1. Vieira, S.M., A. Silva, J.M.C. Sousa, J. de Brito and P.L. Gaspar, 2015. Modelling the service life of rendered facades using fuzzy systems. Autom. Constr., 51: 1-7.
   CrossRef  |  Direct Link  |  
2. Tuna, J., J. Feiteira, I. Flores-Colen, M. Pereira and J. de Brito, 2015. In Situ characterization of damaging soluble salts in wall construction materials. J. Perform. Constr. Facilit., Vol. 29. 10.1061/(ASCE)CF.1943-5509.0000616.
   CrossRef  |  Direct Link  |  
3. Soares, A., M. Julio, I. Flores-Colen, L. Ilarco, J. de Brito and J. Martinho, 2015. Water-resistance of mortars with lightweight aggregates. Key Eng. Mater., 634: 46-53.
4. Soares, A., I. Flores-Colen and J. de Brito, 2015. Influence of slenderness on the compressive strength evaluation of cores of renders. Mater. Struct., 48: 1449-1460.
   CrossRef  |  Direct Link  |  
5. Silvestre, J.D., S. Lasvaux, J. Hodkova, J. de Brito and M.D. Pinheiro, 2015. NativeLCA-a systematic approach for the selection of environmental datasets as generic data: Application to construction products in a national context. Int. J. Life Cycle Assess., 20: 731-750.
   CrossRef  |  Direct Link  |  
6. Silvestre, J.D., A. Silva and J. de Brito, 2015. Uncertainty modelling of service life and environmental performance to reduce risk in building design decisions. J. Civil Eng. Manage., 21: 308-322.
   CrossRef  |  Direct Link  |  
7. Silvestre, J., N. Silvestre and J. de Brito, 2015. Review on concrete nanotechnology. Eur. J. Environ. Civil Eng. 10.1080/19648189.2015.1042070.
   CrossRef  |  Direct Link  |  
8. Silvestre, J., N. Silvestre and J. de Brito, 2015. Polymer nanocomposites for structural applications: Recent trends and new perspectives. Mech. Adv. Mater. Struct. 10.1080/15376494.2015.1068406.
   CrossRef  |  Direct Link  |  
9. Silva, A., P.L. Gaspar, J. de Brito and L.C. Neves, 2015. Probabilistic analysis of degradation of facade claddings using Markov chain models. Mater. Struct., 10.1617/s11527-015-0692-5.
   CrossRef  |  Direct Link  |  
10. Silva, A., L.C. Neves, P.L. Gaspar and J. de Brito, 2015. Probabilistic transition of condition: render facades. Build. Res. Inf., 10.1080/09613218.2015.1023645.
    CrossRef  |  Direct Link  |  
11. Silva, A., J. de Brito and P. Gaspar, 2015. Stochastic approach to the factor method: durability of rendered facades. J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0001409.
    CrossRef  |  Direct Link  |  
12. Serpa, D., J. de Brito and J. Pontes, 2015. Concrete made with recycled glass aggregates: mechanical performance. ACI Mater. J., 112: 29-38.
    CrossRef  |  Direct Link  |  
13. Sa, G., J. Sa, J. de Brito and B. Amaro, 2015. Statistical survey on inspection, diagnosis and repair of wall renderings. J. Civil Eng. Manage., 21: 623-636.
    CrossRef  |  Direct Link  |  
14. Rodrigues, R., J. de Brito and M. Sardinha, 2015. Mechanical properties of structural concrete containing very fine aggregates from marble cutting sludge. Constr. Build. Mater., 77: 349-356.
    CrossRef  |  Direct Link  |  
15. Reis, N., J. de Brito, J.R. Correia and M.R.T. Arruda, 2015. Punching behaviour of concrete slabs incorporating coarse recycled concrete aggregates. Eng. Struct., 100: 238-248.
    CrossRef  |  Direct Link  |  
16. Rao, S., P. Rao and J. de Brito, 2015. Experimental study of the mechanical properties and durability of self-compacting mortars with nano materials (SiO₂ and TiO₂). Constr. Build. Mater., 96: 508-517.
    CrossRef  |  Direct Link  |  
17. Pires, R., J. de Brito and B. Amaro, 2015. Statistical survey of the inspection, diagnosis and repair of painted rendered facades. Struct. Infrastructure Eng., 11: 605-618.
    CrossRef  |  Direct Link  |  
18. Pires, R., J. de Brito and B. Amaro, 2015. Inspection, diagnosis, and rehabilitation system of painted rendered facades. J. Perform. Constr. Facil. 10.1061/(ASCE)CF.1943-5509.0000534.
    CrossRef  |  Direct Link  |  
19. Pereira, C., J. de Brito and J. Correia, 2015. Building characterization and degradation condition of secondary industrial schools. J. Perform. Constr. Facil. 10.1061/(ASCE)CF.1943-5509.0000622.
    CrossRef  |  Direct Link  |  
20. Pacheco, J., J. de Brito, J. Ferreira and D. Soares, 2015. Dynamic characterization of full-scale structures made with recycled coarse aggregates. J. Cleaner Prod., 10.1016/j.jclepro.2015.08.045.
    CrossRef  |  Direct Link  |  
21. Oliveira, R., J. de Brito and R. Veiga, 2015. Reduction of the cement content in rendering mortars with fine glass aggregates. J. Cleaner Prod., 95: 75-88.
    CrossRef  |  Direct Link  |  
22. Neves, R., F. Branco and J. de Brito 2015. Study on the influence of surface and geometric factors on the results of a non-destructive onsite method to assess air permeability. Exp. Tech., 10.1111/ext.12169.
    CrossRef  |  Direct Link  |  
23. Neves, R., B.S. da Fonseca, F. Branco, J. de Brito, A. Castela and M.F. Montemor, 2015. Assessing concrete carbonation resistance through air permeability measurements. Constr. Build. Mater., 82: 304-309.
    CrossRef  |  Direct Link  |  
24. Mateus, L., M.R. Veiga and J. de Brito, 2015. In Situ characterization of rammed earth wall renders. Int. J. Archit. Heritage:.Conserv. Anal. Restor., 9: 430-442.
    CrossRef  |  Direct Link  |  
25. Ledesma, E.F., J.R. Jimenez, J. Ayuso, J.M. Fernandez and J. de Brito, 2015. Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production - Part-I: ceramic masonry waste. J. Cleaner Prod., 87: 692-706.
    CrossRef  |  Direct Link  |  
26. Garcez, N., N. Lopes, J. de Brito, G. Sa and J. Silvestre, 2015. Influence of design on the service life of pitched roofs' cladding. J. Perform. Constr. Facil., Vol.29. 10.1061/(ASCE)CF.1943-5509.0000461.
    CrossRef  |  Direct Link  |  
27. Galbusera, M.M., J. de Brito and A. Silva 2015. Application of the factor method to the prediction of the service life of ceramic external wall cladding. J. Perform. Constr. Facil., Vol.29. 10.1061/(ASCE)CF.1943-5509.0000588.
    CrossRef  |  Direct Link  |  
28. Freire, M.T., A.S. Silva, R. Veiga and J. de Brito, 2015. The history of Portuguese interior plaster coatings: A mineralogical survey using XRD. Archaeometry, 57: 147-165.
    CrossRef  |  Direct Link  |  
29. Freire, L., J. de Brito and J.R. Correia, 2015. Inspection survey of support bearings in road bridges. J. Perform. Constr. Facil., Vol.29. 10.1061/(ASCE)CF.1943-5509.0000569.
    CrossRef  |  Direct Link  |  
30. Ferreira, J., M.D. Pinheiro and J. de Brito, 2015. Economic and environmental savings of structural buildings refurbishment with demolition and reconstruction - A portuguese benchmarking. J. Build. Eng., 3: 114-126.
    CrossRef  |  Direct Link  |  
31. Farinha, C., J. de Brito, R. Veiga and J. Lucas, 2015. Reduction of cement content in renderings with fine sanitary ware aggregates. Mater. Struct., 10.1617/s11527-015-0598-2.
    CrossRef  |  Direct Link  |  
32. Farinha, C., J. de Brito and R. Veiga, 2015. Incorporation of fine sanitary ware aggregates in coating mortars. Constr. Build. Mater., 83: 194-206.
    CrossRef  |  Direct Link  |  
33. Evangelista, L., M. Guedes, J. de Brito, A.C. Ferro and M.F. Pereira, 2015. Physical, chemical and mineralogical properties of fine recycled aggregates made from concrete waste. Constr. Build. Mater., 86: 178-188.
    CrossRef  |  Direct Link  |  
34. Edis, E., I. Flores-Colen and J. de Brito, 2015. Time-dependent passive building thermography for detecting delamination of adhered ceramic cladding. J. Nondestruct. Eval., Vol. 34. 10.1007/s10921-015-0297-5.
    CrossRef  |  Direct Link  |  
35. Edis, E., I. Flores-Colen and J. de Brito, 2015. Quasi-quantitative infrared thermographic detection of moisture variation in facades with adhered ceramic cladding using principal component analysis. Build. Environ., 94: 97-108.
    CrossRef  |  Direct Link  |  
36. Edis, E., I. Flores-Colen and J. de Brito, 2015. Building thermography: Detection of delamination of adhered ceramic claddings using the passive approach. J. Nondestruct. Eval., Vol. 34. 10.1007/s10921-014-0268-2.
    CrossRef  |  Direct Link  |  
37. Duarte, A.P.C., B.A. Silva, N. Silvestre, J. de Brito and E. Julio, 2015. Mechanical characterization of rubberized concrete using an image-processing/XFEM coupled procedure. Compos. Part B: Eng., 78: 214-226.
    CrossRef  |  Direct Link  |  
38. De Silva, R.V., J.D. de Brito, R. Neves and R. Dhir, 2015. Prediction of chloride ion penetration of recycled aggregate concrete. Mater. Res., 18: 427-440.
    CrossRef  |  Direct Link  |  
39. De Silva, R.V., J. de Brito and R.K. Dhir, 2015. Tensile strength behaviour of recycled aggregate concrete. Constr. Build. Mater., 83: 108-118.
    CrossRef  |  Direct Link  |  
40. De Silva, R.V., J. de Brito and R.K. Dhir, 2015. Comparative analysis of existing prediction models on the creep behaviour of recycled aggregate concrete. Eng. Struct., 100: 31-42.
    CrossRef  |  Direct Link  |  
41. De Silva, R V., J. de Brito and R.K. Dhir, 2015. Prediction of the shrinkage behavior of recycled aggregate concrete: A review. Constr. Build. Mater., 77: 327-339.
    CrossRef  |  Direct Link  |  
42. De Brito, J. and R. Silva, 2015. Use of waste materials in the production of concrete. Key Eng. Mater., 634: 85-96.
    CrossRef  |  Direct Link  |  
43. Da Silva, P.R. and J. de Brito, 2015. Experimental study of the porosity and microstructure of Self-Compacting Concrete (SCC) with binary and ternary mixes of fly ash and limestone filler. Constr. Build. Mater., 86: 101-112.
    CrossRef  |  Direct Link  |  
44. Chai, C., J. de Brito, P.L. Gaspar and A. Silva, 2015. Statistical modelling of the service life prediction of painted surfaces. Int. J. Strat. Proper. Manage., 19: 173-185.
    CrossRef  |  Direct Link  |  
45. Cartuxo, F., J. de Brito, L. Evangelista, J.R. Jimenez and E.F. Ledesma, 2015. Rheological behaviour of concrete made with fine recycled concrete aggregates-influence of the superplasticizer. Constr. Build. Mater., 89: 36-47.
    CrossRef  |  Direct Link  |  
46. Carro-Lopez, D., B. Gonzalez-Fonteboa, J. de Brito, F. Martinez-Abella, I. Gonzalez-Taboada and P. Silva, 2015. Study of the rheology of self-compacting concrete with fine recycled concrete aggregates. Constr. Build. Mater., 96: 491-501.
    CrossRef  |  Direct Link  |  
47. Bravo, M., J. de Brito, J. Pontes and L. Evangelista, 2015. Performance of concrete made with recycled aggregates from Portuguese CDW recycling plants. Key Eng. Mater., 634: 193-205.
    CrossRef  |  Direct Link  |  
48. Bravo, M., J. de Brito, J. Pontes and L. Evangelista, 2015. Mechanical performance of concrete made with aggregates from construction and demolition waste recycling plants. J. Cleaner Prod., 99: 59-74.
    CrossRef  |  Direct Link  |  
49. Bogas, J.A., J. de Brito and J.M. Figueiredo, 2015. Mechanical characterization of concrete produced with recycled lightweight expanded clay aggregate concrete. J. Cleaner Prod., 89: 187-195.
    CrossRef  |  Direct Link  |  
50. Zuniga, D., J. de Brito and H. Rua, 2014. Designing a roman fort for historical recreation and reenactment purposes. J. Professional Issues Eng. Educ. Pract., Vol. 140. 10.1061/(ASCE)EI.1943-5541.0000202.
    CrossRef  |  Direct Link  |  
51. Ximenes, S., J. de Brito, P.L. Gaspar and A. Silva, 2014. Modelling the degradation and service life of ETICS in external walls. Mater. Struct., 48: 2235-2249.
    CrossRef  |  Direct Link  |  
52. Soares, D., J. de Brito, J. Ferreira and J. Pacheco, 2014. Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance. Construct. Build. Mater., 71: 263-272.
    Direct Link  |  
53. Soares, A., I. Flores-Colen and J. de Brito, 2014. Use of non-standard specimens to study the compressive strength of multi-coat renders. J. Testing Eval., 43: 1-11.
    CrossRef  |  Direct Link  |  
54. Silva, R.V., J. de Brito and R.K. Dhir, 2014. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production. Constr. Build. Mater., 65: 201-217.
    CrossRef  |  
55. Silva, A., R. Neves and J. de Brito, 2014. Statistical modelling of carbonation in reinforced concrete. Cement Concrete Comp., 50: 73-81.
    CrossRef  |  Direct Link  |  
56. Silva, A., P.L. Gaspar and J. de Brito, 2014. Durability of current renderings: A probabilistic analysis. Autom. Constr., 44: 92-102.
    CrossRef  |  Direct Link  |  
57. Pereira, A., F. Palha, J. Brito and J. Dinis, 2014. Diagnosis and repair of gypsum plaster coatings: Statistical characterization and lessons learned from a field survey. J. Civil Eng. Manage., 20: 485-496.
    CrossRef  |  Direct Link  |  
58. Pedro, D., J. de Brito and L. Evangelista, 2014. Performance of concrete made with aggregates recycled from precasting industry waste: influence of the crushing process. Mater. Struct., 10.1617/s11527-014-0456-7.
    CrossRef  |  Direct Link  |  
59. Pedro, D., J. de Brito and L. Evangelista, 2014. Influence of the Crushing Process of Recycled Aggregates on Concrete Properties. In: Key Engineering Materials, Aguiar, J., A. Camoes, R. Fangueiro, R. Eires, S. Cunha and M. Kheradmand (Eds.)., Trans Tech Publications Ltd., Switzerland, pp: 151-162.
60. Paulo, P.V., F. Branco and J. de Brito, 2014. Buildings Life: A building management system. Struct. Infrastruct. Eng.: Maintenance, Manage. Life-Cycle Design Performance, 10: 388-397.
    CrossRef  |  Direct Link  |  
61. Paulo, P., J. de Brito and M.R. Veiga, 2014. Physico-mechanical and performance characterization of mortars incorporating fine glass waste aggregate. Cem. Concr. Compos., 50: 47-59.
    CrossRef  |  Direct Link  |  
62. Nuno, P., M.D. Pinheiro, J.D. Silvestre and J. Brito, 2014. Comparative environmental life cycle assessment of thermal insulation materials of buildings. Energy Build., 82: 466-481.
    CrossRef  |  Direct Link  |  
63. Neno, C., J.D. Brito and R. Veiga, 2014. Using fine recycled concrete aggregate for mortar production. Mater. Res., 17: 168-177.
    Direct Link  |  
64. Nabajyoti S and J.Brito 2014. o Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate. Construct.Building Mater., 52: 236-244.
    CrossRef  |  Direct Link  |  
65. Martins, D., J.R. Correia and J. de Brito, 2014. The effect of high temperature on the residual mechanical performance of concrete made with recycled ceramic coarse aggregates. Fire Mater., 10.1002/fam.2287.
    CrossRef  |  Direct Link  |  
66. Marques, B., J. de Brito and J.R. Correia, 2014. Constructive characteristics and degradation condition of Liceu secondary schools in portugal. Int. J. Archit. Heritage:.Conserv. Anal. Restor., 10.1080/15583058.2013.865814.
    CrossRef  |  Direct Link  |  
67. Ma, L., Y. Wang, W. Liu and Z. Liu, 2014. Overexpression of an alfalfa GDP-mannose 3, 5-epimerase gene enhances acid, drought and salt tolerance in transgenic Arabidopsis by increasing ascorbate accumulation. Biotechnol. Lett., 36: 2331-2341.
    CrossRef  |  PubMed  |  Direct Link  |  
68. Jorge, C., P. V. Paul, F. A. Branco and and J. de Brito, 2014. Modeling evolution of stains caused by collection of dirt in old building facades. J. Perform. Constr. Facil., 28: 264-271.
    CrossRef  |  Direct Link  |  
69. Henriques, D., J. de Brito, S. Duarte and L. Nunes, 2014. Consolidating preservative-treated wood: Combined mechanical performance of boron and polymeric products in wood degraded by Coniophora puteana. J. Cult. Heritage, 15: 10-17.
    CrossRef  |  Direct Link  |  
70. Guerra, M., F. Ceia, J. de Brito and E. Julio, 2014. Anchorage of steel rebars to recycled aggregates concrete. Constr. Build. Mater., 72: 113-123.
    CrossRef  |  Direct Link  |  
71. Goncalves, A., J. de Brito and B. Amaro, 2014. Systematic approach to inspect, diagnose and repair masonry walls J. Perform. Constr. Facil., 10.1061/(ASCE)CF.1943-5509.0000650.
    CrossRef  |  Direct Link  |  
72. Goncalo, S., J. Sa, J. Brito and B. Amaro 2014. Inspection and diagnosis system for rendered walls. Transa. A: Civil Eng., 12: 181-192.
    Direct Link  |  
73. Gameiro, F., J. de Brito and D.C. Silva, 2014. Durability performance of structural concrete containing fine aggregates from waste generated by marble quarrying industry. Eng. Struct., 59: 654-662.
    CrossRef  |  Direct Link  |  
74. Galbusera, M.M., J. de Brito and A. Silva, 2014. The importance of the quality of sampling in service life prediction. Construct. Build. Mater., 66: 19-29.
    Direct Link  |  
75. Filipa, E., J. Brito, P.L. Gaspar and A. Silva, 2014. Application of the factor method to the estimation of the service life of natural stone cladding. Constr. Build. Mater., 66: 484-493.
    CrossRef  |  Direct Link  |  
76. Ferreira, J., M.D. Pinheiro and J. de Brito, 2014. Portuguese sustainable construction assessment tools benchmarked with BREEAM and LEED: An energy analysis. Energy Build., 69: 451-463.
    CrossRef  |  Direct Link  |  
77. Evangelistaa L., J. de Brito, 2014. Concrete with fine recycled aggregates: a review. European J. Environ. Civil Eng., 18: 129-172.
    CrossRef  |  Direct Link  |  
78. Ecem E., I.F. Colen and J. de Brito, 2014. Passive thermographic detection of moisture problems in facades with adhered ceramic cladding. Constr. Build. Mater., 51: 187-197.
    CrossRef  |  Direct Link  |  
79. Dias, J.L., A. Silva, C. Chai, P.L. Gaspar and J. de Brito, 2014. Neural networks applied to service life prediction of exterior painted surfaces. Build. Res. Inform., 42: 371-380.
    CrossRef  |  Direct Link  |  
80. De Silva, R.V., J. de Brito and R.K. Dhir, 2014. The influence of the use of recycled aggregates on the compressive strength of concrete: A review. Eur. J. Environ. Civil Eng., 19: 825-849.
    CrossRef  |  Direct Link  |  
81. Da Silva, A.M., J. de Brito and R. Veiga, 2014. Incorporation of fine plastic aggregates in rendering mortars. Constr. Build. Mater., 71: 226-236.
    CrossRef  |  Direct Link  |  
82. Cruz, C.O. and J. de Brito, 2014. Role of public administration in fostering urban housing rehabilitation. J. Urban Plann. Dev., (In Press). 10.1061/(ASCE)UP.1943-5444.0000228.
    CrossRef  |  Direct Link  |  
83. Correia, J.R., J.S. Lima and J. de Brito, 2014. Post-fire mechanical performance of concrete made with selected plastic waste aggregates. Cem. Concr. Compos., 53: 187-199.
    CrossRef  |  Direct Link  |  
84. Braga, M., J. de Brito and R. Veiga, 2014. Reduction of the cement content in mortars made with fine concrete aggregates. Mater. Struct., 47: 171-182.
    CrossRef  |  Direct Link  |  
85. Andre, A., J. de Brito, A. Rosa and D. Pedro, 2014. Durability performance of concrete incorporating coarse aggregates from marble industry waste. J. Cleaner Prod., 65: 389-396.
    CrossRef  |  Direct Link  |  
86. Amaro, B., D. Saraiva, J. de Brito and I. Flores-Colen, 2014. Statistical survey of the pathology, diagnosis and rehabilitation of ETICS in walls. J. Civil Eng. Manage., 20: 511-526.
    Direct Link  |  
87. Alves, A.V., T.F. Vieira, J. de Brito and J.R. Correia, 2014. Mechanical properties of structural concrete with fine recycled ceramic aggregates. Constr. Build. Mater., 64: 103-113.
    CrossRef  |  Direct Link  |  
88. Silvestre, J. de Brito and M.D. Pinheiro, 2014. Environmental impacts and benefits of the end-of-life of building materials-calculation rules, results and contribution to a cradle to cradle life cycle. J.Cleaner Prod., 66: 37-45.
    CrossRef  |  Direct Link  |  
89. Freire.L.M.R.,J.D. Brito and J. R. Correia 2014. Management system for road bridge structural bearings. Struct.Infrastruct. Eng. Maintenance, Manag.Life-Cycle Design Perfor., 10: 1068-1086.
    CrossRef  |  Direct Link  |  
90. Zuniga, D., J. de Brito and H. Rua, 2013. Walls and defences of a Roman fort to be built for historical re-creation. Int. J. Arch. Heritage. 10.1080/15583058.2013.798715.
    CrossRef  |  Direct Link  |  
91. Silvestre, J.D., J. de Brito and M.D. Pinheiro, 2013. Life-cycle impact cradle to cradle of building assemblies. Proc. ICE-Eng. Sustainability, 167: 53-63.
    CrossRef  |  Direct Link  |  
92. Silvestre, J.D., J. de Brito and M.D. Pinheiro, 2013. From the new European Standards to an environmental, energy and economic assessment of building assemblies from cradle-to-cradle (3E-C2C). Energy Buildings, 64: 199-208.
    CrossRef  |  
93. Silva, R.V., J. De Brito and N. Saikia, 2013. Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates. Cement Concrete Composites, 35: 23-31.
    CrossRef  |  
94. Silva, D., F. Gameiro and J. de Brito, 2013. Mechanical properties of structural concrete containing fine aggregates from waste generated by the marble quarrying industry. J. Mater. Civil Eng., Vol. 26. 10.1061/(ASCE)MT.1943-5533.0000948.
    CrossRef  |  Direct Link  |  
95. Silva, A., P.L. Gaspar and J. de Brito, 2013. Probabilistic analysis of the degradation evolution of stone wall cladding directly adhered to the substrate. J. Mater. Civ. Eng., 25: 227-235.
    CrossRef  |  
96. Silva, A., J.L. Dias, P.L. Gaspar and J. de Brito, 2013. Statistical models applied to service life prediction of rendered facades. Autom. Constr., 30: 151-160.
    CrossRef  |  Direct Link  |  
97. Serpa, D., A.S. Silva, D. Soares, M.B. Santos and J. de Brito, 2013. Behaviour of glass in cement-based materials: its role on ASR. Mater. Sci. Forum, 730: 415-420.
    Direct Link  |  
98. Serpa, D., A.S. Silva, A.S. de Brito, J. Pontes and D. Soares, 2013. ASR of mortars containing glass. Construct. Build. Mater., 47: 489-495.
    Direct Link  |  
99. Rodrigues, F., M.T. Carvalho, L. Evangelista and J. de Brito, 2013. Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants. J. Cleaner Prod., 52: 438-445.
    CrossRef  |  Direct Link  |  
100. Pedro, D., J. de Brito and R. Veiga, 2013. Mortars made with fine granulate from shredded tires. J. Mater. Civil Eng., 25: 519-529.
     CrossRef  |  Direct Link  |  
101. Oliveira, R., J. de Brito and R. Veiga, 2013. Incorporation of fine glass aggregates in renderings. Construction Build. Mater., 44: 329-341.
     CrossRef  |  
102. Neves, R., F. Branco and J. De Brito, 2013. Field assessment of the relationship between natural and accelerated concrete carbonation resistance. Cement Concrete Composites, 41: 9-15.
     CrossRef  |  
103. Matias, D., J. de Brito, A. Rosa and D. Pedro, 2013. Mechanical properties of concrete produced with recycled coarse aggregates-influence of the use of superplasticizers. Construct. Build. Mater., 44: 101-109.
     CrossRef  |  Direct Link  |  
104. Matias, D., J. de Brito, A. Rosa and D. Pedro, 2013. Durability of concrete with recycled coarse aggregates: Influence of superplasticizers. J. Mater. Civ. Eng. 10.1061/(ASCE)MT.1943-5533.0000961.
     CrossRef  |  Direct Link  |  
105. Marques, A.M., J.R. Correia and J. de Brito, 2013. Post-fire residual mechanical properties of concrete made with recycled rubber aggregate. Fire Saf. J. 58: 49-57.
     CrossRef  |  Direct Link  |  
106. Margalha, M.G., A.S. Silva, M. do Rosorio Veiga, J. de Brito, R.J. Ball and G.C. Allen, 2013. Microstructural changes of lime putty during aging. J. Mater. Civil Eng., 25: 1524-1532.
     CrossRef  |  Direct Link  |  
107. Malia, M., J. De Brito, M.D. Pinheiro and M. Bravo, 2013. Construction and demolition waste indicators. Waste Manage. Res., 31: 241-255.
     CrossRef  |  Direct Link  |  
108. Jimenez, J.R., J. Ayuso, M. Lopez, J.M. Fernandez and J. de Brito, 2013. Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing. Constr. Build. Mater., 40: 679-690.
     CrossRef  |  
109. Henriques, D.F., L. Nunes and J. de Brito, 2013. Mechanical evaluation of timber conservation processes by bending tests. Adv. Mater. Res., 778: 612-619.
     CrossRef  |  Direct Link  |  
110. Guedes, M., L. Evangelista, J. de Brito and A.C. Ferro, 2013. Microstructural characterization of concrete prepared with recycled aggregates. Microscopy Microanal., 19: 1222-1230.
     CrossRef  |  Direct Link  |  
111. Ferreira, J., M.D. Pinheiro and J. de Brito, 2013. Refurbishment decision support tools: A review from a Portuguese user's perspective. Constr. Build. Mater., 49: 425-447.
     CrossRef  |  
112. Ferreira, J., M.D. Pinheiro and J. de Brito, 2013. Refurbishment decision support tools review-energy and life cycle as key aspects to sustainable. Energy Policy, 64: 1453-1460.
     CrossRef  |  Direct Link  |  
113. Feiteira, J., J.G. Lopes and J. de Brito, 2013. Mechanical performance of liquid-applied roof waterproofing systems. J. Performance Constructed Facilities, 27: 244-251.
     CrossRef  |  Direct Link  |  
114. De Castro, S. and J. de Brito, 2013. Evaluation of the durability of concrete made with crushed glass aggregates. J. Cleaner Prod., 41: 7-14.
     CrossRef  |  
115. De Brito, J. and N. Saikia, 2013. Methodologies for Estimating Properties of Concrete Containing Recycled Aggregates: Analyses of Experimental Research. In: Recycled Aggregate in Concrete, De Brito, J. and N. Saikia (Eds.)., Springer, New York, ISBN: 978-144714539-4, pp: 339-378.
116. De Brito, J. and N. Saikia, 2013. Chapter 7: Concrete with Recycled Aggregates in International Codes. In: Recycled Aggregate in Concrete, De Brito, J. and N. Saikia (Eds.)., Springer, New York, ISBN: 978-144714539-4, pp: 379-429.
117. Coelho, A. and J. de Brito, 2013. Environmental analysis of a construction and demolition waste recycling plant in portugal-part I: Energy consumption and CO₂ emissions. Waste Manage., 33: 1258-1267.
     CrossRef  |  Direct Link  |  
118. Coelho, A. and J. de Brito, 2013. Economic viability analysis of a construction and demolition waste recycling plant in portugal-part II: economic sensitivity analysis. J. Cleaner Prod., 39: 329-337.
     CrossRef  |  Direct Link  |  
119. Coelho, A. and J. de Brito, 2013. Economic viability analysis of a construction and demolition waste recycling plant in Portugal-part I: location, materials, technology and economic analysis. J. Cleaner Prod., 39: 338-352.
     CrossRef  |  Direct Link  |  
120. Bogas, J.A., J. de Brito and J. Cabaco, 2013. Long-term behaviour of concrete produced with recycled lightweight expanded clay aggregate concrete. Constr. Buildi. Mater., 167: 53-63.
     CrossRef  |  Direct Link  |  
121. Barbudo, A., J. de Brito, L. Evangelista, M. Bravo and F. Agrela, 2013. Influence of water-reducing admixtures on the mechanical performance of recycled concrete. J. Cleaner Prod., 59: 93-98.
     CrossRef  |  
122. Amaro, B., D. Saraiva, J. de Brito and I. Flores-Colen, 2013. Inspection and diagnosis system of ETICS on walls. Construct. Build. Mater., 47: 1257-1267.
     CrossRef  |  Direct Link  |  
123. Valadares, F., M. Bravo and J. de Brito, 2012. Concrete with used tire rubber aggregates: Mechanical performance. ACI Mater. J., 109: 283-292.
     CrossRef  |  Direct Link  |  
124. Silva, A., J. de Brito and P.L. Gaspar, 2012. Application of the factor method to maintenance decision support for stone cladding. Automat. Construct., 22: 165-174.
     Direct Link  |  
125. Saikia, N. and J. de Brito, 2012. Use of plastic waste as aggregate in cement mortar and concrete preparation: A review. Constr. Build. Mater., 34: 385-401.
     CrossRef  |  Direct Link  |  
126. Pereira, P., L. Evangelista and J. de Brito, 2012. The effect of superplasticizers on the mechanical performance of concrete made with fine recycled concrete aggregates. Cement Concrete Compos., 34: 1044-1052.
     CrossRef  |  Direct Link  |  
127. Pereira, P., L. Evangelista and J. de Brito, 2012. The effect of superplasticisers on the workability and compressive strength of concrete made with fine recycled concrete aggregates. Constr. Build. Mater., 28: 722-729.
     CrossRef  |  Direct Link  |  
128. Neves,R.,F.A. Branco and J. de Brito, 2012. A method for the use of accelerated carbonation tests in durability design. Constr. Build. Mater., 36: 585-591.
     CrossRef  |  Direct Link  |  
129. Neves, R., F.Branco, J.de Brito, 2012. About the statistical interpretation of air permeability assessment results. Mater. Struct., 45: 529-539.
     CrossRef  |  Direct Link  |  
130. Neto, N. and J. de Brito, 2012. Validation of an inspection and diagnosis system for anomalies in natural stone cladding (NSC). Constr. Build. Mater., 30: 224-236.
     CrossRef  |  Direct Link  |  
131. Monteiro, I., F.A. Branco, J. de Brito and R. Neves, 2012. Statistical analysis of the carbonation coefficient in open air concrete structures. Constr. Build. Mater., 29: 263-269.
     CrossRef  |  Direct Link  |  
132. Garcez, N., N. Lopes, J. de Brito and J. Silvestre, 2012. System of inspection, diagnosis and repair of external claddings of pitched roofs. Construct. Build. Mater., 35: 1034-1044.
     Direct Link  |  
133. Garcez, N., N. Lopes, J. de Brito and G. Sa, 2012. Pathology, diagnosis and repair of pitched roofs with ceramic tiles: Statistical characterisation and lessons learned from inspections. Constr. Build. Mater., 36: 807-819.
     CrossRef  |  Direct Link  |  
134. Gaiao, C., J. de Brito and J.D. Silvestre, 2012. Gypsum plasterboard walls: Inspection, pathological characterization and statistical survey using an expert system. Mater. de Construccion, 62: 285-297.
     CrossRef  |  Direct Link  |  
135. Freire, T., A.S. Silva, M.D.R. Veiga and J. de Brito, 2012. Characterisation of Decorative Portuguese Gypsum Plasters from the Nineteenth and Twentieth Centuries: The Case of the Bolsa Palace in Oporto. In: Historic Mortars. Bartos, P., C. Groot and J.J. Hughes (Eds.). Springer Netherlands, France, ISBN: 978-940074634-3, pp: 141-151.
136. Ferreira, L., J. de Brito and N. Saikia, 2012. Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate. Constr. Build. Mater., 36: 196-204.
     CrossRef  |  Direct Link  |  
137. Delgado, A., J. de Brito and J.D. Silvestre, 2012. Inspection and diagnosis system for wood flooring. J. Performance Constructed Facilities, 27: 564-574.
     Direct Link  |  
138. De Brito, J. and N. Saikia, 2012. Use of Industrial Waste as Aggregate: Properties of Concrete. In: Recycled Aggregate in Concrete, De Brito, J. and N. Saikia (Eds.)., Springer, London, New York, ISBN: 978-144714539-4, pp: 115-228.
139. De Brito, J. and N. Saikia, 2012. Use of Construction and Demolition Waste as Aggregate: Properties of Concrete. In: Recycled Aggregate in Concrete, De Brito, J. and N. Saikia (Eds.)., Springer, London, New York, ISBN: 978-144714539-4, pp: 229-337.
140. De Brito, J. and N. Saikia, 2012. Industrial Waste Aggregates. In: Recycled Aggregate in Concrete. de Brito, J. and N. Saikia, Springer London, New York, ISBN: 978-144714539-4 pp: 23-80.
141. Correia, J.R., A.M. Marques, C.M.C. Pereira and J. de Brito, 2012. Fire reaction properties of concrete made with recycled rubber aggregate. Fire Mater., 36: 139-152.
     CrossRef  |  Direct Link  |  
142. Coelho, A. and J. de Brito, 2012. Influence of construction and demolition waste management on the environmental impact of buildings. Waste Manage., 32: 532-541.
     CrossRef  |  Direct Link  |  
143. Bravo, M. and J. de Brito, 2012. Concrete made with used tyre aggregate: Durability-related performance. J. Cleaner Prod., 25: 42-50.
     Direct Link  |  
144. Braga, M., J. de Brito and R. Veiga, 2012. Incorporation of fine concrete aggregates in mortars. Constr. Build. Mater., 36: 960-968.
     CrossRef  |  Direct Link  |  
145. Amorim, P., J. de Brito and L. Evangelista, 2012. Concrete made with coarse concrete aggregate: Influence of curing on durability. ACI Mater. J., 109: 195-204.
     Direct Link  |  
146. Torgal, F.P., S. Miraldo, J.A. Labrincha and J. de Brito, 2012. An overview on concrete carbonation in the context of eco-efficient construction: Evaluation, use of SCMs and/or RAC. Construct. Build. Mater., 36: 141-150.
     CrossRef  |  Direct Link  |  
147. Vieira, J.P.B., J.R. Correia and J. de Brito, 2011. Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates. Cement Concrete Res., 41: 533-541.
     CrossRef  |  Direct Link  |  
148. Sousa, V., N. Almeida, I. Meireles and J. de Brito, 2011. Anomalies in wall renders: Overview of the main causes of degradation. Int. J. Archit. Heritage: Conserv. Anal. Restor., 5: 198-218.
     CrossRef  |  Direct Link  |  
149. Silvestre, J.D. and J. de Brito, 2011. Ceramic tiling in building facades: Inspection and pathological characterization using an expert system. Constr. Build. Mater., 25: 1560-1571.
     CrossRef  |  Direct Link  |  
150. Silva, P., J. de Brito and J. Costa, 2011. Viability of two new mixture design methodologies for self-consolidating concrete. ACI Mater. J., 108: 579-588.
     Direct Link  |  
151. Silva, A., J.L. Dias, P.L. Gaspar and J. de Brito, 2011. Service life prediction models for exterior stone cladding. Build. Res. Inform., 39: 637-653.
     CrossRef  |  Direct Link  |  
152. Silva, A., J. de Brito and P.L. Gaspar, 2011. Service life prediction model applied to natural stone wall claddings (directly adhered to the substrate). Constr. Build. Mater., 25: 3674-3684.
     CrossRef  |  Direct Link  |  
153. Pereira, A., F. Palha, J.D. de Brito and J.D. Silvestre, 2011. Inspection and diagnosis system for gypsum plasters in partition walls and ceilings. Const. Build. Mater., 25: 2146-2156.
     Direct Link  |  
154. Palha, F., A. Pereira, J. de Brito and J.D. Silvestre, 2011. Effect of water on the degradation of gypsum plaster coatings: Inspection, diagnosis and repair. J. Perform. Constr. Facili., 26: 424-432.
     CrossRef  |  Direct Link  |  
155. Neto, N. and J. de Brito, 2011. Inspection and defect diagnosis system for natural stone cladding. J. Mater. Civil Eng., 23: 1433-1443.
     Direct Link  |  
156. Morgado, F., G.J. Lopes, J. de Brito and J. Feiteira, 2011. Portuguese irrigation canals: Lining solutions, anomalies and rehabilitation. J. Perform. Constr. Facili., 26: 507-515.
     CrossRef  |  Direct Link  |  
157. Margalha, G., R. Veiga, A.S. Silva and J. de Brito, 2011. Traditional methods of mortar preparation: The hot lime mix method. Cement Concrete Compos., 33: 796-804.
     CrossRef  |  Direct Link  |  
158. Goncalves, M., J.G. Lopes and J. de Brito, 2011. Mechanical performance of lap joints of flat roof waterproofing membranes subjected to artificial weathering. Exp. Tech., 35: 21-28.
     Direct Link  |  
159. Gomes, M.I., M. Lopes and J. de Brito, 2011. Seismic resistance of earth construction in Portugal. Eng. Struct., 33: 932-941.
     CrossRef  |  Direct Link  |  
160. Gaspar, P.L. and J. de Brito, 2011. Limit states and service life of cement renders on facades. J. Mater. Civil Eng., 23: 1396-1404.
161. Gaiao, C., J. de Brito and J. Silvestre, 2011. Inspection and diagnosis of gypsum plasterboard walls. J. Perform. Constr. Facil., 25: 172-180.
     Direct Link  |  
162. Fonseca, N., J. de Brito and L. Evangelista, 2011. The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste. Cement Concrete Compos., 33: 637-643.
     CrossRef  |  Direct Link  |  
163. Flores-Colen, I., J.M.C.L. de Brito and V.P. de Freitas, 2011. On-site performance assessment of rendering facades for predictive maintenance. Struct. Survey, 29: 133-146.
     Direct Link  |  
164. Ferreira, L., J. de Brito and M. Barra, 2011. Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties. Mag. Concrete Res., 63: 617-627.
     Direct Link  |  
165. Coelho, A. and J. de Brito, 2011. Generation of construction and demolition waste in Portugal. Waste Manage. Res., 29: 739-750.
     Direct Link  |  
166. Coelho, A. and J. de Brito, 2011. Economic analysis of conventional versus selective demolition-A case study. Resour. Conserv. Recycl., 55: 382-392.
     CrossRef  |  Direct Link  |  
167. Coelho, A. and J. de Brito, 2011. Distribution of materials in construction and demolition waste in Portugal. Waste Manage. Res., 29: 843-853.
     CrossRef  |  Direct Link  |  
168. Bordalo, R., J. de Brito, P.L. Gaspar and A. Silva, 2011. Service life prediction modelling of adhesive ceramic tiling systems. Build. Res. Inform., 39: 66-78.
     CrossRef  |  Direct Link  |  
169. Silva, J., J. de Brito and R. Veiga, 2010. Recycled red-clay ceramic construction and demolition waste for mortars production. J. Mater. Civil Eng., 22: 236-244.
     CrossRef  |  Direct Link  |  
170. Penteado, M.D.L. and J. de Brito, 2010. Expert knowledge-based selection methodology for optimizing the construction of concrete piles. J. Perform. Constr. Facili., 26: 95-103.
     CrossRef  |  Direct Link  |  
171. Lima, J.M. and J. de Brito, 2010. Management system for expansion joints of road bridges. Struct. Infrastruct. Eng., 6: 703-714.
     CrossRef  |  Direct Link  |  
172. Henriques, D.F., L. Nunes and J. de Brito, 2010. Development of a penetration test for timber impregnation products for use in old buildings. Constr. Build. Mater., 24: 1095-1100.
     CrossRef  |  Direct Link  |  
173. Goncalves, P. and J. De Brito, 2010. Recycled Aggregate Concrete (RAC)-comparative analysis of existing specifications. Mag. Concr. Res., 62: 339-346.
     CrossRef  |  Direct Link  |  
174. Freire, T., A.S. Silva, R. Veiga and J. de Brito, 2010. Characterization of Portuguese historical gypsum mortars: A comparison between two case studies. Mater. Sci. Forum, 636: 1258-1265.
175. Flores-Colen, I., L. Silva, J. de Brito and V.P. de Freitas, 2010. In-service parameters from facade rendering mortars: Bulk density and open porosity determined from samples collected in situ. Struct. Surv., 28: 17-27.
     CrossRef  |  Direct Link  |  
176. Flores-Colen, I. and J. de Brito, 2010. Discussion of proactive maintenance strategies in facades' coatings of social housing. J. Build. Appraisal, 5: 223-240.
     CrossRef  |  Direct Link  |  
177. Flores-Colen, I. and J. de Brito, 2010. A systematic approach for maintenance budgeting of buildings facades based on predictive and preventive strategies. Constr. Build. Mater., 24: 1718-1729.
     CrossRef  |  Direct Link  |  
178. Evangelista, L. and J. de Brito, 2010. Durability performance of concrete made with fine recycled concrete aggregates. Cem. Concr. Compos., 32: 9-14.
     CrossRef  |  Direct Link  |  
179. De Brito, J., F. Branco, J. Ferreira and R. Santos, 2010. Load testing of the viaducts of the North-South railway crossing in Lisbon. Exp. Tech., 34: 38-48.
     CrossRef  |  Direct Link  |  
180. De Brito, J., 2010. Abrasion resistance of concrete made with recycled aggregates. Int. J. Sustainable Eng., 3: 58-64.
     CrossRef  |  Direct Link  |  
181. De Brito, J. and R. Robles, 2010. Recycled Aggregate Concrete (RAC) methodology for estimating its long-term properties. Indian J. Eng. Mater. Sci., 17: 449-462.
     Direct Link  |  
182. De Brito, J. and F. Alves, 2010. Concrete with recycled aggregates: the Portuguese experimental research. Mater. Struct., 43: 35-51.
     CrossRef  |  Direct Link  |  
183. Silvestre, J.D. and J. de Brito, 2009. Inspection and repair of ceramic tiling within a building management system. J. Mater. Civil Eng., 22: 39-48.
     CrossRef  |  Direct Link  |  
184. Silvestre, J.D. and J. de Brito, 2009. Ceramic tiling inspection system. Constr. Build. Mater., 23: 653-668.
     CrossRef  |  Direct Link  |  
185. Silva, J., J. de Brito and R. Veiga, 2009. Incorporation of fine ceramics in mortars. Constr. Build. Mater., 23: 556-564.
     CrossRef  |  Direct Link  |  
186. Lima, J.M. and J. de Brito, 2009. Inspection survey of 150 expansion joints in road bridges. Eng. Struct., 31: 1077-1084.
     CrossRef  |  Direct Link  |  
187. Gomes, M. and J. de Brito, 2009. Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: Durability performance. Mater. Struct., 42: 663-675.
     CrossRef  |  Direct Link  |  
188. Flores-Colen, I., J. de Brito and V. de Freitas, 2009. Expected render performance assessment based on impact resistance in situ determination. Constr. Build. Mater., 23: 2997-3004.
     CrossRef  |  Direct Link  |  
189. Flores-Colen, I., J. de Brito and V. Freitas, 2009. Discussion of criteria for prioritization of predictive maintenance of building facades: Survey of 30 experts. J. Perform. Constr. Facil., 24: 337-344.
     CrossRef  |  Direct Link  |  
190. Flores‐Colen, I., J. De Brito and F. Branco, 2009. In situ adherence evaluation of coating materials. Exp. Tech., 33: 51-60.
     CrossRef  |  Direct Link  |  
191. De Brito, J. and F. Branco, 2009. Structural condition survey of ancient bullfighting arenas. J. Build. Appraisal, 5: 7-28.
     CrossRef  |  Direct Link  |  
192. Silva, J., J. de Brito and R. Veiga, 2008. Fine ceramics replacing cement in mortars Partial replacement of cement with fine ceramics in rendering mortars. Mater. Struct., 41: 1333-1344.
     Direct Link  |  
193. Goncalves, M., J.G. Lopes, J. De Brito and G.A. Lopes, 2008. Mechanical performance of lap joints of flat roof waterproofing membranes. Exp. Tech., 32: 50-57.
     Direct Link  |  
194. Gaspar, P.L. and J. de Brito, 2008. Quantifying environmental effects on cement-rendered facades: A comparison between different degradation indicators. Buil. Environ., 43: 1818-1828.
     Direct Link  |  
195. Gaspar, P.L. and J. De Brito, 2008. Service life estimation of cement-rendered facades. Buil. Res. Inform., 36: 44-55.
     Direct Link  |  
196. Garcia, J. and J. de Brito, 2008. Inspection and diagnosis of epoxy resin industrial floor coatings. J. Mater. Civil Eng., 20: 128-136.
     Direct Link  |  
197. Flores-Colen, I., J. de Brito and V.P. de Freitas, 2008. Stains in facades rendering-diagnosis and maintenance techniques classification. Construct. Build. Mater., 22: 211-221.
     Direct Link  |  
198. Cotrim, H., M. do Rosario Veiga and J. de Brito, 2008. Freixo palace: Rehabilitation of decorative gypsum plasters. Constr. Build. Mater., 22: 41-49.
     CrossRef  |  Direct Link  |  
199. Branco, F., P. Mendes and J. de Brito, 2008. Study of the efficiency of aircraft safety barriers in madeira airport. J. Perform. Const. Facil., 22: 316-322.
     Direct Link  |  
200. Evangelista, L. and J. de Brito, 2007. Mechanical behaviour of concrete made with fine recycled concrete aggregates. Cement Concrete Composites, 29: 397-401.
     Direct Link  |  
201. Almeida, N., F. Branco, J. de Brito and J.R. Santos, 2007. High-performance concrete with recycled stone slurry. Cement Concrete Res., 37: 210-220.
     Direct Link  |  
202. De Brito, J., A.S. Pereira and J.R. Correia, 2005. Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates. Cem. Concr. Compos., 27: 429-433.
     CrossRef  |  Direct Link  |  
203. Santos, J.R.D., F. Branco and J. De Brito, 2004. Mechanical properties of concrete with coarse recycled aggregates. Int. Assoc. Bridge Struct. Eng., 14: 213-215.
     Direct Link  |  
204. Dos Santos, J.R., F.A. Branco and J. de Brito, 2002. Assessment of concrete structures subjected to fire-the FBTest. Mag. Concr. Res. Magazine, 54: 203-208.
     CrossRef  |  Direct Link  |  
205. De Brito, J., S. Santos and F.A. Branco, 2002. Inspectionability of bridges. Struct. Concr., 3: 29-34.
     CrossRef  |  Direct Link  |  
206. De Brito, J., 2002. Balanced compatible dynamic analyses. Eng. Struct., 24: 811-823.
     CrossRef  |  Direct Link  |  
207. De Brito, J., R. Dos Santos and F.A. Branco, 2000. Evaluation of the technical performance of concrete vegetable oil based release agents. Mater. Struct., 33: 262-269.
     Direct Link  |  
208. De Brito, J., D. Santos and F.A. Branco, 2000. Environmentally sound concrete release agents. Mag. Concr. Res., 52: 265-273.
     Direct Link  |  
209. De Brito, J. and M. Lopes, 1998. EUROCODE 8 and structural analysis methods and models. Int. J. Eng. Model., 11: 41-48.
     Direct Link  |  
210. De Brito, J. and F.A. Branco, 1998. Road bridges functional failure costs and benefits. Can. J. Civ. Eng., 25: 261-270.
     Direct Link  |  
211. De Brito, J. and F.A. Branco, 1998. Concrete bridge management: From design to maintenance. Pract. Period. Struct. Des. Constr., 3: 68-75.
     Direct Link  |  
212. De Brito, J. and F.A. Branco, 1998. Computer-aided lifecycle costs prediction in concrete bridges. Int. J. Eng. Model., 11: 97-106.
     Direct Link  |  
213. De Brito, J., F.A. Branco, P. Thoft-Christensen and J.D Sorensen, 1997. An expert system for concrete bridge management. Eng. Struct., 19: 519-526.
     Direct Link  |  
214. De Brito, J. F.A. Branco and M. Ibanez, 1994. Knowledge-based concrete bridge inspection system. Concr. Int., 16: 59-63.
     Direct Link  |