1. Rajaravi, C. and P.R. Lakshminarayanan, 2017. 20. Effect of pouring temperature on A356-TiB2 MMCs cast in sand and permanent moulds by in-situ method. J. Mech. Behav. Mater., 10.1515/jmbm-2017-0004.
   CrossRef  |  Direct Link  |  
2. Kumar, P.S., P.R. Lakshminarayanan and R. Varahamoorthi, 2017. 21. Effect of pouring temperature on the TiB2 in Cast Al/ TiB2 MMC and prediction of distribution pattern by commercial simulation software. Adv. Nat. applied sci., 11: 321-331.
3. Rajaravi, C., P.R. Lakshminarayanan and K. Niranjan, 2016. Finite element modeling analysis on in-situ Al/TiB2 metal matrix composites. Indian J. Sci. Technol., 9: 1-5.
4. Rajaravi, C., P.R. Lakshminarayanan and B. Gobalakrishnan, 2016. Prediction of mechanical properties of Al/TiB2 MMCs cast through sand moulds by FEA validated by experimental results. J. Manuf. Eng., 11: 208-214.
5. Rajaravi, C. and P.R. Lakshminarayanan, 2016. Experimental and FEA of fracture toughness on in-situ Al/TiB₂ MMCs in different mould conditions. Int. Res. J. Eng. Technol., 3: 828-832.
   Direct Link  |  
6. Rajaravi, C. and P.R. Lakshminarayanan, 2016. Analysis on tensile strength of Al/TiB₂ MMCs in FEA for different mould conditions. IOSR J. Mech. Civil Eng., 13: 103-108.
7. Kumar, P.S., P.R. Lakshminarayanan and R. Varahamoorthi, 2016. Effect of cooling rate and other factors on size and pattern of distribution of TiB2particles formed during solidification of the Al-TiB₂ melt for various pouring temperatures. Int. Res. J. Eng. Technol., (IRJET), 03: 244-248.
   Direct Link  |  
8. Kumar, P.S., P. R. Lakshminarayanan and R. Varahamoorthi, 2016. 18. Effect of pouring temperature and holding time on hardness at various locations of Al/TiB2 MMC cast ingot. Int. J. Latest Eng. Res. Appl., (IJLERA), 01: 30-41.
9. Kumar, P.S. and P.R. Lakshminarayanan, 2016. 17. Effect on size and pattern of distribution of TiB2 particles formed during solidification of the Al- TiB2 MMC. IPASJ Int. J. Mech. Eng., 4: 1-8.
   Direct Link  |  
10. Rajaravi, C., K. Niranjan and P.R. Lakshminarayanan, 2015. Comparative analysis of Al/TiB₂ metal matrix composites in different mould conditions. J. Adv. Microsc. Res., 10: 260-264.
    CrossRef  |  Direct Link  |  
11. Rajaravi, C. and P.R. Lakshminarayanan, 2015. 12. Experimental and Finite element analysis of fracture toughness on Al/SiCp MMCs in different conditions. Int. J. Eng. Manag. Res., 5: 320-324.
12. Niranjan, K. and P.R. Lakshminarayanan, 2013. Optimization of process parameters for in situ casting of Al/TiB₂ composites through response surface methodology. Trans. Nonferrous Met. Soc. China, 23: 1269-1274.
    CrossRef  |  Direct Link  |  
13. Niranjan, K. and P.R. Lakshminarayanan, 2013. Dry sliding wear behaviour of in situ Al–TiB₂ composites. Mater. Des., 47: 167-173.
    CrossRef  |  Direct Link  |  
14. Satheeshkumar, V. and P.R. Lakshminarayanan, 2012. Developing mathematical models on tensile strength and acoustic emission count of ZE41A cast magnesium alloy. J. Alloys Compd., 537: 35-42.
    CrossRef  |  Direct Link  |  
15. Satheeshkumar, V. and P.R. Lakshminarayanan, 2011. Deformation processes in ZE41A cast magnesium alloy investigated by the acoustic emission technique. J. Alloys Compd, 509: 4327-4330.
    CrossRef  |  Direct Link  |  
16. Satheeshkumar, V. and P.R. Lakshminarayanan, 2011. 6. Modeling and analysis on tensile strength of ZE41A cast magnesium alloy. J. Emerging Technol. Mech. Sci. Eng., 2: 47-54.
17. Paventhan, R., P.R. Lakshminarayanan and V. Balasubramanian, 2011. Prediction and optimization of friction welding parameters for joining aluminium alloy and stainless steel. Trans. Nonferrous Metals Soc. China, 21: 1480-1485.
    CrossRef  |  Direct Link  |  
18. Paventhan, R., P.R. Lakshminarayanan and V. Balasubramanian, 2011. Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints. Mater. Des., 32: 1888-1894.
    CrossRef  |  Direct Link  |  
19. Parameshwaranpillai, T., P.R. Lakshminarayanan and B.N. Rao, 2011. Taguchi's approach to examine the effect of drilling induced damage on the notched tensile strength of woven GFR-epoxy composites. Adv. Compos. Mater., 20: 261-275.
    CrossRef  |  Direct Link  |  
20. Niranjan, K. and P.R. Lakshminarayanan, 2011. 5. Characterization of in-Situ based composites of cast Aluminium reinforced with TiB2. J. Em. Technol. Mech. Sci. Engi., 2: 45-48.
21. Parameshwaranpillai, T., P.R. Lakshminarayanan and B.N. Rao, 2010. Tensile fracture strength of 2124Al–10 vol.% SiCp composite compact tension specimens. Mater. Des., 31: 2987-2993.
    CrossRef  |  Direct Link  |  
22. Sivapragash, M., P.R. Lakshminarayanan, R. Karthikeyan, K. Ragukandan and M. Hanumantha, 2009. 3. Statistical analysis of fatigue life prediction of ZE 41A cast Magnesium alloy using weibull distribution. Int. J. Mech. Automobile Eng., 02: 59-66.
23. Sivapragash, M., P.R. Lakshminarayanan, R. Karthikeyan, K. Raghukandan and M. Hanumantha, 2008. Fatigue life prediction of ZE41A magnesium alloy using Weibull distribution. Mater. Design, 29: 1549-1553.
    CrossRef  |  Direct Link  |  
24. Sivapragash, M., P.R. Lakshminarayanan, K. Raghukandan, R. Karthikeyan and M. Hanumantha, 2008. Fatigue crack growth studies on ZE41A cast magnesium alloy. i-Manager's J. Fut. Eng. Technol., 4: 58-63.
    Direct Link  |  
25. Parameshwaranpillai, T. and P.R. Lakshminarayanan, 2008. 4. Fracture toughness of Sicp/2124Almetal matrix composite. J. Mater. Sci. Res. India, 5: 59-66.
    Direct Link  |  
26. Sivapragash, M., V. Sateeshkumar, P.R. Lakshminarayanan, R. Karthikeyan and M. Hanumantha, 2007. Optimization of heat treatment process of ze41a magnesium alloy using grey based taguchi method. J. Future Eng. Technol., 3: 63-69.
27. Sivapragash, M., P.R. Lakshminarayanan, R. Karthikeyan, M. Hanumantha and R.R. Bhatt, 2007. Hot deformation behaviour of ZE 41A magnesium alloy. J. Mate. Design, 29: 860-866.
28. Lakshminarayanan, P.R., G. Ganesan, S. Raju, R.S. Naagarazan and B.C. Pai, 2004. 1. Optimization of heat treatment conditions for wear resistance of Al/SiCp composites using goal programming. Ind. Eng. J., 33: 8-11.
29. Karthikeyan, R., P.L. Narayanan and R.S. Naagarazan, 1999. Mathematical modelling for electric discharge machining of aluminium–silicon carbide particulate composites. J. Mater. Proc. Technol., 87: 59-63.
    CrossRef  |  Direct Link  |