1. Othman, N.K., M.N. Zulkifli, A. Jalar and S. Abdullah, 2011. Nanoindentation test for the stiffness distribution analysis of bonded Au ball bonds. Adv. Mater. Res., 154-155: 674-677.
   CrossRef  |  
2. Nopiah, Z.M., S. Abdullah, M.N. Baharin, T.E. Putra, S.N. Sahadan and K.O. Willis, 2011. Comparative study on data editing techniques for fatigue time series signals. Adv. Mater. Res., 146-147: 1681-1684.
   CrossRef  |  
3. Jalar, A., M.N. Zulkifli and S. Abdullah, 2011. Nanoindentation test for the strength distribution analysis of bonded Au ball bonds. Adv. Mater. Res., 148-149: 1163-1166.
   CrossRef  |  
4. Abdullah, S., M.N. Zulkifli and A. Jalar, 2011. Nanoindentation approach for evaluation of process parameters effect on the strength of bonded Au ball bonds. Adv. Mater. Res., 148-149: 1129-1132.
   CrossRef  |  
5. Abdullah, S., M.F.M. Yunoh, A. Jalar and M.F. Abdullah, 2011. Hardness test on an epoxy mold compound of a quad flat no lead package using the depth sensing nanoindentation. Adv. Mater. Res., 146-147: 1000-1003.
   CrossRef  |  
6. Abdullah, S., M.B. Ali, M.Z. Nuawi, Z.M. Nopiah and A.K. Ariffin, 2011. Evaluating charpy impact signals with different frequencies using power spectrum densities. Adv. Mater. Res., 156-157: 1518-1521.
   CrossRef  |  
7. Yunoh, M.F.M., S. Abdullah, A. Jalar, M.F. Rosle and S.A. Radzi, 2010. Micromechanical studies of 4N gold wire for fine pitch wirebonding. J. Sci. Technol., 2: 121-134.
   Direct Link  |  
8. Yunoh, M.F.M., S. Abdullah and A. Jalar, 2010. Mechanical properties of QFN semiconductor package using flexural test. World Applied Sci. J., 9: 40-42.
9. Wahab, M.Z.A., A. Jalar, S. Abdullah and H. Mamat, 2010. Characterization of 0.5μm BiCMOS gate oxide using time dependent dielectric breakdown test. J. Adv. Mater. Res., 97: 40-44.
   CrossRef  |  Direct Link  |  
10. Shuid, A.N., S. Mohamad, N. Mohamed, F.M. Fadzilah and S.A. Mokhtar et al., 2010. Effects of calcium supplements on fracture healing in a rat osteoporotic model. J. Orthop. Res., 28: 1651-1656.
    CrossRef  |  PubMed  |  Direct Link  |  
11. Putra, T.E., S. Abdullah, M.Z. Nuawi and Z.M. Nopiah, 2010. Wavelet coefficient extraction algorithm for extracting fatigue features in variable amplitude fatigue loading. J. Applied Sci., 10: 277-283.
    CrossRef  |  
12. Nuawi, M.Z., T.I. Mohamad, M.F.H. Hussin, S. Abdullah, R. Zulkifli and M.K. Zakaria, 2010. Preliminary study of Condition-Based Monitoring (CBM) on automotive gearbox using ultrasonic signals. World Applied Sci. J., 9: 118-126.
    Direct Link  |  
13. Nopiah, Z.M., M.N. Baharin, S. Abdullah, M.I. Khairir and A. Ariffin, 2010. Running damage extraction technique for identifying fatigue damaging events. Wseas Trans. Math., 9: 324-333.
    Direct Link  |  
14. Nopiah, Z.M., M.I. Khairir, S. Abdullah, M.N. Baharin and A. Ariffin, 2010. Time complexity estimation and optimisation of the genetic algorithm clustering method. Wseas Trans. Math., 9: 334-344.
    Direct Link  |  
15. Lennie, A., S. Abdullah, Z.M. Nopiah and M.N. Baharin, 2010. Behavioural investigation of fatigue time series using the statistical approach. J. Applied Sci., 10: 1714-1722.
    CrossRef  |  Direct Link  |  
16. Kornain, Z., A. Jalar, R. Rasid and S. Abdullah, 2010. Comparative study of phenolic- based and amine-based underfill materials in flip chip plastic ball grid array package. J. Electron. Packag., Vol. 132, 10.1115/1.4002741.
    CrossRef  |  
17. Kornain, Z., A. Jalar, R. Rasid and S. Abdullah, 2010. An optimization of two-steps curing profile to eliminate voids formation in underfill epoxy for Hi-CTE flip chip packaging. J. Adv. Mater. Res., 97: 23-27.
    CrossRef  |  
18. Abdullah, S., T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin and L. Abdullah, 2010. The morlet wavelet analysis for fatigue feature clustering. Wseas Trans. Math., 9: 345-354.
    Direct Link  |  
19. Abdullah, S., T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin and L. Abdullah, 2010. Extracting fatigue damage features using STFT and CWT. Wseas Trans. Signal Process., 6: 91-100.
    Direct Link  |  
20. Abdullah, S., N. Ismail, M.Z. Nuawi, M.Z. Nopiah and A. Ariffin, 2010. Using the hybrid kurtosis-based method to correlate strain and vibration signals. Wseas Trans. Signal Process., 6: 79-90.
    Direct Link  |  
21. Abdullah, S., M.FM. Yunoh and A. Jalar, 2010. Three-point bending test behaviour of a QFN semiconductor package. Adv. Mater. Res., 97-101: 7-10.
    CrossRef  |  
22. Abdullah, S., M.F. Abdullah, A.K. Arifin, C.K.E. Nizwan, M.F.M. Yunoh and A. Jalar, 2010. Failure analysis of a semiconductor packaging leadframe using the signal processing approach. Int. J. Mod. Phys. B, 24: 175-182.
    CrossRef  |  
23. Salleh, S.H., M.Z. Omar, J. Syarif, M.J. Ghazali, S. Abdullah and Z. Sajuri, 2009. Investigation of microstructures and properties of440c martensitic stainless steel. Int. J. Mech. Materials Eng., 4: 21-24.
    Direct Link  |  
24. Refngah, F.N.A., S. Abdullah, A. Jalar and L.B. Chua, 2009. Fatigue life evaluation of two types of steel leaf springs. Int. J. Mech. Mater. Eng., 4: 34-38.
25. Rahman, M.M., A.K. Ariffin, S. Abdullah, M.M. Noor, R.A. Bakar and M.A. Maleque, 2009. Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. Am. J. Applied Sci., 6: 715-725.
    Direct Link  |  
26. Rahman, M.M., A.K. Ariffin, S. Abdullah, M.M. Noor and A.B. Rosli, 2009. Durability assessment of cylinder block for two stroke free piston linear engine using random loading. Am. J. Applied Sci., 6: 726-735.
    Direct Link  |  
27. Nuawi, M.Z., F. Lamin, A.R. Ismail, S. Abdullah and Z. Wahid, 2009. A novel machining signal filtering technique: Z-notch filter. J. World Acad. Sci. Eng. Technol., 54: 24-29.
    Direct Link  |  
28. Nopiah, Z.M., M.I. Khairir, S. Abdullah, C.K.E. Nizwan and M.N. Baharin, 2009. Peak-valley segmentation algorithm for kurtosis analysis and classification of fatigue time series data. Eu. J. Sci. Res., 29: 113-125.
29. Jalar, A., A.R. Daud, I. Abdullah, M.A.A. Hamid, M.F. Rosle and S. Abdullah, 2009. Effect of manufacturing stresses to die attach film performance in quad flatpack no-lead stacked die packages. Am. J. Eng. Applied Sci., 2: 17-24.
    CrossRef  |  Direct Link  |  
30. Budiman, H., M.Z. Omar, A. Jalar, J. Syarif, M.J. Ghazali and S. Abdullah, 2009. Production of feedstock material for semi-solid materialprocessing by cooling slope casting process. Int. J. Mech. Mater. Eng., 4: 74-78.
    Direct Link  |  
31. Beden, S.M., S. Abdullah, A.K. Ariffin, M.M. Rahman and N.A. Al-Asady, 2009. Fatigue life assessment of different steel-based shell materials under variable amplitude loadings. Eur. J. Sci. Res., 29: 157-169.
    Direct Link  |  
32. Beden, S.M., S. Abdullah and A.K. Ariffin, 2009. Towards standardising the fatigue crack simulation studies on metallic materials. ICCES, 10: 41-50.
    Direct Link  |  
33. Beden, S.M., S. Abdullah and A.K. Ariffin, 2009. Review of fatigue crack propagation models for metallic components. Eur. J. Sci. Res., 28: 364-397.
    Direct Link  |  
34. Beden, S.M., S. Abdullah and A.K. Ariffin, 2009. A modeling of fatigue crack growth under constant and variable amplitude loading for aluminum alloy. Int. J. Mech. Mater. Eng., 4: 29-33.
35. Al-Asady, N.A., S. Abdullah, A.K. Ariffin, S.M. Beden and M.M. Rahman, 2009. FEA based durability using strain-life models for different medium carbon steel as fabrication mater. Int. J. Mech. Mater. Eng., 4: 39-44.
    Direct Link  |  
36. Abdullah, S., S.M. Beden, A.K. Ariffin and N.A. Al-Asady, 2009. Fatigue crack growth modelling of aluminium alloy under constant and variable amplitude loadings. J. Struct. Duribility Health Monitor., 5: 109-131.
37. Abdullah, S., M.F.M. Yunoh, A. Jalar And H. Kamarudin, 2009. Role of strain rate on the micromechanical characterization properties of 4N gold micro wire: Micro tensile and NanoIndentation. Eu. J. Sci. Res., 28: 33-34.
    Direct Link  |  
38. Abdullah, S., M.F. Abdullah, A.K. Ariffin and A. Jalar, 2009. Thermal-mechanical analysis of a different leadframe thickness of semiconductor package under the reflow process. Am. J. Applied Sci., 6: 616-625.
    CrossRef  |  Direct Link  |  
39. Abdullah, S., M.F. Abdullah, A.K. Ariffin and A. Jalar, 2009. Effect of leadframe oxidation on the reliability of a quad flat no-lead package. J. Electronic Packag., 131: 031002-1-031002-7.
    CrossRef  |  
40. Abdullah, S., M. Loman and N. Jamaluddin, 2009. Signal processing method for evaluating fatigue damage in a piping system. J. Applied Sci., 9: 2381-2389.
    CrossRef  |  Direct Link  |  
41. Abdullah, S., C.K.E. Nizwan and M.Z. Nuawi, 2009. A study of fatigue data editing using the Short-Time Fourier Transform (STFT). Am. J. Applied Sci., 6: 565-575.
    CrossRef  |  Direct Link  |  
42. Abdullah, S., A. Fahruddin, J. Syarif and M.Z. Omar, 2009. Modelling of fiber metal laminate (Fml) composite using the residual stiffness and strength model. J. Mech. Materials Eng., 4: 87-91.
    Direct Link  |  
43. Wahab, D.A., N.F.A. Manan, M.A. Hannan, S. Abdullah and A. Hussain, 2008. Designing for comfort and reliability in an intelligent car seat. Am. J. Applied Sci., 5: 1787-1792.
    CrossRef  |  Direct Link  |  
44. Talib, S.A., A. Zaharim, J. Ariffin, Y.C. Yang and S. Abdullah, 2008. Route to becoming a member of evaluation panel for the Engineering Accreditation Council (EAC) of Malaysia. Int. J. Educ. Inform. Technol., 1: 49-51.
    Direct Link  |  
45. Rahman, M.M., A.K. Ariffin, M.J.M. Nor and S. Abdullah, 2008. Fatigue analysis of Spot-welded joint for automotive structures. J. Struct. Durability Health Monit., 4: 173-180.
46. Rahman, M.M., A.K. Arffin, N. Jamaludin, S. Abdullah and M.M. Noor, 2008. Finite element based fatigue life prediction of a new free piston engine mounting. J. Applied Sci., 8: 1612-1621.
    CrossRef  |  Direct Link  |  
47. Nuawi, M.Z., S. Abdullah, A.R. Ismail, R. Zulkifli, M.K. Zakaria and M.F.H. Hussin, 2008. A study on ultrasonic signals processing generated from automobile engine block using statistical analysis. WSEAS Trans. Signal Proc., 4: 279-288.
    Direct Link  |  
48. Nuawi, M.Z., M.J.M. Nor, N. Jamaludin, S. Abdullah, F. Lamin and C.K.E. Nizwan, 2008. Development of integrated kurtosis-based algorithm for z-filter technique. J. Applied Sci., 8: 1541-1547.
    CrossRef  |  Direct Link  |  
49. Nopiah, Z.M., M.N. Baharin, S. Abdullah, M.I. Khairir and C.K.E. Nizwan, 2008. Abrupt changes detection in fatigue data using the cumulative sum method. Wseas Trans. Math., 7: 708-717.
    Direct Link  |  
50. Nopiah, Z.M., M.I. Khairir, S. Abdullah and C.K.E. Nizwan, 2008. Peak-valley segmentation algorithm for fatigue time series data. Wseas Tran. Math., 7: 698-707.
    Direct Link  |  
51. Mohamed, I., A. Zaharim, S. Abdullah and M.S. Yahya, 2008. An evaluation of test statistics for detecting level change in BL(1,1,1,1) models. WSEAS Trans. Math., 7: 67-70.
    Direct Link  |  
52. Ismail, A., S. Abdullah, A. Zaharim and I. Ahmad, 2008. Modeling lane-changing behavior based on queue length at an urban signalized intersection. Int. J. Math. Models Methods Applied Sci., 1: 294-299.
    Direct Link  |  
53. Ghazali, M.J., W.M. Rainforth, S. Abdullah, A.K.A. Ihsan and M. Hassan, 2008. Subsurface deformation of worn al-cu and al-mg alloys. Adv. Mater. Res., 33: 483-488.
    CrossRef  |  
54. Ariffin, A.K., M.R.M. Akramin, S. Huzni, S. Abdullah and M.J. Ghazali, 2008. Probabilistic analysis of cracked structures with uncertainty parameters. Adv. Mater. Res., 33: 223-228.
    CrossRef  |  
55. Abdullah, S., Z.A. Aziz, I. Ahmad, M.F. Abdullah and M.F. Mod Yunoh, 2008. Gold wire neck strength on different combinations of looping parameters. J. Solid State Sci. Technol., 16: 232-239.
56. Abdullah, S., Z.A. Aziz, I. Ahmad, M.F. Abdullah and M.F. Mod Yunoh, 2008. Effects of looping formation on wire sweeping problem of a newly developed QFN package. J. Solid State Sci. Technol., 16: 247-254.
57. Abdullah, S., Z.A. Aziz, I. Ahmad and M.F. Abdullah, 2008. Low looping challenges in the QFN wire bonding process. J. Solid State Sci. Technol., 16: 25-32.
58. Abdullah, S., Z. Endut, I. Ahmad, A. Jalar and S.M. Yusof, 2008. Dicing laminated wafer for QFN 3D stacked die packaging. J. Adv. Mater. Res., 31: 202-205.
    CrossRef  |  Direct Link  |  
59. Abdullah, S., S.N. Sahadan, M.Z. Nuawi and Z.M. Nopiah, 2008. Fatigue road signal denoising process using the 4th order of daubechies wavelet transforms. J. Applied Sci., 8: 2496-2509.
    CrossRef  |  Direct Link  |  
60. Abdullah, S., S.M. Yusof, A. Jalar, M.F. Abdullah, Z.A. Aziz and R. Daud, 2008. Step cut for dicing laminated wafer in a QFN package. J. Solid State Sci. Technol., 16: 198-206.
61. Abdullah, S., S.M. Beden, A.K. Ariffin and M.M. Rahman, 2008. Fatigue life assessment for metallic structure: A case study of shell structure under variable amplitude loading. J. Applied Sci., 8: 1622-1631.
    CrossRef  |  Direct Link  |  
62. Abdullah, S., N.A. Al-Asady, A.K. Ariffin and M.M. Rahman, 2008. A review on finite element analysis approaches in durability assessment of automotive components. J. Applied Sci., 8: 2192-2201.
    CrossRef  |  Direct Link  |  
63. Abdullah, S., M.F. Abdullah, A.K. Ariffin, S. Yusof, R. Daud and Z.A. Aziz, 2008. Copper leadframe analysis using thermomechanical approach. J. Solid State Sci. Technol., 16: 164-172.
64. Abdullah, S., M.F. Abdullah, A.K. Ariffin, M.N. Baharin, Z.A. Aziz and M.F. Mod Yunoh, 2008. Effect of package delamination under 3-points bending test: A case study using cyclic loading. J. Solid State Sci. Technol., 16: 72-82.
65. Abdullah, S., M.F. Abdullah, A.K. Ariffin, M.N. Baharin, Z.A. Aziz and M.F. Mod Yunoh, 2008. Comparison in between good and oxidized leadframe: A case study in package delamination analysis. J. Solid State Sci. Technol., 16: 223-231.
66. Abdullah, S., M.D. Ibrahim, Z. Mohd Nopiah and A. Zaharim, 2008. Analysis of a variable amplitude fatigue loading based on the quality statistical approach. J. Applied Sci., 8: 1590-1593.
    CrossRef  |  Direct Link  |  
67. Abdullah, S., M.D. Ibrahim, A. Zaharim and Z.M. Nopiah, 2008. Statistical analysis of a nanostationary fatigue data using the ARIMA approach. WSEAS Trans. Math., 7: 59-66.
    Direct Link  |  
68. Abdullah, S., M. Faizal Abdullah and A. Kamal Ariffin, 2008. The effect of leadframe oxidation of a quad flat no-lead semiconductor package under cyclic loading. J. Applied Sci., 8: 1676-1683.
    CrossRef  |  Direct Link  |  
69. Zaharim, A., I. Ahmad, M.D. Ibrahim and S. Abdullah, 2007. Application of moving average approaches in analysing fatigue road loading. Res. J. Applied Sci., 2: 600-605.
    CrossRef  |  Direct Link  |  
70. Wahab, D.A. and S. Abdullah, 2007. Enhancement of capabilities in design synthesis through the concurrent application of design methodologies. J. Eng. Applied Sciences, 2: 248-255.
    CrossRef  |  Direct Link  |  
71. Rahman, M.M., A.K. Ariffin, S. Abdullah and N. Jamaludin, 2007. Finite element based durability assessment of a free piston linear engine component. Struct. Durability Health Monit., 3: 1-14.
    CrossRef  |  
72. Rahman, M.M., A.K. Ariffin and S. Abdullah, 2007. Finite element based vibration fatigue analysis of a new Two-stroke linear generator engine component. Int. J. Mech. Mater. Eng., 2: 63-74.
73. Nuawi, M.Z. and S. Abdullah, 2007. Recognising fatigue damaging features in variable amplitude loadings using the s-transform approach. J. Eng. Applied Sciences, 2: 753-759.
    CrossRef  |  Direct Link  |  
74. Nuawi, M. Z., F. Lamin, M.J.M. Nor, N. Jamaluddin, S. Abdullah and C.K.E. Nizwan, 2007. Integration of I-kaz coefficient and taylor tool life curve for tool wear progression monitoring in machining process. Int. J. Mech., 4: 44-50.
75. Ismail, A., A. Zaharim, S. Abdullah, Z.M. Nopiah and F.L.M. Isa, 2007. A longitudinal study of first year engineering students' performance at the Universiti Kebangsaan Malaysia: Before and after the implementation of the OBE approach. Int. J. Edu. Inf. Technol., 1: 52-55.
    Direct Link  |  
76. Abdullah, S., M.Z. Nuawi and A. Zaharim, 2007. Application of a computational data editing algorithm to summarise fatigue road loadings. WSEAS Tran. Comput. Res., 2: 109-114.
77. Abdullah, S., 2007. The wavelet transform for fatigue history editing: Is it applicable for automotive applications. J. Eng. Applied Sci., 2: 342-349.
    CrossRef  |  Direct Link  |  
78. Zaharim, A., I. Mohamed, I. Ahmad, S. Abdullah and M.Z. Omar, 2006. Performances test statistics for single outlier detection in bilinear (1,1,1,1) models. WSEAS Trans. Math., 5: 1359-1364.
79. Omar, M.Z., N.A. Nik Mohamed, A. Zaharim, S. Abdullah, S. M. Haris, A. Hassan and H. Basri, 2006. A study of employers' satisfaction of engineering graduates in Malaysia. WSEAS Trans. Adv. Eng. Edu., 3: 506-510.
80. Abdullah, S., J.C. Choi, J.A. Giacomin and J.R. Yates, 2006. Bump extraction algorithm for variable amplitude fatigue loading. Int. J. Fatigue, 28: 675-691.
    CrossRef  |  Direct Link  |  
81. Abdullah, S. and J.C. Choi, 2006. Using a fatigue data editing approach for analysing cycle sequence effects in variable amplitude road loadings. J. Inst. Eng. Malaysia, 67: 47-54.
82. Abdullah, S. and A. Zaharim, 2006. Using the orthogonal wavelet transform to identify fatigue features in variable amplitude fatigue loadings. WSEAS Trans. Signal Proc., 2: 1416-1420.
83. Abdullah, S., J.R. Yates and J.A. Giacomin, 2005. Fatigue data editing algorithm for automotive applications. J. Kejuruteraan UKM, 17: 71-84.
84. Abdullah, S., J.A. Giacomin and J.R. Yates, 2004. A mission synthesis algorithm for fatigue damage analysis. J. Automobile Eng., 218: 243-258.
    CrossRef  |  Direct Link  |  
85. Abdullah, S., 2001. Pengembangan reka bentuk konsep menerusi kaedah penganalisaan fungsi (development of the conceptual design using function analysis approach). J. Kejuruteraan UKM, 13: 63-72.
86. Abdullah, S., M.Z. Nuawi and M.Z. Omar, 2000. Design methodology development of a Tailor-made aortic stent. J. Inst. Eng., 61: 23-31.