Dr. Shahrum Abdullah
My Social Links

Dr. Shahrum Abdullah

Professor
Department of Mechanical and Materials Engineering, Universitiy Kebangsaan Malaysia, Malaysia

Highest Degree
Ph.D. in Mechanical Engineering from The University of Sheffield, England, UK

Share this Profile

Area of Interest:

Engineering
100%
Fatigue Life Assessment
62%
Engineering Design
90%
Fatigue Data and Signal Analysis
75%
Fracture Mechanics
55%

Research Publications in Numbers

Books
0
Chapters
8
Articles
468
Abstracts
62

Selected Publications

  1. Othman, N.K., M.N. Zulkifli, A. Jalar and S. Abdullah, 2011. Nanoindentation test for the stiffness distribution analysis of bonded Au ball bonds. Adv. Mater. Res., 154-155: 674-677.
    CrossRef  |  
  2. Nopiah, Z.M., S. Abdullah, M.N. Baharin, T.E. Putra, S.N. Sahadan and K.O. Willis, 2011. Comparative study on data editing techniques for fatigue time series signals. Adv. Mater. Res., 146-147: 1681-1684.
    CrossRef  |  
  3. Jalar, A., M.N. Zulkifli and S. Abdullah, 2011. Nanoindentation test for the strength distribution analysis of bonded Au ball bonds. Adv. Mater. Res., 148-149: 1163-1166.
    CrossRef  |  
  4. Abdullah, S., M.N. Zulkifli and A. Jalar, 2011. Nanoindentation approach for evaluation of process parameters effect on the strength of bonded Au ball bonds. Adv. Mater. Res., 148-149: 1129-1132.
    CrossRef  |  
  5. Abdullah, S., M.F.M. Yunoh, A. Jalar and M.F. Abdullah, 2011. Hardness test on an epoxy mold compound of a quad flat no lead package using the depth sensing nanoindentation. Adv. Mater. Res., 146-147: 1000-1003.
    CrossRef  |  
  6. Abdullah, S., M.B. Ali, M.Z. Nuawi, Z.M. Nopiah and A.K. Ariffin, 2011. Evaluating charpy impact signals with different frequencies using power spectrum densities. Adv. Mater. Res., 156-157: 1518-1521.
    CrossRef  |  
  7. Yunoh, M.F.M., S. Abdullah, A. Jalar, M.F. Rosle and S.A. Radzi, 2010. Micromechanical studies of 4N gold wire for fine pitch wirebonding. J. Sci. Technol., 2: 121-134.
    Direct Link  |  
  8. Yunoh, M.F.M., S. Abdullah and A. Jalar, 2010. Mechanical properties of QFN semiconductor package using flexural test. World Applied Sci. J., 9: 40-42.
  9. Wahab, M.Z.A., A. Jalar, S. Abdullah and H. Mamat, 2010. Characterization of 0.5μm BiCMOS gate oxide using time dependent dielectric breakdown test. J. Adv. Mater. Res., 97: 40-44.
    CrossRef  |  Direct Link  |  
  10. Shuid, A.N., S. Mohamad, N. Mohamed, F.M. Fadzilah and S.A. Mokhtar et al., 2010. Effects of calcium supplements on fracture healing in a rat osteoporotic model. J. Orthop. Res., 28: 1651-1656.
    CrossRef  |  PubMed  |  Direct Link  |  
  11. Putra, T.E., S. Abdullah, M.Z. Nuawi and Z.M. Nopiah, 2010. Wavelet coefficient extraction algorithm for extracting fatigue features in variable amplitude fatigue loading. J. Applied Sci., 10: 277-283.
    CrossRef  |  
  12. Nuawi, M.Z., T.I. Mohamad, M.F.H. Hussin, S. Abdullah, R. Zulkifli and M.K. Zakaria, 2010. Preliminary study of Condition-Based Monitoring (CBM) on automotive gearbox using ultrasonic signals. World Applied Sci. J., 9: 118-126.
    Direct Link  |  
  13. Nopiah, Z.M., M.N. Baharin, S. Abdullah, M.I. Khairir and A. Ariffin, 2010. Running damage extraction technique for identifying fatigue damaging events. Wseas Trans. Math., 9: 324-333.
    Direct Link  |  
  14. Nopiah, Z.M., M.I. Khairir, S. Abdullah, M.N. Baharin and A. Ariffin, 2010. Time complexity estimation and optimisation of the genetic algorithm clustering method. Wseas Trans. Math., 9: 334-344.
    Direct Link  |  
  15. Lennie, A., S. Abdullah, Z.M. Nopiah and M.N. Baharin, 2010. Behavioural investigation of fatigue time series using the statistical approach. J. Applied Sci., 10: 1714-1722.
    CrossRef  |  Direct Link  |  
  16. Kornain, Z., A. Jalar, R. Rasid and S. Abdullah, 2010. Comparative study of phenolic- based and amine-based underfill materials in flip chip plastic ball grid array package. J. Electron. Packag., Vol. 132, 10.1115/1.4002741.
    CrossRef  |  
  17. Kornain, Z., A. Jalar, R. Rasid and S. Abdullah, 2010. An optimization of two-steps curing profile to eliminate voids formation in underfill epoxy for Hi-CTE flip chip packaging. J. Adv. Mater. Res., 97: 23-27.
    CrossRef  |  
  18. Abdullah, S., T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin and L. Abdullah, 2010. The morlet wavelet analysis for fatigue feature clustering. Wseas Trans. Math., 9: 345-354.
    Direct Link  |  
  19. Abdullah, S., T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin and L. Abdullah, 2010. Extracting fatigue damage features using STFT and CWT. Wseas Trans. Signal Process., 6: 91-100.
    Direct Link  |  
  20. Abdullah, S., N. Ismail, M.Z. Nuawi, M.Z. Nopiah and A. Ariffin, 2010. Using the hybrid kurtosis-based method to correlate strain and vibration signals. Wseas Trans. Signal Process., 6: 79-90.
    Direct Link  |  
  21. Abdullah, S., M.FM. Yunoh and A. Jalar, 2010. Three-point bending test behaviour of a QFN semiconductor package. Adv. Mater. Res., 97-101: 7-10.
    CrossRef  |  
  22. Abdullah, S., M.F. Abdullah, A.K. Arifin, C.K.E. Nizwan, M.F.M. Yunoh and A. Jalar, 2010. Failure analysis of a semiconductor packaging leadframe using the signal processing approach. Int. J. Mod. Phys. B, 24: 175-182.
    CrossRef  |  
  23. Salleh, S.H., M.Z. Omar, J. Syarif, M.J. Ghazali, S. Abdullah and Z. Sajuri, 2009. Investigation of microstructures and properties of440c martensitic stainless steel. Int. J. Mech. Materials Eng., 4: 21-24.
    Direct Link  |  
  24. Refngah, F.N.A., S. Abdullah, A. Jalar and L.B. Chua, 2009. Fatigue life evaluation of two types of steel leaf springs. Int. J. Mech. Mater. Eng., 4: 34-38.
  25. Rahman, M.M., A.K. Ariffin, S. Abdullah, M.M. Noor, R.A. Bakar and M.A. Maleque, 2009. Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. Am. J. Applied Sci., 6: 715-725.
    Direct Link  |  
  26. Rahman, M.M., A.K. Ariffin, S. Abdullah, M.M. Noor and A.B. Rosli, 2009. Durability assessment of cylinder block for two stroke free piston linear engine using random loading. Am. J. Applied Sci., 6: 726-735.
    Direct Link  |  
  27. Nuawi, M.Z., F. Lamin, A.R. Ismail, S. Abdullah and Z. Wahid, 2009. A novel machining signal filtering technique: Z-notch filter. J. World Acad. Sci. Eng. Technol., 54: 24-29.
    Direct Link  |  
  28. Nopiah, Z.M., M.I. Khairir, S. Abdullah, C.K.E. Nizwan and M.N. Baharin, 2009. Peak-valley segmentation algorithm for kurtosis analysis and classification of fatigue time series data. Eu. J. Sci. Res., 29: 113-125.
  29. Jalar, A., A.R. Daud, I. Abdullah, M.A.A. Hamid, M.F. Rosle and S. Abdullah, 2009. Effect of manufacturing stresses to die attach film performance in quad flatpack no-lead stacked die packages. Am. J. Eng. Applied Sci., 2: 17-24.
    CrossRef  |  Direct Link  |  
  30. Budiman, H., M.Z. Omar, A. Jalar, J. Syarif, M.J. Ghazali and S. Abdullah, 2009. Production of feedstock material for semi-solid materialprocessing by cooling slope casting process. Int. J. Mech. Mater. Eng., 4: 74-78.
    Direct Link  |  
  31. Beden, S.M., S. Abdullah, A.K. Ariffin, M.M. Rahman and N.A. Al-Asady, 2009. Fatigue life assessment of different steel-based shell materials under variable amplitude loadings. Eur. J. Sci. Res., 29: 157-169.
    Direct Link  |  
  32. Beden, S.M., S. Abdullah and A.K. Ariffin, 2009. Towards standardising the fatigue crack simulation studies on metallic materials. ICCES, 10: 41-50.
    Direct Link  |  
  33. Beden, S.M., S. Abdullah and A.K. Ariffin, 2009. Review of fatigue crack propagation models for metallic components. Eur. J. Sci. Res., 28: 364-397.
    Direct Link  |  
  34. Beden, S.M., S. Abdullah and A.K. Ariffin, 2009. A modeling of fatigue crack growth under constant and variable amplitude loading for aluminum alloy. Int. J. Mech. Mater. Eng., 4: 29-33.
  35. Al-Asady, N.A., S. Abdullah, A.K. Ariffin, S.M. Beden and M.M. Rahman, 2009. FEA based durability using strain-life models for different medium carbon steel as fabrication mater. Int. J. Mech. Mater. Eng., 4: 39-44.
    Direct Link  |  
  36. Abdullah, S., S.M. Beden, A.K. Ariffin and N.A. Al-Asady, 2009. Fatigue crack growth modelling of aluminium alloy under constant and variable amplitude loadings. J. Struct. Duribility Health Monitor., 5: 109-131.
  37. Abdullah, S., M.F.M. Yunoh, A. Jalar And H. Kamarudin, 2009. Role of strain rate on the micromechanical characterization properties of 4N gold micro wire: Micro tensile and NanoIndentation. Eu. J. Sci. Res., 28: 33-34.
    Direct Link  |  
  38. Abdullah, S., M.F. Abdullah, A.K. Ariffin and A. Jalar, 2009. Thermal-mechanical analysis of a different leadframe thickness of semiconductor package under the reflow process. Am. J. Applied Sci., 6: 616-625.
    CrossRef  |  Direct Link  |  
  39. Abdullah, S., M.F. Abdullah, A.K. Ariffin and A. Jalar, 2009. Effect of leadframe oxidation on the reliability of a quad flat no-lead package. J. Electronic Packag., 131: 031002-1-031002-7.
    CrossRef  |  
  40. Abdullah, S., M. Loman and N. Jamaluddin, 2009. Signal processing method for evaluating fatigue damage in a piping system. J. Applied Sci., 9: 2381-2389.
    CrossRef  |  Direct Link  |  
  41. Abdullah, S., C.K.E. Nizwan and M.Z. Nuawi, 2009. A study of fatigue data editing using the Short-Time Fourier Transform (STFT). Am. J. Applied Sci., 6: 565-575.
    CrossRef  |  Direct Link  |  
  42. Abdullah, S., A. Fahruddin, J. Syarif and M.Z. Omar, 2009. Modelling of fiber metal laminate (Fml) composite using the residual stiffness and strength model. J. Mech. Materials Eng., 4: 87-91.
    Direct Link  |  
  43. Wahab, D.A., N.F.A. Manan, M.A. Hannan, S. Abdullah and A. Hussain, 2008. Designing for comfort and reliability in an intelligent car seat. Am. J. Applied Sci., 5: 1787-1792.
    CrossRef  |  Direct Link  |  
  44. Talib, S.A., A. Zaharim, J. Ariffin, Y.C. Yang and S. Abdullah, 2008. Route to becoming a member of evaluation panel for the Engineering Accreditation Council (EAC) of Malaysia. Int. J. Educ. Inform. Technol., 1: 49-51.
    Direct Link  |  
  45. Rahman, M.M., A.K. Ariffin, M.J.M. Nor and S. Abdullah, 2008. Fatigue analysis of Spot-welded joint for automotive structures. J. Struct. Durability Health Monit., 4: 173-180.
  46. Rahman, M.M., A.K. Arffin, N. Jamaludin, S. Abdullah and M.M. Noor, 2008. Finite element based fatigue life prediction of a new free piston engine mounting. J. Applied Sci., 8: 1612-1621.
    CrossRef  |  Direct Link  |  
  47. Nuawi, M.Z., S. Abdullah, A.R. Ismail, R. Zulkifli, M.K. Zakaria and M.F.H. Hussin, 2008. A study on ultrasonic signals processing generated from automobile engine block using statistical analysis. WSEAS Trans. Signal Proc., 4: 279-288.
    Direct Link  |  
  48. Nuawi, M.Z., M.J.M. Nor, N. Jamaludin, S. Abdullah, F. Lamin and C.K.E. Nizwan, 2008. Development of integrated kurtosis-based algorithm for z-filter technique. J. Applied Sci., 8: 1541-1547.
    CrossRef  |  Direct Link  |  
  49. Nopiah, Z.M., M.N. Baharin, S. Abdullah, M.I. Khairir and C.K.E. Nizwan, 2008. Abrupt changes detection in fatigue data using the cumulative sum method. Wseas Trans. Math., 7: 708-717.
    Direct Link  |  
  50. Nopiah, Z.M., M.I. Khairir, S. Abdullah and C.K.E. Nizwan, 2008. Peak-valley segmentation algorithm for fatigue time series data. Wseas Tran. Math., 7: 698-707.
    Direct Link  |  
  51. Mohamed, I., A. Zaharim, S. Abdullah and M.S. Yahya, 2008. An evaluation of test statistics for detecting level change in BL(1,1,1,1) models. WSEAS Trans. Math., 7: 67-70.
    Direct Link  |  
  52. Ismail, A., S. Abdullah, A. Zaharim and I. Ahmad, 2008. Modeling lane-changing behavior based on queue length at an urban signalized intersection. Int. J. Math. Models Methods Applied Sci., 1: 294-299.
    Direct Link  |  
  53. Ghazali, M.J., W.M. Rainforth, S. Abdullah, A.K.A. Ihsan and M. Hassan, 2008. Subsurface deformation of worn al-cu and al-mg alloys. Adv. Mater. Res., 33: 483-488.
    CrossRef  |  
  54. Ariffin, A.K., M.R.M. Akramin, S. Huzni, S. Abdullah and M.J. Ghazali, 2008. Probabilistic analysis of cracked structures with uncertainty parameters. Adv. Mater. Res., 33: 223-228.
    CrossRef  |  
  55. Abdullah, S., Z.A. Aziz, I. Ahmad, M.F. Abdullah and M.F. Mod Yunoh, 2008. Gold wire neck strength on different combinations of looping parameters. J. Solid State Sci. Technol., 16: 232-239.
  56. Abdullah, S., Z.A. Aziz, I. Ahmad, M.F. Abdullah and M.F. Mod Yunoh, 2008. Effects of looping formation on wire sweeping problem of a newly developed QFN package. J. Solid State Sci. Technol., 16: 247-254.
  57. Abdullah, S., Z.A. Aziz, I. Ahmad and M.F. Abdullah, 2008. Low looping challenges in the QFN wire bonding process. J. Solid State Sci. Technol., 16: 25-32.
  58. Abdullah, S., Z. Endut, I. Ahmad, A. Jalar and S.M. Yusof, 2008. Dicing laminated wafer for QFN 3D stacked die packaging. J. Adv. Mater. Res., 31: 202-205.
    CrossRef  |  Direct Link  |  
  59. Abdullah, S., S.N. Sahadan, M.Z. Nuawi and Z.M. Nopiah, 2008. Fatigue road signal denoising process using the 4th order of daubechies wavelet transforms. J. Applied Sci., 8: 2496-2509.
    CrossRef  |  Direct Link  |  
  60. Abdullah, S., S.M. Yusof, A. Jalar, M.F. Abdullah, Z.A. Aziz and R. Daud, 2008. Step cut for dicing laminated wafer in a QFN package. J. Solid State Sci. Technol., 16: 198-206.
  61. Abdullah, S., S.M. Beden, A.K. Ariffin and M.M. Rahman, 2008. Fatigue life assessment for metallic structure: A case study of shell structure under variable amplitude loading. J. Applied Sci., 8: 1622-1631.
    CrossRef  |  Direct Link  |  
  62. Abdullah, S., N.A. Al-Asady, A.K. Ariffin and M.M. Rahman, 2008. A review on finite element analysis approaches in durability assessment of automotive components. J. Applied Sci., 8: 2192-2201.
    CrossRef  |  Direct Link  |  
  63. Abdullah, S., M.F. Abdullah, A.K. Ariffin, S. Yusof, R. Daud and Z.A. Aziz, 2008. Copper leadframe analysis using thermomechanical approach. J. Solid State Sci. Technol., 16: 164-172.
  64. Abdullah, S., M.F. Abdullah, A.K. Ariffin, M.N. Baharin, Z.A. Aziz and M.F. Mod Yunoh, 2008. Effect of package delamination under 3-points bending test: A case study using cyclic loading. J. Solid State Sci. Technol., 16: 72-82.
  65. Abdullah, S., M.F. Abdullah, A.K. Ariffin, M.N. Baharin, Z.A. Aziz and M.F. Mod Yunoh, 2008. Comparison in between good and oxidized leadframe: A case study in package delamination analysis. J. Solid State Sci. Technol., 16: 223-231.
  66. Abdullah, S., M.D. Ibrahim, Z. Mohd Nopiah and A. Zaharim, 2008. Analysis of a variable amplitude fatigue loading based on the quality statistical approach. J. Applied Sci., 8: 1590-1593.
    CrossRef  |  Direct Link  |  
  67. Abdullah, S., M.D. Ibrahim, A. Zaharim and Z.M. Nopiah, 2008. Statistical analysis of a nanostationary fatigue data using the ARIMA approach. WSEAS Trans. Math., 7: 59-66.
    Direct Link  |  
  68. Abdullah, S., M. Faizal Abdullah and A. Kamal Ariffin, 2008. The effect of leadframe oxidation of a quad flat no-lead semiconductor package under cyclic loading. J. Applied Sci., 8: 1676-1683.
    CrossRef  |  Direct Link  |  
  69. Zaharim, A., I. Ahmad, M.D. Ibrahim and S. Abdullah, 2007. Application of moving average approaches in analysing fatigue road loading. Res. J. Applied Sci., 2: 600-605.
    CrossRef  |  Direct Link  |  
  70. Wahab, D.A. and S. Abdullah, 2007. Enhancement of capabilities in design synthesis through the concurrent application of design methodologies. J. Eng. Applied Sciences, 2: 248-255.
    CrossRef  |  Direct Link  |  
  71. Rahman, M.M., A.K. Ariffin, S. Abdullah and N. Jamaludin, 2007. Finite element based durability assessment of a free piston linear engine component. Struct. Durability Health Monit., 3: 1-14.
    CrossRef  |  
  72. Rahman, M.M., A.K. Ariffin and S. Abdullah, 2007. Finite element based vibration fatigue analysis of a new Two-stroke linear generator engine component. Int. J. Mech. Mater. Eng., 2: 63-74.
  73. Nuawi, M.Z. and S. Abdullah, 2007. Recognising fatigue damaging features in variable amplitude loadings using the s-transform approach. J. Eng. Applied Sciences, 2: 753-759.
    CrossRef  |  Direct Link  |  
  74. Nuawi, M. Z., F. Lamin, M.J.M. Nor, N. Jamaluddin, S. Abdullah and C.K.E. Nizwan, 2007. Integration of I-kaz coefficient and taylor tool life curve for tool wear progression monitoring in machining process. Int. J. Mech., 4: 44-50.
  75. Ismail, A., A. Zaharim, S. Abdullah, Z.M. Nopiah and F.L.M. Isa, 2007. A longitudinal study of first year engineering students' performance at the Universiti Kebangsaan Malaysia: Before and after the implementation of the OBE approach. Int. J. Edu. Inf. Technol., 1: 52-55.
    Direct Link  |  
  76. Abdullah, S., M.Z. Nuawi and A. Zaharim, 2007. Application of a computational data editing algorithm to summarise fatigue road loadings. WSEAS Tran. Comput. Res., 2: 109-114.
  77. Abdullah, S., 2007. The wavelet transform for fatigue history editing: Is it applicable for automotive applications. J. Eng. Applied Sci., 2: 342-349.
    CrossRef  |  Direct Link  |  
  78. Zaharim, A., I. Mohamed, I. Ahmad, S. Abdullah and M.Z. Omar, 2006. Performances test statistics for single outlier detection in bilinear (1,1,1,1) models. WSEAS Trans. Math., 5: 1359-1364.
  79. Omar, M.Z., N.A. Nik Mohamed, A. Zaharim, S. Abdullah, S. M. Haris, A. Hassan and H. Basri, 2006. A study of employers' satisfaction of engineering graduates in Malaysia. WSEAS Trans. Adv. Eng. Edu., 3: 506-510.
  80. Abdullah, S., J.C. Choi, J.A. Giacomin and J.R. Yates, 2006. Bump extraction algorithm for variable amplitude fatigue loading. Int. J. Fatigue, 28: 675-691.
    CrossRef  |  Direct Link  |  
  81. Abdullah, S. and J.C. Choi, 2006. Using a fatigue data editing approach for analysing cycle sequence effects in variable amplitude road loadings. J. Inst. Eng. Malaysia, 67: 47-54.
  82. Abdullah, S. and A. Zaharim, 2006. Using the orthogonal wavelet transform to identify fatigue features in variable amplitude fatigue loadings. WSEAS Trans. Signal Proc., 2: 1416-1420.
  83. Abdullah, S., J.R. Yates and J.A. Giacomin, 2005. Fatigue data editing algorithm for automotive applications. J. Kejuruteraan UKM, 17: 71-84.
  84. Abdullah, S., J.A. Giacomin and J.R. Yates, 2004. A mission synthesis algorithm for fatigue damage analysis. J. Automobile Eng., 218: 243-258.
    CrossRef  |  Direct Link  |  
  85. Abdullah, S., 2001. Pengembangan reka bentuk konsep menerusi kaedah penganalisaan fungsi (development of the conceptual design using function analysis approach). J. Kejuruteraan UKM, 13: 63-72.
  86. Abdullah, S., M.Z. Nuawi and M.Z. Omar, 2000. Design methodology development of a Tailor-made aortic stent. J. Inst. Eng., 61: 23-31.