zeb, M.K. Khattak, S. Khan and M. Kang, 2016. Quality evaluation of biscuits supplemented with alfalfa seed flour. Foods, Vol. 5. 10.3390/foods5040068.
    CrossRef  |  Direct Link  |  
  10. Wang, X., X. Fu, C. Li and M. Kang, 2015. Tool path generation for slow tool servo turning of complex optical surfaces. Int. J. Adv. Manuf. Technol., 79: 437-448.
    Direct Link  |  
  11. Wang, X., M. Giovannini, Y. Xing, M. Kang and K. Ehmann, 2015. Fabrication and tribological behaviors of corner-cube-like dimple arrays produced by laser surface texturing on medical needles. Tribol. Int., 92: 553-558.
    CrossRef  |  Direct Link  |  
  12. Ge, Y., Q. An, Y. Huang, M. Kang and Y. Chen, 2015. Ion current rectification of glass conical nanopore. J. Comput. Theor. Nanosci., 12: 3994-3998.
    CrossRef  |  Direct Link  |  
  13. Wang, Y., M. Kang, S.W. Jin, X.Q. Fu and X.S. Wang, 2014. Electrochemical behaviour in process of electrodeposition Ni-P alloy coating. Surf. Eng., 30: 557-561.
    CrossRef  |  Direct Link  |  
  14. Wang, Y., M. Kang, S.W. Jin and X.Q. Fu, 2014. Dynamic parameters of jet electrodeposition for Ni-P alloy. Asian J. Chem., 26: 5415-5418.
  15. Liu, Z.X., M. Kang and X.Q. Fu, 2014. Simulation research of small holes by combined ultrasonic and electrochemical machining based on CFX. Key Eng. Mater., 584: 60-66.
    CrossRef  |  Direct Link  |  
  16. Liu, Z.X., M. Kang and X.Q. Fu, 2014. Rotary combined ultrasonic and electrochemical machining device of small holes and its test study. Key Eng. Mater., 584: 54-59.
    CrossRef  |  Direct Link  |  
  17. Liu, Z.X. and M. Kang, 2014. The analysis of small holes by RUECM. Chinese Mech. Eng., 35: 197-204.
    Direct Link  |  
  18. Yang, Y., M. Kang, X.Q. Fu and Y. Wang, 2013. The develop of automatic jet electroplating machining gear tool. Key Eng. Mater., 568: 151-156.
    CrossRef  |  Direct Link  |  
  19. Wang, Y., M. Kang, Y. Yang and X.Q. Fu, 2013. Study on the high speed jet-electrode position Ni-P alloy. Key Eng. Mater., 567: 39-44.
    CrossRef  |  Direct Link  |  
  20. Fu, X.Q., J.Y. Xian, M. Kang and M.H. Xiao, 2013. Research on the process of numerical control electrochemical turning based on finite element method. Adv. Mater. Res., 764: 95-101.
    CrossRef  |  Direct Link  |  
  21. Fu, X.Q., J.Y. Xian, M. Kang and M.H. Xiao, 2013. Research on flow field simulation and experiment of numerical control electrochemical turning. Key Eng. Mater., 568: 25-30.
    CrossRef  |  Direct Link  |  
  22. Zhang, H.W. and M. Kang, 2012. Effects of speed ratio K value of rubber-bar on cotton harvesting performance. Adv. Mater. Res., 383: 3005-3010.
    CrossRef  |  
  23. Zhang, H.W., M. Kang and J. Wu, 2011. Digital modeling and key parts simulation of rubber-bar roller cotton harvester. Applied Mech. Mater., 52-54: 1586-1591.
    CrossRef  |  Direct Link  |  
  24. Kang, M., X.S. Wang, Y. Yang and X. Zheng, 2011. Study on the turing of toric spectacle lens by use of slow tool servo method. Applied Mech. Mater., 52-54: 1526-1531.
    CrossRef  |  Direct Link  |  
  25. Kang, M., X.Q. Fu and Y. Yang, 2011. Research on the process simulation of NC-ECM with ball-end tool-electrode. Adv. Mater. Res., 154-155: 338-343.
    CrossRef  |  Direct Link  |  
  26. Kang, M., X. Fu and Y. Yang, 2011. Research on flow field characteristics and experiments of numerical control electrochemical machining. Adv. Sci. Lett., 4: 1933-1938.
    CrossRef  |  Direct Link  |  
  27. Kang, M., H.S. Li and X.Q. Fu, 2011. Measurement of electrochemical machining initial gap based on machine vision. Adv. Mater. Res., 230: 1190-1194.
    CrossRef  |  Direct Link  |  
  28. Fu, X.Q., M. Kang and Q.Y. Zheng, 2011. Research on flow field simulation and experiment of numerical control electrochemical machining. Key Eng. Mater., 458: 63-68.
    CrossRef  |  Direct Link  |  
  29. Kang, M., X.Q. Fu and Y. Yang, 2010. Experimental study on numerical controlled electrochemical turning. Key Eng. Mater., 426-427: 658-663.
    CrossRef  |  Direct Link  |