Dr. Cengiz Guler
My Social Links

Dr. Cengiz Guler

Professor
Duzce University, Tukey


Highest Degree
Ph.D. in Forestry and Wood Sciences from Zonguldak Karaelmas University, Turkiye

Share this Profile

Biography

My field of work is wood-based composite materials. In particular, I worked on the recycling of agricultural wastes. Recently, I have been working on the production of block type particle board. I worked at The Center for Renewable Carbon, in the University of Tennessee, Institute of Agriculture for 3 months. I am currently the head of the Department of Forest Industry Engineering in Duzce-Turkiye

Area of Interest:

Wood Products Engineering
100%
Wood Product Technology
62%
Wood Composite
90%
Wood Science and Technology
75%
Wood Materials Technology
55%

Research Publications in Numbers

Books
0
Chapters
0
Articles
23
Abstracts
0

Selected Publications

  1. Güler, C. and V. Doğan, 2022. Investigation of the possibilities of using sanding powder in MDF production. J. Furniture Wood Mater. Res., 5: 1-7.
    CrossRef  |  Direct Link  |  
  2. Güler, C. and S. Kulaç, 2020. The coast redwood grows in Turkey (Sequoia sempervirens Lamb. Endla.) Of wood physical, chemical and mechanical properties. Bartın J. Faculty For., Vol. 22. 10.24011/barofd.767111.
    CrossRef  |  Direct Link  |  
  3. Guler, C. and B. Dilek, 2020. Investigation of high-frequency vacuum drying on physical and mechanical properties of common oak (Quercus robur) and common walnut (Juglans regia) lumber. BioResources, 15: 7861-7871.
    CrossRef  |  Direct Link  |  
  4. Güler, C. and Ö.E. Simsek, 2019. Investigation of the combustion properties of medium density fibreboards (MDF) produced in the fabrication environment. Bartın J. Faculty For., Vol. 21. 10.24011/barofd.508639.
    CrossRef  |  Direct Link  |  
  5. Şahin, H.İ. and C. Güler, 2018. The effect of heat treatment on the dimensional stability of ash (Fraxinus angustifolia Vahl.) wood. J. Faculty For. Istanbul Uni., 68: 42-52.
    CrossRef  |  Direct Link  |  
  6. Guler, C. and M. Ibis, 2018. Optimization of raw material resources in particleboard production and investigation in technological aspects. Düzce Univ. J. Sci. Technol., 6: 808-817.
    CrossRef  |  Direct Link  |  
  7. Guler, C., H.I. Sahin and S. Aliogullari, 2015. Effect of spacing on some mechanical properties of narrow leaved ash (Fraxinus angustifolia) wood. Maderas-Cienc Tecnol., 17: 773-788.
    CrossRef  |  Direct Link  |  
  8. Guler, C., 2015. Production of particleboards from licorice (Glycyrrhiza glabra) and European black pine (Pinus Nigra Arnold) wood particles. Scient. Res. Essays, 10: 273-278.
    CrossRef  |  Direct Link  |  
  9. Guler, C. and U. Buyuksari, 2011. Effect of production parameters on the physical and mechanical properties of particleboards made from peanut (Arachis hypogaea L.) hull. BioResources, 6: 5027-5036.
    Direct Link  |  
  10. Buyuksari, U., T. Akbulut, C. Guler and N. As, 2011. Wettability and surface roughness of natural and plantation-grown narrow-leaved ash (fraxinus angustifolia vahl.) wood. BioResour., 6: 4721-4730.
    Direct Link  |  
  11. Akgul, M., C. Guler and Y. Copur, 2010. Certain physical and mechanical properties of medium density fiberboards manufactured from blends of corn (Zea mays indurata Sturt.) stalks and pine (Pinus nigra) wood. Turk. J. Agric. For., 34: 197-206.
    CrossRef  |  Direct Link  |  
  12. Akgul, M., C. Guler and B. Uner, 2010. Opportunities in utilization of agricultural residues in bio-composite production: Corn stalk (Zea mays indurata Sturt) and oak wood (Quercus robur L.) fiber in medium density fiberboard. Afr. J. Biotechnol., 9: 5090-5098.
    Direct Link  |  
  13. Guler, C., Y. Copur and U. Buyuksari, 2009. Producıng particleboards from hazelnut Coryllus avellana L. husk and european black pine pinus nigra arnold. Wood Res., 54: 125-132.
  14. Guler, C., Y. Copur and C. Tascioglu, 2008. The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and european black pine (Pinus nigra Arnold) wood chips. Bioresour. Technol., 99: 2893-2897.
    CrossRef  |  PubMed  |  Direct Link  |  
  15. Copur, Y., C. Guler, C. Tascıoglu and A. Tozluoglu, 2008. Incorporation of hazelnut shell and husk in MDF production. Bioresour. Technol., 99: 7402-7406.
    CrossRef  |  Direct Link  |  
  16. Guler, C., Y. Copur, M. Akgul and U. Buyuksari, 2007. Some chemical, physical and mechanical properties of juvenile wood from black pine (Pinus nigra Arnold) plantations. J. Applied Sci., 7: 755-758.
    CrossRef  |  Direct Link  |  
  17. Copur, Y., C. Guler, M. Akgul and C. Tascioglu, 2007. Some chemical properties of hazelnut husk and its suitability for particleboard production. Build Environ., 42: 2568-2572.
    CrossRef  |  Direct Link  |  
  18. Guler, C., I. Bektas and H. Kalaycıoglu, 2006. The experimental particleboard manufacture from sunflower stalks (Helianthus annuus L.) and Calabrian pine (Pinus brutia Ten.). For. Prod. J., 56: 56-60.
    Direct Link  |  
  19. Bektas, I., C. Guler, H. Kalaycioglu, F. Mengenoglu and M. Nacar, 2005. The manufacture of particleboards using sunflower stalks (Helianthus annuus I.) and poplar wood (Populus alba L.). J. Compos. Mater., 39: 467-473.
    Direct Link  |  
  20. Guler, C. and R. Ozen, 2004. Some properties of particleboards made from cotton stalks (Gossypium hirsitum L.). Holz als Roh-und Werkstoff, 62: 40-43.
    CrossRef  |  Direct Link  |  
  21. Guler, C. and M. Akgul, 2002. The use of wood and agricultural residues in the energy production. Harran Univ. GAP IV. Eng. Ccongress, 2: 1653-1658.
  22. Bektas, I., C. Guler and M.A. Basturk, 2002. Principal mechanical properties of eastern beech wood (Fagus orientalis Lipsky.) Naturally grown in Andirin Northeastern Mediterranean region of Turkey. Turk. J. Agric. For., 26: 147-154.
    Direct Link  |  
  23. Bektas, I., C. Guler and H. Kalaycıoglu, 2002. Manufacturing of particleboard from sunflower stalks (Helianthus annuus L.) using urea-formaldehyde resin. J. Sci. Eng., 5: 49-56.
  24. Akgul, M. and C. Guler, 2002. Utilization of forest residues, annual plants, agricultural and fabrication wastes in forest product industry. Harran Univ. GAP IV. Eng. Congress, 2: 1613-1620.
  25. Guler, C. and G. Colakoglu, 2001. The effect of surface roughness of calabrian pine (Pinus brutia Ten.) veneers produced in different conditions on the shear-tensile strength of plywood. J. Sci. Eng., 4: 91-111.
  26. Guler, C. R. Ozen and H. Kalaycioglu, 2001. Some of the technological properties of cotton (Gossypium hirsitum L.) stalks particleboards. J. Sci. Eng., 4: 98-110.