1. Raj, V.R., B.V. Ramnath, A.R. Prasad, C. Elanchezhian, E. Naveen and N. Ramanan, 2022. Time dependent behaviour of PMMA-Toughened siliconized SiC strengthened glass-epoxy composite. Silicon, 14: 4129-4138.
   CrossRef  |  Direct Link  |  
2. Murali, B., B.M.V. Ramnath, D. Rajamani, E.A. Nasr, A. Astarita and H. Mohamed, 2022. Experimental investigations on dry sliding wear behavior of kevlar and natural fiber-reinforced hybrid composites through an RSM-GRA hybrid approach. Materials, Vol. 15. 10.3390/ma15030749.
   CrossRef  |  Direct Link  |  
3. Idayan, A., C. Elanchezhian, B.V. Ramnath and K. Palanikumar, 2022. Wear evaluation and microstructure analysis of cryogenically treated AISI 440C bearing steel. Trans. Can. Soc. Mech. Eng., 46: 175-187.
   CrossRef  |  Direct Link  |  
4. Dinesha, S., C. Elanchezhian, B. Vijayaramnath and A. Adinarayanan, 2022. Influence of natural fibers on mechanical, thermal, water absorption and morphological characteristics of Kevlar Hybrid Epoxy composites for shipbuilding application. Indian J. Eng. Mater. Sci., 29: 526-533.
   CrossRef  |  Direct Link  |  
5. Raj, V.R. and B.V. Ramnath, 2021. Mechanical, thermal and wear behavior of SiC particle strengthening of PMMA-toughened glass-epoxy hybrid composite. Silicon, 13: 1925-1932.
   CrossRef  |  Direct Link  |  
6. Banu, M., V.R.B. Madhavan, D. Manickam and C. Devarajan, 2021. Experimental investigation on stacking sequence of Kevlar and natural fibres/epoxy polymer composites. Polímeros, Vol. 31. 10.1590/0104-1428.04320.
   CrossRef  |  Direct Link  |  
7. Venkataraman, K. and B. Vijayaramnath, 2019. Design optimization of an automotive component in product development. Int. J. Eng. Adv. Technol., 9: 6129-6135.
8. Ramnath, B.V., K. Alagarraja and C. Elanchezhian, 2019. Review on sandwich composite and their applications. Mater. Today Proc., 16: 859-864.
   CrossRef  |  Direct Link  |  
9. Ramnath, B.V., C. Elanchezhian, V.M. Manickavasagam, R.S. Narayanan, R. Sudharshan and G. Pugazhendhi, 2019. A review on sandwich composites and their advancements. Mater. Today Proc., 16: 1146-1151.
   CrossRef  |  Direct Link  |  
10. Ramakrishnan, G., B.V. Ramnath, C. Elanchezhian, A.A. Kumar and S. Gowtham, 2019. Investigation of mechanical behaviour of basalt-banana hybrid composites. Silicon, 11: 1939-1948.
    Direct Link  |  
11. Rajesh, S., B.V. Ramnath, B. Prashanth, P.M. Kumar, 2019. An effect of fiber orientation of tensile and compressive properties of natural hybrid composites. Int. J. Mech. Prod. Eng. Res. Dev., 9: 11-20.
12. Raja, A. and C. Elanchezhian, 2019. An integrated approach in selecting best supplier selection process in supply chain management using MAT LAB-A Review. Mater. Today Proc., 16: 1350-1356.
    CrossRef  |  Direct Link  |  
13. Raj, R.V., S. Rangarajan, B.V. Ramnath, D. and J. Jayapriya, 2019. Experimental research on roselle / glass fibre hybrid polymer composites. Int. J. Innov. Technol. Exp. Eng., 9: 4665-4669.
14. Raj, R.V., B.V. Ramnath, E. and N. Ramanan, 2019. Machining process parameters on green composite material. Int. J. Innov. Technol. Exp. Eng., 9: 3584-3587.
15. Murugan, S., B.V. Ramnath, C. Elanchezhian and R. Nandagopan, 2019. Analysis of mechanical and metallurgical properties of PMC gear material. Mater. Today Proc., 16: 524-531.
16. Murali, B., B.V. Ramnath and D. Chandramohan, 2019. Mechanical properties of boehmeria nivea reinforced polymer composite. Mater. Today Proc., 16: 883-888.
    CrossRef  |  Direct Link  |  
17. Munisamy, B., V.R.B. Madhavan, E. Chinnadurai and J. Janardhanan, 2019. Prediction of mechanical properties of Al6061 metal matrix composites reinforced with zircon sand and boron carbide. Mater. Testing, 61: 537-542.
    CrossRef  |  Direct Link  |  
18. Kumar, S.R., S. Krishnaraj, B.V. Ramnath, R.M. Adhitya, R.I. Anand, 2019. Impact and hardness characteristics of Cfrp-kenaf-abaca fiber composites. Int. J. Rec. Technol. Eng., 8: 3530-3533.
19. Kumar, K.S., C. Elanchezhian and B.V. Ramnath, 2019. Wind effects of an upstream building on a low-rise building. Mater. Today Proc., 16: 444-448.
    CrossRef  |  Direct Link  |  
20. Jeykrishnan, J., B.V. Ramnath, S.S. Vignesh, P. Sridharan and B. Saravanan, 2019. Optimization of process parameters in abrasive water jet machining/cutting (awjm) of nickel alloy using traditional analysis to minimize kerf taper angle. Mater. Today Proc., 16: 392-397.
    CrossRef  |  Direct Link  |  
21. Janarthanan, B., C. Elanchezhian, G.B. Bhaskar, N. Ramkumar and B.V. Ramnath, 2019. Relationship between fracture toughness and specimen thickness for quasi-isotropic titanium/epoxy laminates. Mater. Today Proc., 16: 865-869.
    CrossRef  |  Direct Link  |  
22. Idayan, A., C. Elanchezhian, B.V. Ramnath and K. Palanikumar, 2019. Role of cryogenic treatment on the microstructure and wear resistance of aisi 440c bearing steel. Caribbean J. Sci., 53: 516-533.
23. Ghias, S.A., B.V. Ramnath, C. Elanchezhian, S. Devarajan and R. Nandagopan, 2019. Wear analysis of Sintered Al-B4 Cp composite material. Mater. Today Proc., 16: 766-775.
24. Ghias, S.A., 2019. Analysis of the friction welding mechanism of low carbon steel–stainless steel and aluminium–copper. Mater. Today Proc., 16: 766-775.
    CrossRef  |  Direct Link  |  
25. Balachandar, M., B.V. Ramnath, S.A. Kumar and G.S. Sankar, 2019. Experimental evaluation on mechanical properties of natural fiber polymer composites with human hair. Mater. Today Proc., 16: 1304-1311.
    CrossRef  |  Direct Link  |  
26. Balachandar, M., B.V. Ramnath, R. Barath and S.B. Sankar, 2019. Mechanical characterization of natural fiber polymer composites. Mater. Today Proc., 16: 1006-1012.
    CrossRef  |  Direct Link  |  
27. Balachandar, M., B.V. Ramnath, P. Jagadeeshwar and R. Yokesh, 2019. Mechanical behaviour of Natural and Glass fiber reinforced with polymer matrix composite. Mater. Today Proc., 16: 1297-1303.
    CrossRef  |  Direct Link  |  
28. Sharavanana, S., B.V. Ramnath, C. Elanchezhianb and S. Rajesh, 2018. Experimental investigation of tensile and impact behaviour of hemp flax hybrid composite. Int. J. Mech. Prod. Eng. Res. Dev., 8: 549-556.
29. Sharavanan, S., B.V. Ramnath, M. Chandrasekaran and S. Rajesh, 2018. Experimental investigation of flexural and hardness behaviour of hemp flax hybrid composite. Int. J. Mech. Prod. Eng. Res. Dev., 8: 55-60.
30. Sharavanan, R., B.V. Ramnath and S. Prabhu, 2018. A review on natural fiber hybrid composites. Int. J. Mech. Prod. Eng. Res. Dev., 8: 943-948.
31. Sakthivel, M., S. Vijayakumar and B.V. Ramnath, 2018. Investigation on mechanical and thermal properties of stainless steel wire mesh-glass fibre reinforced polymer composite. Silicon, 10: 2643-2651.
    Direct Link  |  
32. Ramnath, B.V., J. Jeykrishnan, G. Ramakrishnan, B. Barath and E. Ejoelavendhan, 2018. Sea shells and natural fibres composites: A review. Mater. Today Proc., 5: 1846-1851.
    CrossRef  |  Direct Link  |  
33. Ramnath, B.V., C. Elanchezhian, S. Rajesh, S.J. Prakash, B.M. Kumaar and K. Rajeshkannan, 2018. Design and development of milling fixture for friction stir welding. Mater. Today Proc., 5: 1832-1838.
    CrossRef  |  Direct Link  |  
34. Ramnath, B.V., C. Elanchezhian, J. Jeykrishnan, R. Ragavendar, P.K. Rakesh, J.S. Dhamodar and A. Danasekar, 2018. Implementation of reverse engineering for crankshaft manufacturing industry. Mater. Today Proc., 5: 994-999.
    CrossRef  |  Direct Link  |  
35. Ramnath, B.V., C. Elanchezhian, E. Naveen, G. Rekha, M. Vidhyarajan, M. Manivannan and J. Dhanush, 2018. Implementation of concurrent redesign and manufacture procedure for an automotive component. Mater. Today Proc., 5: 1418-1424.
    CrossRef  |  Direct Link  |  
36. Rajesh, S., B.V. Ramnath, J. Jeykrishnan, S.J. Nathan and M.R. Karthik, 2018. Optimization of machining parameters of aramid natural hybrid composite in abrasive water jet machining using taguchi method. Adv. Sci. Eng. Med., 10: 451-454.
    CrossRef  |  Direct Link  |  
37. Rajesh, S., B.V. Ramnath, C. Elanchezhian, M. Abhijith, R.D. Riju and K.K. Kishan, 2018. Investigation of tensile behavior of kevlar composite. Mater. Today Proc., 5: 1156-1161.
    CrossRef  |  Direct Link  |  
38. Rajesh, S., B.V. Ramnath, C. Elanchezhian, A. Chowdhury, A. Sathya and K.R. Deepak, 2018. Review on testing of polymer fasteners. Mater. Today Proc., 5: 1817-1823.
    CrossRef  |  Direct Link  |  
39. Parswajinan, C., B.V. Ramnath, S. Kuralamudhan, S. Balaji and N.S. Prasadh, 2018. Mechanical investigation of aluminum hybrid composite reinforced with CNT and aluminum oxide (Al₂O₃). Adv. Sci. Eng. Med., 10: 426-428.
    CrossRef  |  Direct Link  |  
40. Parswajinan, C., B.V. Ramnath, M. Vetrivel, M. Aswin and B.M. Vignesh, 2018. Mechanical behavior of aluminium metal matrix composite. Adv. Sci. Eng. Med., 10: 395-397.
    CrossRef  |  Direct Link  |  
41. Parswajinan, C., B.V. Ramnath, M. Vetrivel, A.R. Ahmed, A.S.M. Buhari, C. Muthukumaaran and I.A. Hilary, 2018. Design and fabrication of impact die for powder metallurgy. Mater. Today Proc., 5: 329-334.
    CrossRef  |  Direct Link  |  
42. Parswajinan, C., B.V. Ramnath, M. Vetrivel, A. Ranjith, B.K. Rohit, S. Vasanth and S. Vignesh, 2018. Determination of mechanical behaviour of Fe-CNT MMC. Mater. Today Proc., 5: 1176-1185.
    CrossRef  |  Direct Link  |  
43. Parswajinan, C., B.V. Ramnath, A.S.A. Buhari, C. Muthukumaaran and A.R. Ahmed, 2018. Investigations of mechanical properties of aluminium matrix composite reinforced with B4C and MWCNT. Adv. Sci. Eng. Med., 10: 460-462.
    CrossRef  |  Direct Link  |  
44. Moorthy, P.S., G.B. Bhaskar, N. Raja, V. Ramnath and S. Gowri, 2018. Mechanical properties and microstructure of glass carbon hybrid composites. Mater. Testing, 60: 1131-1137.
    CrossRef  |  Direct Link  |  
45. Jeykrishnan, J., B.V. Ramnath, N.C. Ram, K. Nikhil, R.N. Babu and D. Naveen, 2018. Investigation on the influence of performance characteristics on machining inconel 625 alloy in electro-discharge machining (EDM). Mater. Today Proc., 5: 20449-20454.
    CrossRef  |  Direct Link  |  
46. Elanchezhian, C., B.V. Ramnath, K.S. Raghavendra, M. Muralidharan and G. Rekha, 2018. Design and comparison of the strength and efficiency of drive shaft made of steel and composite materials. Mater. Today Proc., 5: 1000-1007.
    CrossRef  |  Direct Link  |  
47. Elanchezhian, C., B.V. Ramnath, G. Ramakrishnan, M. Rajendrakumar, V. Naveenkumar and M.K. Saravanakumar, 2018. Review on mechanical properties of natural fiber composites. Mater. Today: Proc., 5: 1785-1790.
    CrossRef  |  Direct Link  |  
48. Elanchezhian, C., B.V. Ramnath, G. Ramakrishnan, K.S. Raghavendra, M. Muralidharan and V. Kishore, 2018. Review on metal matrix composites for marine applications. Mater. Today Proc., 5: 1211-1218.
    CrossRef  |  Direct Link  |  
49. Srimurugan, R., B. and C. Elanchezhian, 2017. An investigation on mechanical behaviour of nylon 6-polycarbonate hybrid composite. Int. J. Mech. Prod. Eng. Res. Dev., 8: 525-532.
50. Sathish, P., R. Kesavan, B.V. Ramnath and C. Vishal, 2017. Effect of fiber orientation and stacking sequence on mechanical and thermal characteristics of banana-kenaf hybrid epoxy composite. Silicon, 9: 577-585.
    Direct Link  |  
51. Ramnath, B.V., S. Sharavanan and J. Jeykrishnan, 2017. Optimization of process parameters in drilling of fibre hybrid composite using Taguchi and grey relational analysis. IOP Conf. Ser. Mater. Sci. Eng., Vol. 183. .
    Direct Link  |  
52. Ramnath, B.V., J. Jeykrishnan, C. Elanchezhian, D. Keshavan and M. Deepak, 2017. Investigation of shear behaviour of polymer composite golf shaft. Mater. Today Proc., 4: 9218-9223.
    CrossRef  |  Direct Link  |  
53. Ramnath, B.V., J. Jeykrishnan, C. Elanchezhian, A. Kumar and A. Narayan, 2017. Investigation of flexural behaviour of polymer composite golf shaft. Mater. Today Proc., 4: 9341-9345.
    CrossRef  |  Direct Link  |  
54. Ramnath, B.V., C. Elanchezhian, M. Deepak and A. Narayan, 2017. Investigation of torsional behavior of polymer composite golf shaft. Mater. Today Proc., 4: 3342-3345.
    CrossRef  |  Direct Link  |  
55. Ramnath, B.V., C. Elanchezhian, D. Keshavan and K.A. Kumar, 2017. Prediction of tensile behavior of polymer composite golf shaft. Mater. Today Proc., 4: 3356-3360.
    CrossRef  |  Direct Link  |  
56. Ramakrishnan, G., B.V. Ramnath, E. Naveen, S. Gowtham, A.A. Kumar, M.S. Muthuvel and R. Akil, 2017. A review on aluminium metal matrix composites. Adv. Sci. Eng. Med., 10: 1-4.
57. Naveen, E., B.V. Ramnath, C. Elanchezhian and S.M. Nazirudeen, 2017. Influence of organic corrosion inhibitors on pickling corrosion behaviour of sinter-forged C45 steel and 2% Cu alloyed C45 steel. J. Alloys Compound, 695: 3299-3309.
    CrossRef  |  Direct Link  |  
58. Murali, B., B.V. Ramnath and D. Chandramohan, 2017. Crash test analysis on natural fiber composite materials for head gear. Indian J. Sci. Technol., 10: 1-5.
    Direct Link  |  
59. Kaliappan, R.K., B.V. Ramnath, B. Prasannakumar and V.K. Rao, 2017. A review on natural composites. Adv. Sci. Eng. Med., 10: 1-3.
60. Kaliappan, P., R. Kesavan and B.V. Ramnath, 2017. Investigation on effect of fibre hybridization and orientation on mechanical behaviour of natural fibre epoxy composite. Bull. Mater. Sci., 40: 773-782.
    Direct Link  |  
61. Yuvaraj, G., B.V. Ramnath, G.H. Raagavendiran and R. Karthikraja, 2016. Investigation of flexural and Water absorption Behaviour of epoxy Hybrid composites. Adv. Nat. Applied Sci., 10: 34-40.
62. Tamiloli, N., J. Venkatesan and B.V. Ramnath, 2016. A grey-fuzzy modeling for evaluating surface roughness and material removal rate of coated end milling insert. Measurement, 84: 68-82.
    CrossRef  |  Direct Link  |  
63. Ramnath, G.Y.B.V., A. Abinash, B. Srivasan and R.V. Nair, 2016. Investigation of mechanical behaviour of sisal epoxy hybrid composites. Indian J. Sci. Technol., Vol. 9. 10.17485/ijst/2016/v9i34/101004.
    CrossRef  |  
64. Ramnath, B.V., S. Rajesh, C. Elanchezhian, A.S. Shankar, S.P. Pandian, S. Vickneshwaran and R.S. Rajan, 2016. Investigation on mechanical behaviour of twisted natural fiber hybrid composite fabricated by vacuum assisted compression molding technique. Fibers Polym., 17: 80-87.
    Direct Link  |  
65. Jeykrishnan, J., B.V. Ramnath, X.H. Savariraj, R.D. Prakash, V.D. Rajan and D.D. Kumar, 2016. Investigation on tensile and impact behavior of aluminum base silicon carbide metal matrix composites. Indian J. Sci. Technol., 9: 1-4.
    CrossRef  |  
66. Jeykrishnan, J., B.V. Ramnath, G. Sureshrajan, M.S. Bharath, X.H. Savariraj and S. Akilesh, 2016. Effects of die-sinking electro-discharge machining parameters on surface roughness in Inconel 825 alloy. Indian J. Sci. Technol., 9: 1-5.
    CrossRef  |  
67. Jeykrishnan, J., B.V. Ramnath, A.J. Felix, C.R. Pernesh and S. Kalaiyarasan, 2016. Parameter optimization of Electro-Discharge Machining (EDM) in AISI D2 die steel using Taguchi technique. Indian J. Sci. Technol., 9: 1-4.
    CrossRef  |  
68. Idayan, A., C. Elanchezhian, B.V. Ramnath and J. Krishnakumar, 2016. Effect of deep cryogenic treatment on the dimensional stability of AISI 440c bearing steel. Indian J. Sci. Technol., 9: 1-4.
    Direct Link  |  
69. Venkatraman, K., V.B. Ramnath, R. Sarvesh and C.R. Prasanna, 2015. Selection of manufacturing method using artificial neural network. Applied Mech. Mater., 766: 1201-1206.
    Direct Link  |  
70. Srinivasan, V.S., R.S. Boopathy and V.B. Ramnath, 2015. Investigation of Flexural property of Kenaf–Flax hybrid composite. ARPN J. Eng. Applied Sci., 10: 5560-5563.
71. Srimurugan, R., B.V. Ramnath and N. Manoharan, 2015. Investigation of tensile property of nylon – glass fiber polymer matrix composite. ARPN J. Eng. Applied Sci., 10: 5469-5471.
72. Sathish, P., R. Kesavan and V. Ramnath, 2015. Experimental investigation on flexural property of Abaca and Raffia hybrid composites. ARPN J. Eng. Applied Sci., 10: 5534-5536.
73. Sathish, P., R. Kesavan and B.V. Ramnath, 2015. Experimental investigation on delamination behaviour of abaca based hybrid composites. ARPN J. Eng. Applied Sci., 10: 5548-5550.
74. Ramnath, V.B., V.M. Manickavasagam, C. Elanchezhian, R. Karthick, U. Bharath, M.R.A. Kishore and R. Rahul, 2015. Investigation of tensile and impact behavior of abaca-raffia hybrid composites. APRN J. Eng. Applied Sci., 13: 5577-5580.
    Direct Link  |  
75. Ramnath, V.B., V.M. Manickavasagam, C. Elanchezhian, A.R. Prasad, C. Kavin et al., 2015. Investigation of tensile properties of manila fibre reinforced composite. Applied Mech. Mater., 766: 96-99.
    Direct Link  |  
76. Ramnath, V.B., C. Elanchezhian, C.V. Jayakumar, V.M. Manickavasagam, U.S. Aswin et al., 2015. Investigation of flexural characteristics of flax and abaca hybrid epoxy composites. Applied Mech. Mater., 766: 183-186.
    Direct Link  |  
77. Ramnath, B.V., R. Sharavanan, M. Chandrasekaran, C. Elanchezhian, R. Sathyanarayanan, R.N. Raja and S.J. Kokan, 2015. Experimental determination of mechanical properties of banana jute hybrid composite. Fibers Polym., 16: 164-172.
    CrossRef  |  Direct Link  |  
78. Raman, B.V.R., B.V. Ramnath and N. Manoharan, 2015. Kenaf fibre reinforced composites: A review. ARPN. J. Eng. Appl. Sci., 10: 5483-5485.
    Direct Link  |  
79. Rajesh, S., V.B. Ramnath, C. Elanchezhian, C. Kavin and S. Sathish, 2015. Evaluation of tensile behaviour of gfrp/sic polymer reinforced composites. Applied Mech. Mater., 766: 70-72.
    Direct Link  |  
80. Rajesh, S., B.V. Ramnath, C. Elanchezhian and V. Sudharsanan et al., 2015. Investigation of flexural response of kevlar composites. Indian J. Sci. Technol., 9: 1-9.
81. Parswajinan, C., V.B. Ramnath, M. Vetrivel, C. Elanchezhian and K. Loganathan et al., 2015. Experimental investigation of mechanical and chemical properties of aluminium reinforced with MWCNT. Applied Mech. Mater., 766: 287-292.
    Direct Link  |  
82. Manickavasagam, V.M., V.B. Ramnath, C. Elanchezhian, R. Sundarrajan and S. Vickneshwaran et al., 2015. Evaluation of the double shear and hardness of abaca and flax reinforced polymer composite for automotive applications. Applied Mech. Mater., 766: 85-89.
    Direct Link  |  
83. Manickavasagam, V.M., V.B. Ramnath, C. Elanchezhian, G. Ramakrishnan and S. Sathish et al., 2015. Investigation of tensile behaviour of flax–abaca hybrid epoxy composite. Applied Mech. Mater., 766: 140-143.
    Direct Link  |  
84. Krishnan, P.V., V.B. Ramnath, K. Maran and R. Kesavan, 2015. Wastage reduction through Lean Manufacturing in head lamp casing manufacturing process. Applied Mech. Mater., 766: 1196-1200.
    Direct Link  |  
85. Ghias, A. and V.B. Ramnath, 2015. Investigation of tensile property of Aluminium SiC metal matrix composite. Applied Mech. Mater., 766: 252-256.
    Direct Link  |  
86. Elanchezhian, C., V.B. Ramnath, R. Saisundararam, V. Ramanan and C.S. Siddarth et al., 2015. Investigating the weld strength of AA7075 aluminium alloy for TIG, MIG and FSW welding. Applied Mech. Mater., 766: 727-732.
    Direct Link  |  
87. Elanchezhian, C., B.V. Ramnath, R. Kaosik, T.K. Nellaiappan, K.S. Kumar, P. Kavirajan and M.U. Sughan, 2015. Evaluation of mechanical properties of kenaf based hybrid composite for automotive components replacement. ARPN J. Eng. Applied Sci., 10: 5518-5523.
88. Elanchezhian, C., B.V. Ramnath, M.U. Sughan, V. Suseetharan and V.R. Kumar et al., 2015. Evaluation of mechanical properties of human hair bombyx mori silk fiber reinforced epoxy. based composite. ARPN J. Eng. Applied Sci., 10: 5498-5505.
89. Elanchezhian, C., B.V. Ramnath, K. Pazhanivel, A. Vedhapuri and B. Mano et al., 2015. Comparative study and analysis of friction stir welding with plasma ARC welding. Applied Mech. Mater., 766: 695-700.
    CrossRef  |  Direct Link  |  
90. Venkataraman, K., B.V. Ramnath, V.M. Kumar and C. Elanchezhian, 2014. Application of valve steam mapping for reduction of cycle time in a machining process. Int. J. Proc. Mater. Sci., 6: 1187-1196.
91. Venkataraman, K., B.V. Ramnath, S. Kannapan, L. Vinoth and K.V. Velmurugan, 2014. Comparative analysis of AHP and ANP model for lean production system justification. Applied Mech. Mater., 591: 197-201.
    CrossRef  |  Direct Link  |  
92. Srinivasan, V.S., S.R. Boopathy, D. Sangeetha and B.V. Ramnath, 2014. Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite. Mater. Design, 60: 620-627.
    CrossRef  |  Direct Link  |  
93. Srinivasan, V.S., S.R. Boopathy and B.V. Ramnath, 2014. Investigation on shear behaviour of flax-kenaf hybrid composite. Adv. Mater. Res., 1051: 139-142.
    Direct Link  |  
94. Srinivasan, V.S., S.R. Boopathy and B.V. Ramnath, 2014. Fabrication and evaluation of tensile properties of kenaf-flax hybrid composite. Applied Mech. Mater., 680: 50-53.
    Direct Link  |  
95. Saikeerthi, S.P., B. Vijayaramnath and C. Elanchezhian, 2014. Experimental evaluation of the mechanical properties of aluminium 6061- B_4c-Sic composite. Int. J. Eng. Res., 3: 70-73.
96. Ramnath, B.V., V.S. Kumar, P.V. Nirmal, S. Karthick and G.P. Kumar et al., 2014. Experimental investigation of mechanical behavior of jute-flax based glass fiber reinforced composite. Fibers Polym., 15: 1251-1262.
    CrossRef  |  Direct Link  |  
97. Ramnath, B.V., V.M. Manickavasagam, C. Elanchezhian, C.V. Krishna, S. Karthik and K. Saravanan, 2014. Determination of mechanical properties of intra-layer abaca-jute-glass fiber reinforced composite. Mater. Design, 60: 643-652.
    CrossRef  |  Direct Link  |  
98. Ramnath, B.V., V.M. Manickavasagam, C. Elanchezhian, A.S. Shankar, R. Sundarrajan, S. Vickneshwaran and S.P. Pandian, 2014. Investigation on flexural and impact properties of Abaca and Manila hybrid composite. Adv. Mater. Res., 1051: 102-106.
    Direct Link  |  
99. Ramnath, B.V., V. Chandraseker, S.P. Pandian, R. Sundarrajan and A.S. Shankar et al., 2014. Modelling and analysis of extrusion die and bolt ejector pin. Appl. Mech. Mater., 591: 137-141.
    Direct Link  |  
100. Ramnath, B.V., S. Rajesh, C. Elanchezhian, V. Vignesh, V.V. Rahul, V. Tamilselvan and S.U.S. Narayanan, 2014. Investigation of mechanical behaviour of glass fibre based SiC polymer composites. Int. J. Applied Mech. Mater., 591: 142-145.
101. Ramnath, B.V., K. Venkatraman, S.Venkatram, S. Thomas, M. Maheshwaran and N. Dinesh, 2014. Powered two-wheeler with integrated safety using recurdyn multi-body dynamics. Int. J. Applied Mech. Mater., 591: 193-196.
102. Ramnath, B.V., C.V. Krishna, S. Karthik, K. Saravanan, V.M. Manickavasagam and C. Elanchezhian, 2014. Evaluation of the flexural properties of pineapple reinforced polymer composite for automotive and electrical applications. Adv. Mater. Res., 893: 271-274.
     Direct Link  |  
103. Ramnath, B.V., C.S. Kumar, G.R. Mohamed and K. Venkataraman, 2014. Analysis of occupational safety and health of workers by implementing ergonomic based kitting assembly system. Proc. Eng., 97: 1788-1797.
104. Ramnath, B.V., C. Parswajinan, C. Elanchezhian, S.V. Pragadeesh, P.R. Ramkishore and V. Sabarish, 2014. A review on cnt reinforced aluminium and magnesium matrix composites. Int. J. Applied Mech. Mater., 591: 120-123.
     Direct Link  |  
105. Ramnath, B.V., C. Parswajinan, C. Elanchezhian, S.V. Pragadeesh, C. Kavin, P.R. Ramkishore and V. Sabarish, 2014. Experimental investigation on compression and chemical properties of aluminium nano composite. Applied Mech. Mater., 680: 7-10.
     Direct Link  |  
106. Ramnath, B.V., C. Elanchezhian, V. Chandrasekhar, A.A. Kumar and S.M. Asif et al., 2014. Analysis and optimization of gating system for commutator end bracket. Proc. Mater. Sci., 6: 1312-1328.
     CrossRef  |  Direct Link  |  
107. Ramnath, B.V., C. Elanchezhian, M. Jaivignesh, S. Rajesh, C. Parswajinan and A.S.A. Ghias, 2014. Evaluation of mechanical properties of aluminium alloy-alumina-boron carbide metal matrix composites. Mater. Design, 58: 332-338.
     CrossRef  |  Direct Link  |  
108. Ramnath, B.B.V., V. Chandrasekar, C. Elanchezhian, K. Venkataraman and L.V.S. Bruce, 2014. Value stream evaluation and simulation to improve material flow and productivity. Int. J. Applied Mech. Mater., 612: 89-95.
     Direct Link  |  
109. Parswajinan, C., B.V. Ramnath, C. Elanchezhian, S.V. Pragadeesh, P.R. Ramkishore and V. Sabarish, 2014. Investigation on mechanical properties of nano ferrous composite. Proc. Eng., 97: 513-521.
     Direct Link  |  
110. Manickavasagam, V.M., B.V. Ramnath, C. Elanchezhian, V. Vignesh, V.V. Rahul, S.U.S. Narayanan and V. Tamilselvan, 2014. Investigation on compression and hardness properties of Abaca and Manila hybrid composite. Applied Mech. Mater., 680: 23-26.
     Direct Link  |  
111. Manickavasagam, V.M., B.V. Ramnath, C. Elanchezhian, J. Jenish, S. Jayavel and V. Muthukumar, 2014. Investigation on impact and compression properties of pineapple reinforced polymer composite. Int. J. Applied Mech. Mater., 591: 116-119.
112. Kumar, N.A., C. Elanchezhian and B.V. Ramnath, 2014. Investigation of process parameters of friction stir welded AA7075 aluminium alloys. Int. J. Eng. Res., 1: 148-150.
113. Kumar, K.P., C. Elanchezhian and B. Vijayaramnath, 2014. Estimation of physical, mechanical, morphological and water absorption properties of wood flour filled polypropylene composite. Int. J. Eng. Res., 3: 82-86.
114. Krishnakumar, P., B. Vijayaramanath and C. Elanchezhian, 2014. Fabrication and investigation of mechanical performance of polymer based golf shaft. Int. J. Eng. Res., 1: 87-91.
115. Elanchezhian, C., B.V. Ramnath, K.P. Kumar, S.P. Saikeerthi and M.S. Kumar, 2014. Determination of mechanical properties of notched weft knitted glass fiber in variable thickness composites. Applied Mech. Mater., 591: 124-127.
     CrossRef  |  Direct Link  |  
116. Elanchezhian, C., B.V. Ramnath and J. Hemalatha, 2014. Mechanical behaviour of glass and carbon fibre reinforced composites at varying strain rates and temperature. Int. J. Proc. Mater. Sci., 6: 1405-1418.
117. Chaithanyan, C., T. Panneerselvam, S. Raghuraman and B.V. Ramnath, 2014. Investigation of tensile behavior of sisal and coir reinforced hybrid composites using vinyl ester resin. Int. J. Applied Mech. Mater., 591: 146-149.
118. Bruce, L.V.S., K. Venkataraman and B.V. Ramnath, 2014. Application of analytic network process in lean production system justification. Int. J. Eng. Res., 1: 144-147.
119. Shankar, M.C.G., P.K. Jayashree, R. Shetty, A. Kinia and S.S. Sharma, 2013. Individual and combined effect of reinforcements on stir cast aluminium metal matrix composites-a review. Int. J. Curr. Eng. Technol., 3: 922-934.
     Direct Link  |  
120. Ramnath, B.V., S.J. Kokan, R.N. Raja, R. Sathyanarayanan, C. Elanchezhian, A.R. Prasad and V.M. Manickavasagam, 2013. Evaluation of mechanical properties of abaca-jute-glass fibre reinforced epoxy composite. Mater. Design, 51: 357-366.
     CrossRef  |  Direct Link  |  
121. Ramnath, B.V., S. Srinivasan, R. Sathyanarayan and L. Srivatsan, 2013. MCDM model for selection of optimum machining process. Mater. Sci. Forum, 773-774: 348-354.
122. Ramnath, B.V., R.N. Raja, S.J. Kokan, R.S. Narayanan, S. Rajesh and V.M. Manickavasagam, 2013. Fabrication and testing of Abaca fibre reinforced epoxy composites for automotive applications. Adv. Mater. Res., 718-720: 63-68.
123. Ramnath, B.V., R.N. Raja, S.J. Kokan, R.S. Narayanan, S. Rajesh and C. Elanchezhian, 2013. Properties and performance analysis of woven roving composite laminates for automotive panel board applications. Adv. Mater. Res., 683: 21-24.
124. Ramnath, B.V., C. Vishal and C.P. Jain, 2013. Optimization of product development time through lean manufacturing. Adv. Sci. Lett., 19: 2322-2325.
125. Vaitheeswaran, S., S. Santhosh and B.V. Ramnath, 2012. A software based resource selection process in competitive network environment using ANOVA. Int. J. Comput. Applic., 41: 17-21.
126. Srinivasan, S., R. Sathyanarayan, L. Srivatsan and B.V. Ramnath, 2012. Optimization of tool life using linear regression analysis. Int. Rev. Mech. Eng., 6: 405-410.
127. Shriram, R., M.M.R. Kumar, T.V. Aadhithya and B.V. Ramnath, 2012. Design and development of camless valve train for IC engines. Int. Rev. Mech. Eng., 6: 1044-1049.
128. Ramnath, B.V., M. Jaivignesh, R. Harikrishnan, S. Dwarakesh, J. Narahari and C. Elanchzhian, 2012. Application of reverse engineering in the design of land tiller machinery. Int. Rev. Mech. Eng., 6: 1379-1387.
129. Krishnan, P.V., B.V. Ramnath and M.K. Pillai, 2012. Work-in-process optimization through lean manufacturing. Int. J. Econ. Res., 2: 19-25.
130. Harikrishnan, R., M. Jaivignesh and B.V. Ramnath, 2012. Design and performance analysis of pneumatically controlled riveting machine. Can. J. Mech. Sci. Eng., 3: 90-97.
131. Harikrishnan, R., M. Jaivignesh and B.V. Ramnath, 2012. An experimental investigation of cup sand suspension for automobiles international. J. Res. Rev. Applied Sci., 12: 49-56.
132. Elanchezhian, C., B.V. Ramnath, R.N. Raja, S.J. Kokan and R.S. Narayanan, 2012. Design of a machine to determine coefficient of friction and stiffness of web media. Int. Rev. Mech. Eng., 6: 1515-1520.
133. Ramnath, B.V., C. Elanchezhian and R. Kesavan, 2011. Reverse engineering system for generator engine parts. Int. J. Collaborat. Enterprise, 2: 113-128.
134. Ramnath B.V., C. Elanchezhian and R. Kesavan, 2011. A multi attribute decision making method for selection of optimal assembly line. Manage. Sci. Lett., 11: 65-72.
135. Manjunath, S.P., V.R.R. Bharath and B.V. Ramnath, 2011. Application of MCDM model for assessing suitability of JIT manufacturing system. J. Comput., 3: 17-22.
136. Kumar, R.S. and B.V. Ramnath, 2011. Design and fabrication of 3D syskevis metrisis. Applied Mechanics Mater., 3: 4744-4747.
137. Elanchezhian, C., B.V. Ramnath and R. Kesavan, 2011. Vendor selection using analytical hierarchy process in supply chain management. J. Eng. Res. Stud., 1: 118-127.
138. Ramnath, B.V., R. Kesavan and C. Elanchezhian, 2010. Selection of optimal assembly method using multi-dimensions decision making model. J. Comput., 2: 68-73.
139. Ramnath, B.V., C. Elanchezhian and R. Kesavan, 2010. Value stream mapping-A tool for implementing lean manufacturing for a engine assembly line. Impact J. Sci. Technol., 4: 1-10.
140. Ramnath, B.V., C. Elanchezhian and R. Kesavan, 2010. Suitability assessment of lean kitting assembly through fuzzy based simulation model. Int. J. Comput. Applic., 4: 25-31.
141. Ramnath, B.V., C. Elanchezhian and R. Kesavan, 2010. Optimal batch size model for a constrained changeover time. Int. J. Recent Trends Eng. Technol., 3: 33-36.
142. Ramnath, B.V., C. Elanchezhian and R. Kesavan, 2010. Application of integer programming model for optimization design facility using lean manufacturing (A case study). Int. J. Reliab. Qual. Operat. Manage., 1: 95-107.
143. Ramnath, B.V., C. Elanchezhian and R. Kesavan, 2010. Application of analytical hierarchy process to select lean-kitting assembly for an engine assembly. AIMS Int. J. Manage., 4: 119-133.
144. Ramnath, B.V. and V.R.R. Bharath, 2010. Suitability assessment of TPM through fuzzy based simulation model. Proc. Int. Joint J. Confer. Eng. Technol., 2: 258-262.
     Direct Link  |  
145. Elanchezhian, C., B.V. Ramnath and R. Kesavan, 2010. Vendor evaluation using multi criteria decision making. Int. J. Comput. Applic., 5: 4-9.
146. Ramnath, B.V., C. Elanchezhian and R. Kesavan, 2009. A group decision making AHP model for optimizing assembly system through lean manufacturing. Int. J. Manage. Res. Technol., 3: 239-250.