Hong  Hocheng
My Social Links

Hong Hocheng

Professor
National Tsing Hua University, Taiwan


Highest Degree
Ph.D. in Mechanical Enginnering from University of California, USA

Share this Profile

Area of Interest:

Engineering
100%
Innovative Technology
62%
Manufacturing
90%
Mechanical Characterization
75%
Machinery Design
55%

Research Publications in Numbers

Books
0
Chapters
0
Articles
0
Abstracts
0

Selected Publications

  1. Shih, A.J., B. Denkena, T. Grove, D. Curry and H. Hocheng et al., 2018. Fixed abrasive machining of non-metallic materials. CIRP Ann., 67: 767-790.
    CrossRef  |  Direct Link  |  
  2. Jadhav, U.U., B.K. Biswall, Z. Chen, E.H. Yang and H. Hocheng, 2018. Leaching of metals from incineration bottom ash using organic acid. J. Sustain. Metall., 4: 115-125.
    CrossRef  |  Direct Link  |  
  3. Hocheng, H., H.C. Tseng, M.L. Hsieh and Y.H. Lin, 2018. Tool wear monitoring in single-point diamond turning using laser scattering from machined workpiece. J. Manuf. Processes, 31: 405-415.
    CrossRef  |  Direct Link  |  
  4. Hocheng, H., C.C. Chen and C.C. Tsao, 2018. Prediction of critical thrust force for tubular composite in drilling-induced delamination by numerical and experimental analysis. Compos. Struct., 203: 566-573.
    CrossRef  |  Direct Link  |  
  5. Chakankar, M., U. Jadhav and H. Hocheng, 2018. Recovery of Silver from Industrial Wastes: Strategies and Technologies. In: Silver Recovery from Assorted Spent Sources: Toxicology of Silver Ions, Syed, S. (Ed.). World Scientific Publishing Company, Japan, ISBN: 9781786344595.
  6. Chakankar, M., C.H. Su and H. Hocheng, 2018. Leaching of metals from end-of-life solar cells. Environ. Sci. Pollut. Res. 10.1007/s11356-018-1918-1.
    CrossRef  |  Direct Link  |  
  7. Chakankar, M. and H. Hocheng, 2018. Hydrometallurgical recovery of metals from waste solders: A mini review. Int. J. Bioprocess Biotechnol. Adv., 3: 104-108.
    Direct Link  |  
  8. Jadhav, U., C. Su, M. Chakankar and H. Hocheng, 2017. Acetic acid mediated leaching of metals from lead-free solders. Bioresour. Bioprocess., Vol. 4. 10.1186/s40643-017-0173-5.
    CrossRef  |  Direct Link  |  
  9. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Recycling of Thermal Power Generation Wastes. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 8, CRC Press, USA., ISBN: 9781138712614.
  10. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Recycling of Solar Electricity Wastes. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 7, CRC Press, USA., ISBN: 9781138712614.
  11. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Recycling of Metal Production Wastes. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 6, CRC Press, USA., ISBN: 9781138712614.
  12. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Recycling of Energy Storage Wastes. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 5, CRC Press, USA., ISBN: 9781138712614.
  13. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Recycling of Electronic Wastes. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 4, CRC Press, USA., ISBN: 9781138712614.
  14. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Introduction. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 1, CRC Press, USA., ISBN: 9781138712614.
  15. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Generation and Composition of Various Metal-Containing Industrial Wastes. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 2, CRC Press, USA., ISBN: 9781138712614.
  16. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Conventional Metal Recycling Techniques. In: Biohydrometallurgical Recycling of Metals from Industrial Wastes, Hocheng, H., M. Chakankar and U. Jadhav (Eds.). Chapter 3, CRC Press, USA., ISBN: 9781138712614.
  17. Hocheng, H., M. Chakankar and U. Jadhav, 2017. Biohydrometallurgical Recycling of Metals from Industrial Wastes. 1st Edn., CRC Press, USA., ISBN: 9781138712614, Pages: 212.
  18. Tsao, C.C. and H. Hocheng, 2016. A review of backup mechanism for reducing delamination when drilling composite laminates. J Res. Updates Polym. Sci., 5: 97-107.
    Direct Link  |  
  19. Jadhav, U., C. Su and H. Hocheng, 2016. Leaching of metals from printed circuit board powder by an Aspergillus niger culture supernatant and hydrogen peroxide. RSC Adv., 6: 43442-43452.
    CrossRef  |  Direct Link  |  
  20. Jadhav, U., C. Su and H. Hocheng, 2016. Leaching of metals from large pieces of printed circuit boards using citric acid and hydrogen peroxide. Environ. Sci. Pollut. Res., 23: 24384-24392.
    CrossRef  |  Direct Link  |  
  21. Jadhav, U. and H. Hocheng, 2016. Study of Acidithiobacillus ferrooxidans and enzymatic bio-Fenton process-mediated corrosion of copper-nickel alloy. Environ. Technol., 37: 2669-2677.
    CrossRef  |  Direct Link  |  
  22. Jadhav, U. and H. Hocheng, 2016. Recovery of phosphorus from source separated urine by Acidithiobacillus ferrooxidans culture supernatant. Ecol. Eng., 92: 90-96.
    CrossRef  |  Direct Link  |  
  23. Hocheng, H., C.C. Tsao and H.T. Chen, 2016. Utilizing internal icing force to reduce delamination in drilling composite tubes. Compos. Struct., 139: 36-41.
    CrossRef  |  Direct Link  |  
  24. Jadhav, U.U. and H. Hocheng, 2015. Waste solder and printed circuit board: The emerging secondary sources for recovery of metals. Arch. Mater. Sci. Eng., 72: 5-15.
    Direct Link  |  
  25. Jadhav, U.U. and H. Hocheng, 2015. Analysis of metal bioleaching from thermal power plant fly ash by Aspergillus niger 34770 culture supernatant and reduction of phytotoxicity during the process. Applied Biochem. Biotechnol., 175: 870-881.
    CrossRef  |  Direct Link  |  
  26. Jadhav, U. and H. Hocheng, 2015. Hydrometallurgical recovery of metals from large printed circuit board pieces. Scient. Rep., Vol. 5. 10.1038/srep14574.
    CrossRef  |  Direct Link  |  
  27. Jadhav, U. and H. Hocheng, 2015. Enzymatic bioleaching of metals from printed circuit board. Clean Technol. Environ. Policy, 17: 947-956.
    CrossRef  |  Direct Link  |  
  28. Huang, T.Y., H. Hocheng, T.H. Chou, W.H. Yang, C.J. Ting, K.Y. Cheng and C.W. Hsieh, 2015. Design and fabrication of sunlight-redirecting and infrared-insulating microstructure. Energy Build., 90: 114-126.
    CrossRef  |  Direct Link  |  
  29. Chen, W., W. Lai, Y. Wang, K. Wang and S. Lin et al., 2015. Ultrafast laser engraving method to fabricate gravure plate for printed metal-mesh touch panel. Micromachines, 6: 1483-1489.
    CrossRef  |  Direct Link  |  
  30. Jadhav, U.U. and H. Hocheng, 2014. Use of Aspergillus niger 34770 culture supernatant for tin metal removal. Corrosion Sci., 82: 248-254.
    CrossRef  |  Direct Link  |  
  31. Jadhav, U.U. and H. Hocheng, 2014. Removal of nickel and cadmium from battery waste by a chemical method using ferric sulphate. Environ. Technol., 35: 1263-1268.
    CrossRef  |  Direct Link  |  
  32. Hocheng, H., T. Hong and U.U. Jadhav, 2014. Microbial leaching of waste solder for recovery of metal. Applied Biochem. Biotechnol., 173: 193-204.
    CrossRef  |  Direct Link  |  
  33. Hocheng, H., H.Y. Tsai, U.U. Jadhav, K.Y. Wang and T.C. Lin, 2014. Laser Surface Patterning. In: Comprehensive Materials Processing: Laser Processing and Laser Surface Treatment, Yilbas, B.S. (Ed.). Elsevier, London, UK., pp: 75-113.
  34. Hocheng, H., C. Su and U.U. Jadhav, 2014. Bioleaching of metals from steel slag by Acidithiobacillus thiooxidans culture supernatant. Chemosphere, 117: 652-657.
    CrossRef  |  Direct Link  |  
  35. Hocheng, H. and U.U. Jadhav, 2014. Process of Biological Machining. In: Handbook of Manufacturing Engineering and Technology, Nee, A.Y.C. (Ed.). Springer, UK., pp: 1687-1713.
  36. Hocheng, H. and C.M. Chen, 2014. Design, fabrication and failure analysis of stretchable electrical routings. Sensors, 14: 11855-11877.
    CrossRef  |  Direct Link  |  
  37. Hocheng, H. C.C. Tsao, C.S. Liu and H.A. Chen, 2014. Reducing drilling-induced delamination in composite tube by magnetic colloid back-up. CIRP Ann. Manuf. Technol., 63: 85-88.
    CrossRef  |  Direct Link  |  
  38. Tsai, H.Y., H. Hocheng, K.Y. Wang and S.W. Luo, 2013. Micromachining by Photonic Beams. In: Advanced Analysis of Nontraditional Machining, Hocheng, H. and H.Y. Tsai (Eds.). Springer, New York, ISBN: 978-1-4614-4053-6, pp: 403-451.
  39. Tsai, H.Y., H. Hocheng and Y.L. Huang, 2013. Chemical Mechanical Polishing. In: Advanced Analysis of Nontraditional Machining, Hocheng, H. and H.Y. Tsai (Eds.). Springer, New York, ISBN: 978-1-4614-4053-6, pp: 259-324.
  40. Pan, C.T. and H. Hocheng, 2013. Laser Machining and its Associated Effects. In: Advanced Analysis of Nontraditional Machining, Hocheng, H. and H.Y. Tsai (Eds.). Springer, New York, ISBN: 978-1-4614-4053-6, pp: 1-64.
  41. Pa, P.S. and H. Hocheng, 2013. Electrochemical Machining. In: Advanced Analysis of Nontraditional Machining, Hocheng, H. and H.Y. Tsai (Eds.). Springer, New York, ISBN: 978-1-4614-4053-6, pp: 107-257.
  42. Kuo, K.L., H. Hocheng and C.C. Hsu, 2013. Ultrasonic Machining. In: Advanced Analysis of Nontraditional Machining, Hocheng, H. and H.Y. Tsai (Eds.). Springer, New York, ISBN: 978-1-4614-4053-6, pp: 325-357.
  43. Jadhav, U.U., H. Hocheng and W.H. Weng, 2013. Innovative use of biologically produced ferric sulfate for machining of copper metal and study of specific metal removal rate and surface roughness during process. J. Mater. Process. Technol., 213: 1509-1515.
  44. Jadhav, U.U. and H. Hocheng, 2013. Extraction of silver from spent silver oxide-zinc button cells by Acidithiobacillus ferrooxidans culture supernatant. Int. J. Cleaner Prod., 44: 39-44.
  45. Huang, T.Y., H. Hocheng , T.H. Chou and W.H. Yang, 2013. Bring Free Light to Buildings: Overview of Daylighting System. In: Materials and Processes for Energy, Mendez-Vilas, A. (Ed.). Formatex, Spain, ISBN: 978-84-939843-7-3, pp: 639-648.
  46. Hsu, W.H., H. Hocheng and J.T. Shy, 2013. Surface plasmon resonance as an innovative method for filling defects monitoring in nanoimprint lithography. Applied Surf. Sci., 275: 94-101.
    CrossRef  |  Direct Link  |  
  47. Hsu, W.H., H. Hocheng and J.T. Shy, 2013. A method for in situ measurement of residual layer thickness in nano-imprint lithography. Microelectron. Eng., 110: 132-140.
    CrossRef  |  Direct Link  |  
  48. Hocheng, H., T.C. Lin, U.U. Jadhav and W.S. Wong, 2013. Writing Metal on SiO2 by laser through culture supernatant of Acidithiobacillus ferrooxidans 13820. Microelectron. Eng., 101: 17-22.
    CrossRef  |  Direct Link  |  
  49. Hocheng, H. and H.Y. Tsai, 2013. Advanced Analysis of Nontraditional Machining. Springer, New York, ISBN: 978-1-4614-4053-6, Pages: 500.
  50. Guu, Y.H., C.C. Mai and H. Hocheng, 2013. Applications of Carbon Nanotubes in Nontraditional Machining and Microscopy. In: Carbon Nanotubes: Synthesis, Properties and Applications, Hocheng, H. and H.Y. Tsai (Eds.). Nova Science Publisher, USA., ISBN: 978-1-4614-4053-6, pp: 111-126.
  51. Guu, Y.H. and H. Hocheng, 2013. Electrical Discharge Machining. In: Advanced Analysis of Nontraditional Machining, Hocheng, H. and H.Y. Tsai (Eds.). Springer, New York, ISBN: 978-1-4614-4053-6, pp: 65-106.
  52. Hocheng, H., H.Y. Tsai and K.R. Chang, 2013. Water Jet Machining. In: Advanced Analysis of Nontraditional Machining, Hocheng, H. and H.Y. Tsai (Eds.). Springer, New York, ISBN: 978-1-4614-4053-6, pp: 359-401.
  53. Tsao, C.C., H. Hocheng and Y.C. Chen, 2012. Delamination reduction in drilling composite materials by active backup force. CIRP Ann. Manuf. Technol., 61: 91-94.
  54. Mai, C., H. Hocheng and S. Huang, 2012. Advantages of carbon nanotubes in electrical discharge machining. Int. J. Adv. Manuf. Technol., 59: 111-117.
    CrossRef  |  Direct Link  |  
  55. Jadhav, U.U. and H. Hocheng, 2012. A review of recovery of metals from industrial waste. J. Achiev. Mater. Manuf. Eng., 54: 159-167.
  56. Hung, J.N. and H. Hocheng, 2012. Frequency effects and life prediction of polysilicon microcantilever beams in bending fatigue. J. Micro/ Nanolithography MEMS MOEMS, Vol. 11. 10.1117/1.JMM.11.2.021206.
    CrossRef  |  Direct Link  |  
  57. Hocheng, H., W.H. Weng and J.H. Chang, 2012. Shape effects of micromechanical cantilever sensor. Measurement, 45: 2081-2088.
    CrossRef  |  Direct Link  |  
  58. Hocheng, H., U.U. Jadhav and J.H. Chang, 2012. Biomachining rates of various metals by Acidithiobacillus thiooxidans. Int. J. Surf. Sci. Eng., 6: 101-111.
  59. Hocheng, H., K.E. Chang and J.H. Chang, 2012. Threshold of laser-activated writing of metal using microbe metabolite. Int. J. Mach. Tools Manuf., 53: 51-57.
    CrossRef  |  Direct Link  |  
  60. Hocheng, H., J.H. Chang, H.S. Hsu, H.J. Han, Y.L. Chang and U.U. Jadhav, 2012. Metal removal by Acidithiobacillus ferrooxidans through cells and extra-cellular culture supernatant in biomachining. CIRP J. Manuf. Sci. Technol., 5: 137-141.
    CrossRef  |  Direct Link  |  
  61. Hocheng, H., J.H. Chang and U.U. Jadhav, 2012. Micromachining of various metals by using Acidithiobacillus ferrooxidans 13820 culture supernatant experiments. J. Cleaner Prod., 20: 180-185.
    CrossRef  |  Direct Link  |  
  62. Hocheng, H., J.H. Chang and U.U. Jadhav, 2012. Biomachining-Acidithiobacillus Genus-Based Metal Removal. In: Micromanufacturing Processes, Jain, V.K. (Ed.). CRC Press, USA., pp: 99-112.
  63. Hocheng, H., 2012. Machining Technology of Composite Materials: Principles and Practice. Woodhead Publishing, Cambridge, ISBN: 978-0-8570-9030-0, Pages: 488.
  64. Hocheng, H. and C.C. Tsao, 2012. Micromechanisms of Delamination in Composite Materials Induced by Drilling. In: Encyclopedia of Composites, Nicolais, L. and A. Borzacchiello (Eds.). 2nd Edn., John Wiley and Sons, USA., ISBN: 978-0-470-12828-2, pp: 1-16.
  65. Hung, J.N., H. Hocheng and K. Sato, 2011. Torsion fatigue testing of polycrystalline silicon cross-microbridge structures. Japanese J. Applied Phys., Vol. 50. 10.1143/JJAP.50.06GM07/meta.
    CrossRef  |  Direct Link  |  
  66. Hocheng, H., W.H. Hsu and J.T. Shy, 2011. In-situ monitoring of pattern filling in nano-imprint lithography using surface plasmon resonance. J. Nanosci. Nanotechnol., 11: 5279-5284.
    CrossRef  |  Direct Link  |  
  67. Hocheng, H., T.Y. Huang, T.H. Chou and W.H. Yang, 2011. Microstructural fabrication and design of sunlight guide panels of inorganic-organic hybrid material. Energy Build., 43: 1011-1019.
    CrossRef  |  Direct Link  |  
  68. Hocheng, H. and W.H. Hsu, 2011. Process Monitoring for Nanoimprint Lithography. In: Advances in Microelectronics and Photonics, Jit, S. (Ed.). Nova Science Publisher, USA., ISBN: 978-1-61470-956-5, pp: 395-414.
  69. Hocheng, H. and K.Y. Wang, 2011. Analysis of Excimer Laser Machining of Micropatterns. LAP Lambert Academic Publishing, Germany, ISBN: 978-3-8443-9569-3, Pages: 124.
  70. Chou, T.H., W.H. Yang, T.Y. Huang and H. Hocheng, 2011. Roll-to-roll embossing of sunlight guide film with wide outgoing angle. Int. J. Automat. Technol., 5: 212-217.
    Direct Link  |  
  71. Hocheng, H., T.Y. Huang, T.H. Chou and W.H. Yang, 2010. A brighter place: Overview of microstructured sunlight guide. J. Achiev. Mater. Manuf. Eng., 43: 409-417.
    Direct Link  |  
  72. Hocheng, H., C.M. Chen, Y.C. Chou and C.H. Lin, 2010. Study of novel electrical routing and integrated packaging on bio-compatible flexible substrates. Microsyst. Technol., 16: 423-430.
    CrossRef  |  Direct Link  |  
  73. Hocheng, H. and T.T. Wen, 2010. Submicron imprint of trench structures by external and intrinsic electromagnetic force. CIRP Ann. Manuf. Technol., 59: 263-266.
    CrossRef  |  
  74. Wen, T.T. and H. Hocheng, 2009. Innovative rapid replication of microlens arrays using electromagnetic force-assisted UV imprinting. J. Micromech. Microeng., Vol. 19. 10.1088/0960-1317/19/2/025012.
    CrossRef  |  Direct Link  |  
  75. Hocheng, H., J.C. Wang, J.H. Chang and W.C. Shen, 2009. Laser-guided Pattern Writing through Thiobacillus ferrooxidans metabolite. Microelectron. Eng., 86: 565-568.
    CrossRef  |  Direct Link  |  
  76. Hocheng, H. and W.S. Hsu, 2009. An innovative method for uniform pattern transfer in nanoimprint. J. NanoSci. NanoTechnol., 9: 4267-4272.
    CrossRef  |  Direct Link  |  
  77. Hocheng, H. and C.C. Tsao, 2009. A Treatment of Drilling-Induced Delamination of Composite Materials. In: Drilling of Composite Materials, Davim, J.P. (Ed.). Nova Science Publishers, USA., ISBN: 978-1-60741-163-5, pp: 1-43.
  78. Tsao, C.C. and H. Hocheng, 2008. Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network. J. Mater. Process. Technol., 203: 342-348.
    CrossRef  |  Direct Link  |  
  79. Tsao, C.C. and H. Hocheng, 2008. Effects of peripheral drilling moment on delamination using special drill bits. J. Mater. Process. Technol., 201: 471-476.
    CrossRef  |  Direct Link  |  
  80. Tsao, C.C. and H. Hocheng, 2008. Analysis of delamination in drilling composite materials by core-saw drill. Int. J. Mater. Prod. Technol., 32: 188-201.
    Direct Link  |  
  81. Hocheng, H., T.T. Wen and S.Y. Yang, 2008. Replication of microlens arrays by gas-assisted hot embossing. Mater. Manuf. Processes, 23: 261-268.
    CrossRef  |  Direct Link  |  
  82. Hocheng, H., J.N. Hung and Y.H. Guu, 2008. Various fatigue testing of polysilicon microcantilever beam in bending. Japanese J. Applied Phys., 47: 5256-5261.
  83. Hocheng, H. and T.T. Wen, 2008. Electromagnetic force-assisted imprint technology for fabrication of submicron-structure. Microelectron. Eng., 85: 1652-1657.
    CrossRef  |  Direct Link  |  
  84. Hocheng, H. and K.Y. Wang, 2008. Microgroove pattern machined by excimer laser dragging. Int. J. Manuf. Technol. Manage., 13: 241-253.
    CrossRef  |  Direct Link  |  
  85. Hocheng, H. and C. Tseng, 2008. Mechanical and optical design for assembly of vascular endothelial cells using laser guidance and tweezers. Opt. Commun., 281: 4435-4441.
    CrossRef  |  Direct Link  |  
  86. Guu, Y.H., H. Hocheng and C.H. Chang, 2008. Study of piezoelectrically actuated micropumps with multiple parallel chambers. Mater. Manuf. Processes, 23: 209-214.
    CrossRef  |  Direct Link  |  
  87. Chang, J.H., H. Hocheng, H.Y. Chang and A. Shih, 2008. Metal removal rate of thiobacillus thiooxidans without pre-secreted metabolite. J. Mater. Process. Technol., 201: 560-564.
    CrossRef  |  Direct Link  |  
  88. Tsao, C.C. and H. Hocheng, 2007. Parametric study on thrust force of core drill. J. Mater. Process. Technol., 192: 37-40.
    CrossRef  |  Direct Link  |  
  89. Tsao, C.C. and H. Hocheng, 2007. Effect of tool wear on delamination in drilling composite materials. Int. J. Mech. Sci., 49: 983-988.
    CrossRef  |  Direct Link  |  
  90. Pa, P.S. and H. Hocheng, 2007. Design of rib plate of electrode in electrochemical smoothing and electrobrightening of large hole. Int. J. Adv. Manuf. Technol., 34: 517-526.
    CrossRef  |  Direct Link  |  
  91. Hocheng, H. and Y.L. Huang, 2007. In situ endpoint detection by acoustic emissions in chemical-mechanical polishing of metal overlay. IEEE Trans. Semiconductor Manuf., 20: 306-312.
    CrossRef  |  Direct Link  |  
  92. Hocheng, H. and W.S. Hsu, 2007. Effects of back grooves on improving uniformity in nanoimprint lithography. Japanese J. Applied Phys., 46: 6370-6372.
  93. Hocheng, H. and P.S. Pa, 2007. A review of electrode design for electrochemical drilling and electropolishing of holes. Curr. Topics Electrochem., 12: 33-49.
  94. Hocheng, H. and K.Y. Wang, 2007. Analysis and fabrication of minifeature lamp lens by excimer laser micromachining. Applied Opt., 46: 7184-7189.
    CrossRef  |  Direct Link  |  
  95. Hocheng, H. and C.C. Tsao, 2007. Computerized tomography and c-scan for measuring drilling-induced delamination in composite material using twist drill and core drill. Key Eng. Mater., 339: 16-20.
    CrossRef  |  Direct Link  |  
  96. Hocheng, H. and C.C. Nien, 2007. A review of monitoring for nanoimprinting. J. Achiev. Mater. Manuf. Eng., 24: 382-389.
    Direct Link  |  
  97. Pa, P.S. and H.H. Cheng, 2006. Using borer-shape electrode in electrochemical smoothing of hole. Mater. Sci. Forum, 505-507: 793-798.
    CrossRef  |  Direct Link  |  
  98. Lin, Y.C., H. Hocheng, W.L. Fang and R. Chen, 2006. Fabrication and fatigue testing of an electrostatically driven microcantilever beam. Mater. Manuf. Processes, 21: 75-80.
    CrossRef  |  Direct Link  |  
  99. Hocheng, H. and C.C. Taso, 2006. Effects of special drill bits on drilling-induced delamination of composite materials. Int. J. Mach. Tools Manuf., 46: 1403-1416.
    CrossRef  |  Direct Link  |  
  100. Hocheng, H. and C.C. Nien, 2006. In-situ monitoring of cavity filling in nanoimprint by capacitance. Japanese J. Applied Phys., 45: 5590-5596.
    CrossRef  |  Direct Link  |  
  101. Hocheng, H. and C. Tseng, 2006. A laser guiding and tweezers platform for cardiovascular endothelia assembly. J. Biomech., 39: S311-S311.
  102. Cheng, H.H., S.Y. Lin and W.T. Lei, 2006. Surface finish in machining of dental ceramics. Mater. Sci. Forum, 505-507: 1231-1236.
    CrossRef  |  Direct Link  |  
  103. Cheng, H.H. and C.C. Chen, 2006. Chemical-assisted mechanical polishing of diamond film on wafer. Mater. Sci. Forum, 505-507: 1225-1230.
    CrossRef  |  Direct Link  |  
  104. Chen, S.Y., S.C. Lin and H.H. Cheng, 2006. Polishing glass-ceramic based rigid disk. Mater. Sci. Forum, 505-507: 1213-1218.
    CrossRef  |  Direct Link  |  
  105. Hocheng, H. and C.C. Nien, 2006. Numerical analysis of effects of mold features and contact friction on cavity filling in the nanoimprinting process. J. Microfabrication Microlithography Micromach., Vol. 5. 10.1117/1.2177286.
    CrossRef  |  Direct Link  |  
  106. Tsao, C.C. and H. Hocheng, 2005. Effects of exit back-up on delamination in drilling composite materials using a saw drill and a core drill. Int. J. Mach. Tools Manuf., 45: 1261-1270.
    CrossRef  |  Direct Link  |  
  107. Tsao, C.C. and H. Hocheng, 2005. Effect of eccentricity of twist drill and candle stick drill on delamination in drilling composite materials. Int. J. Mach. Tools Manuf., 45: 125-130.
  108. Tsao, C.C. and H. Hocheng, 2005. Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills. Int. J. Mach. Tools Manuf., 45: 1282-1287.
    CrossRef  |  Direct Link  |  
  109. Lin, S.C., H.C. Huang and H. Hocheng, 2005. Effects of slurry components on the surface characteristics when chemical mechanical polishing NiP/Al substrate. Thin Solid Film, 483: 400-406.
    CrossRef  |  Direct Link  |  
  110. Lin, J.B., S.C. Lin and H. Hocheng, 2005. A simulation approach of dishing in chemical mechanical polishing of inlaid copper structures. J. Electrochem. Soc., 152: 664-668.
    CrossRef  |  Direct Link  |  
  111. Hocheng, H., P.S. Kao and S.C. Lin, 2005. Generation of erosion profile of through hole in electrochemical boring using a stepwise moving electrode. Int. J. Manuf. Technol. Manage., 7: 268-286.
    CrossRef  |  Direct Link  |  
  112. Hocheng, H., P.S. Gao and S.C. Lin, 2005. Development of the eroded opening during electrochemical boring of hole. Int. J. Adv. Manuf. Technol., 25: 1105-1112.
    CrossRef  |  Direct Link  |  
  113. Hocheng, H. and C.C. Tsao, 2005. The path towards delamination-free drilling of composite materials. J. Mater. Process. Technol., 167: 251-264.
    CrossRef  |  Direct Link  |  
  114. Hocheng, H. and C.C. Nien, 2005. In-situ monitoring method and system for mold deformation in nanoimprint. Knowl. Bridge, 56: 2-3.
  115. Tsao, C.C. and H. Hocheng, 2004. Taguchi analysis of delamination associated with various drill bits in drilling of composite material. Int. J. Mach. Tools Manuf., 44: 1085-1090.
    CrossRef  |  Direct Link  |  
  116. Hocheng, H., 2004. Student moral education from parents perspective. Students Counseling, 92: 115-117.
  117. Hocheng, H., 2004. A discussion of the revised school mathematics curriculum standards in Taiwan. New Waves-Educ. Res. Dev., 3: 1-4.
  118. Hocheng, H. and Y.L. Huang, 2004. In situ endpoint detection by pad temperature in chemical-mechanical polishing of copper overlay. IEEE Trans. Semiconductor Manuf., 17: 180-187.
    CrossRef  |  Direct Link  |  
  119. Hocheng, H. and P.S. Pa, 2004. Design of arrow-head electrode in electropolishing of cylindrical part. Int. J. Mater. Prod. Technol., 20: 312-326.
    Direct Link  |  
  120. Hocheng, H. and P.S. Pa, 2004. An innovative method of electropolishing process. Knowl. Bridge, 43: 3-4.
  121. Hocheng, H. and M.L. Hsieh, 2004. Signal analysis of surface roughness in diamond turning of lens molds. Int. J. Mach. Tools Manuf., 44: 1607-1618.
  122. Hocheng, H. and K.L. Kuo, 2004. A monitoring device of tool wear for ultrasonic polishing. Knowl. Bridge, 44: 1-1.
  123. Hocheng, H. K.S. Kao and W.L. Fang, 2004. Fatigue life of a microcantilever beam in bending. J. Vacuum Sci Technol. B: Microelectron. Nanometer Struct., 22: 3143-3146.
  124. Tsao, C.C. and H. Hocheng, 2003. The effect of chisel length and associated pilot hole on delamination when drilling composite materials. Int. J. Mach. Tools Manuf., 43: 1087-1092.
  125. Pa, P.S. and H. Hocheng, 2003. Continuous secondary ultrasonic electropolishing of an SKD61 cylindrical part. Int. J. Adv. Manuf. Technol., 21: 238-242.
    CrossRef  |  Direct Link  |  
  126. Hocheng, H., Y.H. Sun, S.C. Lin and P.S. Kao, 2003. A material removal analysis of electrochemical machining using flat-end cathode. J. Mater. Process. Technol., 140: 264-268.
    CrossRef  |  Direct Link  |  
  127. Hocheng, H., C.T. Pan and C.C. Cheng, 2003. Formation of microlens by reflow of dual photoresist. Japanese J. Applied Phys., 42: 4044-4047.
    CrossRef  |  Direct Link  |  
  128. Hocheng, H. and Y.L. Huang, 2003. A comprehensive review of endpoint detection in chemical mechanical planarisation for deep-submicron integrated circuits manufacturing. Int. J. Mater. Prod. Technol., 18: 469-486.
    CrossRef  |  Direct Link  |  
  129. Hocheng, H. and P.S. Pa, 2003. Electropolishing of cylindrical workpiece of tool materials using disc-form electrodes. J. Mater. Process. Technol., 142: 203-212.
    CrossRef  |  Direct Link  |  
  130. Hocheng, H. and P.S. Pa, 2003. Effective form design of electrode in electrochemical smoothing of holes. Int. J. Adv. Manuf. Technol., 21: 995-1004.
  131. Hocheng, H. and P.S. Gao, 2003. Optimization of electrochemical polishing of stainless steel by grey relational analysis. J. Mater. Process. Technol., 140: 255-259.
    CrossRef  |  Direct Link  |  
  132. Hocheng, H. and C.C. Tsao, 2003. Comprehensive analysis of delamination in drilling of composite materials with various drill bits. J. Mater. Process. Technol., 140: 335-339.
    CrossRef  |  
  133. Hocheng, H. and C.C. Tsao, 2003. Analysis of delamination in drilling composite materials using core drill. Aust. J. Mech. Eng., 1: 49-53.
  134. Guu, Y.H., H. Hocheng, C.Y. Chou and C.S. Deng, 2003. Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steel. Mater. Sci. Eng.: A, 358: 37-43.
    CrossRef  |  Direct Link  |  
  135. Wang, C.C., S.C. Lin and H. Hocheng, 2002. A material removal model for polishing glass-ceramic and aluminum magnesium storage disk. Int. J. Mach. Tools Manuf., 42: 979-984.
  136. Tsai, H.H. and H. Hocheng, 2002. Prediction of thermal-induced concave surface of workpiece in surface grinding. J. Mater. Process. Technol., 122: 148-159.
  137. Tsai, H.H. and H. Hocheng, 2002. On-line identification for thermal-induced convex deformation of workpiece in surface grinding. J. Mater. Process. Technol., 121: 189-201.
  138. Hocheng, H. and P.S. Pa, 2002. The application of a turning tool as the electrode in electropolishing. J. Mater. Process. Technol., 120: 6-12.
    CrossRef  |  Direct Link  |  
  139. Hocheng, H. and K.L. Kuo, 2002. On-line tool wear monitoring during ultrasonic machining using tool resonance frequency. J. Mater. Process. Technol., 123: 80-84.
    CrossRef  |  Direct Link  |  
  140. Hocheng, H. and K.L. Kuo, 2002. Fundamental study of ultrasonic polishing of mold steel. Int. J. Mach. Tools Manuf., 42: 7-13.
    CrossRef  |  Direct Link  |  
  141. Hocheng, H. and C.Y. Cheng, 2002. Visualized characterization of fluid film between wafer and pad during chemical mechanical planarization. IEEE Trans. Semiconductor Manuf., 15: 45-50.
  142. Hocheng, H. and C.H. Weng, 2002. Hydraulic erosion of concrete by a submerged jet. J. Mater. Eng. Performance, 11: 256-261.
  143. Chung-Chen, T. and H. Hong, 2002. Comparison of the tool life of tungsten carbides coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi method. J. Mater. Process. Technol., 123: 1-4.
    CrossRef  |  Direct Link  |  
  144. Tsai, H.H. and H. Hocheng, 2001. Monitoring strategy of thermal-induced convex deformation of workpiece in surface grinding. Int. J. Adv. Manuf. Technol., 17: 710-714.
    CrossRef  |  Direct Link  |  
  145. Pan, C.T. and H. Hocheng, 2001. Evaluation of anisotropic thermal conductivity for unidirectional FRP in laser machining. Compos. Part A: Applied Sci. Manuf., 32: 1657-1667.
    CrossRef  |  Direct Link  |  
  146. Jeng, F.S., T.H. Huang, Y.C. Lu and H. Hocheng, 2001. Threshold condition for penetrating rocks using high pressure waterjet. J. Civil Hydraulic Eng., 13: 677-681.
  147. Hocheng, H., P.S. Kao and Y.F. Chen, 2001. Electropolishing of 316L stainless steel for anticorrosion passivation. J. Mater. Eng. Performance, 10: 414-418.
    CrossRef  |  Direct Link  |  
  148. Hocheng, H., H.Y. Tsai and Y.T. Su, 2001. Modeling and experimental analysis of the material removal rate in the chemical mechanical planarization of dielectric films and bare silicon wafers. J. Electrochem. Soc., 148: G581-G586.
    CrossRef  |  Direct Link  |  
  149. Hocheng, H. and P.S. Pa, 2001. Electrode form design and ultrasonic aid in electropolishing of holes. Int. J. Electr. Mach., 6: 33-39.
  150. Guu, Y.H., H. Hocheng, N.H. Tai and S.Y. Liu, 2001. Effect of electrical discharge machining on the characteristics of carbon fiber reinforced carbon composites. J. Mater. Sci., 36: 2037-2043.
    CrossRef  |  Direct Link  |  
  151. Guu, Y.H. and H. Hocheng, 2001. Improvement of fatigue life of electrical discharge machined AISI D2 tool steel by TiN coating. Mater. Sci. Eng.: A, 318:: 155-162.
    CrossRef  |  Direct Link  |  
  152. Guu, Y.H. and H. Hocheng, 2001. High cycle fatigue of electrical-discharge machined AISI D2 tool steel. Int. J. Mater. Prod. Technol., 16: 642-657.
    CrossRef  |  Direct Link  |  
  153. Guu, Y.H. and H. Hocheng, 2001. Effects of workpiece rotation on machinability during electrical-discharge machining. Mater. Manuf. Processes, 16: 91-101.
    CrossRef  |  Direct Link  |  
  154. Cheng, H H., H.Y. Tsai and Y.L. Huang, 2001. Essential aspects of chemical mechanical planarization for oxide semiconductor. Key Eng. Mater., 196: 1-24.
    CrossRef  |  Direct Link  |  
  155. Chang, Y. and H. Hocheng, 2001. The flowability of bentonite bonded green molding sand. J. Mater. Process. Technol., 113: 238-244.
    CrossRef  |  Direct Link  |  
  156. Hocheng, H., N.H. Tai and C.H. Liu, 2000. Assessment of ultrasonic drilling of C/SiC composite material. Compos. Part A: Applied Sci. Manuf., 31: 133-142.
    CrossRef  |  Direct Link  |  
  157. Hocheng, H., H.Y. Tsai and M.S. Tsai, 2000. Effects of kinematic variables on nonuniformity in chemical mechanical planarization. Int. J. Mach. Tools Manuf., 40: 1651-1669.
    CrossRef  |  Direct Link  |  
  158. Hocheng, H. and P.S. Pa, 2000. Ring-form electrode in electropolishing of external cylindrical surface. Int. J. Electr. Mach., 5: 7-15.
  159. Hocheng, H. and M.Y. Hsu, 2000. Erosion wear of stainless steel by abrasives entrained in a water jet. Arabian J. Sci. Eng., 25: 189-202.
    Direct Link  |  
  160. Uhlmann, E., G. vSpur, H. Hocheng, S. Liebelt and C.T. Pan, 1999. The extent of laser-induced thermal damage of UD and crossply composite laminates. Int. J. Mach. Tools Manuf., 39: 639-650.
    CrossRef  |  Direct Link  |  
  161. Tai, N.H., K.P. Lee, H. Hocheng and C.S. Liu, 1999. Processing and characterization of carbon fiber reinforced ceramic nanocomposites. Key Eng. Mater., 164-165: 105-108.
    Direct Link  |  
  162. Puw, H.Y. and H. Hocheng, 1999. Milling of Polymer Composites. In: Machining of Ceramics and Composites, Jahanmir, S. and M. Ramulu (Eds.). Marcel Dekker, New York, pp: 267-294.
  163. Hocheng, H., Y.L. Huang and L.J. Chen, 1999. Kinematic analysis and measurement of temperature rise on a pad in chemical mechanical planarization. J. Electrochem. Soc., 146: 4236-4239.
    CrossRef  |  Direct Link  |  
  164. Hocheng, H., K.L. Kuo and J.T. Lin, 1999. Machinability of zirconia ceramics in ultrasonic drilling. Mater. Manuf. Processes, 14: 713-724.
    CrossRef  |  Direct Link  |  
  165. Hocheng, H., C.L. Kuo and S.W. Wei, 1999. Electropolishing of a spherical surface and the application of fuzzy inference. Int. J. Electr. Mach., 4: 19-28.
    Direct Link  |  
  166. Hocheng, H. and P.S. Pa, 1999. Electropolishing and electrobrightening of holes using different feeding electrodes. J. Mater. Process. Technol., 89: 440-446.
    CrossRef  |  Direct Link  |  
  167. Hocheng, H. and H.Y. Tsai, 1999. A material removal model in chemical mechanical planarization of silicon dioxide film and bare silicon wafer. Int. J. Chem. Mech. Planarization, 1: 90-101.
  168. Hocheng, H. and C.T. Pan, 1999. The effects of cryogenic surroundings on thermal-induced damage in laser grooving of fiber-reinforced plastic. Mach. Sci. Technol., 3: 77-90.
    CrossRef  |  Direct Link  |  
  169. Tsai, H.H. and H. Hocheng, 1998. Investigation of the transient thermal deflection and stresses of the workpiece in surface grinding with the application of a cryogenic magnetic chuck. J. Mater. Process. Technol., 79: 177-184.
    CrossRef  |  Direct Link  |  
  170. Tsai, H.H. and H. Hocheng, 1998. Analysis of transient thermal bending moments and stresses of the workpiece during surface grinding. J. Thermal Stresses, 21: 691-711.
    CrossRef  |  Direct Link  |  
  171. Puw, H.Y. and H. Hocheng, 1998. Chip formation model of cutting fiber-reinforced plastics perpendicular to fiber axis. J. Manuf. Sci. Eng., 120: 192-196.
    CrossRef  |  Direct Link  |  
  172. Pan, C.T. and H. Hocheng, 1998. Prediction of laser-induced thermal damage of fiber mat and fiber MatUD reinforced polymers. J. Mater. Eng. Performance, 7: 751-756.
    CrossRef  |  Direct Link  |  
  173. Pan, C.T. and H. Hocheng, 1998. Prediction of extent of heat affected zone in laser grooving of unidirectional fiber-reinforced plastics. J. Eng. Mater. Technol., 120: 321-327.
    CrossRef  |  Direct Link  |  
  174. Hocheng, H., Y.H. Guu and N.H. Tai, 1998. The feasibility analysis of electrical-discharge machining of carbon-carbon composites. Mater. Manuf. Process, 13: 117-132.
    CrossRef  |  Direct Link  |  
  175. Tsai, H.H. and H. Hocheng, 1997. Monitoring of creep-in depth beyond the initial wheel/workpiece contact in surface grinding by acoustic emission. J. Mach. Sci. Technol., 1: 15-32.
    CrossRef  |  Direct Link  |  
  176. Hocheng, H., W.T. Lei and H.H. Hsu, 1997. Preliminary study of material removal in electrical-discharge machining of SiC/Al. J. Mater. Process. Technol., 63: 813-818.
    CrossRef  |  Direct Link  |  
  177. Hocheng, H., S.W. Wei and P.S. Pa, 1997. Electropolishing technology. J. Mechatronic Ind., 170: 122-128.
  178. Hocheng, H., S.B. Yen, T. Ishihara and B.K. Yen, 1997. Fundamental turning characteristics of a tribology-favored graphite/aluminum alloy composite material. Compos. Part A: Applied Sci. Manuf., 28: 883-890.
    CrossRef  |  Direct Link  |  
  179. Hocheng, H., H.Y. Tsai, J.J. Shiue and B. Wang, 1997. Feasibility study of abrasive-waterjet milling of fiber-reinforced plastics. J. Manuf. Sci. Eng., 119: 133-142.
    CrossRef  |  Direct Link  |  
  180. Tsai, H.H. and H. Hocheng, 1996. Numerical investigation of transient thermal stresses of workpiece in surface grinding. J. Thermal Stresses, 19: 565-578.
    CrossRef  |  Direct Link  |  
  181. Pan, C.T. and H. Hocheng, 1996. The anisotropic heat-affected zone in the laser grooving of fiber-reinforced composite material. J. Mater. Process. Technol., 62: 54-60.
    CrossRef  |  Direct Link  |  
  182. Hocheng, H. and H.C. Chen, 1996. Mechanical design of major components of the single pole carriage in <>. Tsing Hua J. Chin. Stud., 25: 419-450.
  183. Hocheng, H., 1995. Critical matrix yielding stress and interfacial fracture in forming of metal matrix composite wires. JSME Int. J., 38: 625-630.
    CrossRef  |  Direct Link  |  
  184. Hocheng, H. and C.C. Hsu, 1995. Preliminary study of ultrasonic drilling of fiber-reinforced plastics. J. Mater. Process. Technol., 48: 255-266.
    CrossRef  |  Direct Link  |  
  185. Hocheng, H. and K.R. Chang, 1994. Material removal analysis in abrasive waterjet cutting of ceramic plates. J. Mater. Process. Technol., 40: 287-304.
    Direct Link  |  
  186. Puw, H.Y. and H. Hocheng, 1993. Machinability test of carbon fiber-reinforced plastics in milling. Mater. Manuf. Process, 8: 717-729.
    CrossRef  |  Direct Link  |  
  187. Hocheng, H., H.Y. Pwu and K.C. Yao, 1993. Machinability of some fiber-reinforced thermoset and thermoplastics in drilling. Mater. Manuf. Process, 8: 653-682.
    CrossRef  |  Direct Link  |  
  188. Hocheng, H., H.Y. Pwu and K.C. Yao, 1993. A study of drilling of fiber-reinforced plastic composite materials. J. Mechatronic Ind., 120: 180-194.
  189. Hocheng, H., H.Y. Puw and Y. Huang, 1993. Preliminary study on milling of unidirectional carbon fibre-reinforced plastics. Compos. Manuf., 4: 103-108.
    CrossRef  |  Direct Link  |  
  190. Hocheng, H. and H.Y. Puw, 1993. Machinability of fiber-reinforced thermoplastics in drilling. J. Eng. Mater. Technol., 115: 146-149.
    CrossRef  |  Direct Link  |  
  191. Hocheng, H. and C.C. Hsu, 1993. Preliminary investigation of ultrasonic drilling of composite materials. Mach. Monthly, 218: 119-133.
  192. Hocheng, H. and S.C. Leu, 1992. Machining characteristics of carbon fiber-reinforced epoxy tube in turning. Composites, 32: 136-140.
    Direct Link  |  
  193. Hocheng, H. and H.Y. Puw, 1992. On drilling characteristics of fiber-reinforced thermoset and thermoplastics. Int. J. Mach. Tools Manufacture, 32: 583-592.
    Direct Link  |  
  194. Hocheng, H. and C.L. Jiaa, 1991. Reliability monitoring in drilling electronic circuit boards. J. Electron. Packaging, 113: 263-267.
    CrossRef  |  Direct Link  |  
  195. Ho-Cheng, H., 1990. A failure analysis of water jet drilling in composite laminates. Int. J. Mach. Tools Manufacture, 30: 423-429.
    Direct Link  |  
  196. Ho-Cheng, H. and C.K.H. Dharan, 1990. Delamination during drilling in composite Laminates. J. Eng. Ind., 112: 236-239.
    CrossRef  |  Direct Link  |