1. Yusuf, M., A.S. Farooqi, M.A. Alam, L.K. Keong, K. Hellgardt and B. Abdullah, 2022. Response surface optimization of syngas production from greenhouse gases via DRM over high performance Ni-W catalyst. Int. J. Hydrogen Energy, 47: 31058-31071.
   CrossRef  |  Direct Link  |  
2. Qureshi, F., M. Yusuf, H. Kamyab, S. Zaidi and M.J. Khalil et al., 2022. Current trends in hydrogen production, storage and applications in India: A review. Sustainable Energy Technol. Assess., Vol. 53. 10.1016/j.seta.2022.102677.
   CrossRef  |  Direct Link  |  
3. Masood, F., N.B.M. Nor, P. Nallagownden, I. Elamvazuthi and R. Saidur et al., 2022. A review of recent developments and applications of compound parabolic concentrator-based hybrid solar photovoltaic/thermal collectors. Sustainability, Vol. 14. 10.3390/su14095529.
   CrossRef  |  Direct Link  |  
4. Khan, R., H.H. Ya, I. Shah, U.M. Niazi and B.A. Ahmed et al., 2022. Influence of elbow angle on erosion-corrosion of 1018 steel for gas-liquid-solid three phase flow. Materials, Vol. 15. 10.3390/ma15103721.
   CrossRef  |  Direct Link  |  
5. Azeem, M., H.H. Ya, M.A. Alam, M. Kumar and P. Stabla et al., 2022. Application of filament winding technology in composite pressure vessels and challenges: A review. J. Energy Storage, Vol. 49. 10.1016/j.est.2021.103468.
   CrossRef  |  Direct Link  |  
6. Alam, M.A., H.H. Ya, M. Azeem, M. Yusuf and I.A. Soomro et al., 2022. Artificial neural network modeling to predict the effect of milling time and TiC content on the crystallite size and lattice strain of Al7075-TiC composites fabricated by powder metallurgy. Crystals, Vol. 12. 10.3390/cryst12030372.
   CrossRef  |  Direct Link  |  
7. Alam, M.A., H.H. Ya, A. Ahmad, M. Yusuf, M. Azeem and F. Masood., 2022. Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. Mater. Today: Proc., 48: 811-814.
   CrossRef  |  Direct Link  |  
8. Yusuf, M., A.S. Farooqi, Y.X. Ying, L.K. Keong, M.A. Alam, K. Hellgardt and B. Abdullah, 2021. Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming. Materialwiss. Werkstofftech., 52: 1090-1100.
   CrossRef  |  Direct Link  |  
9. Yusuf, M., A.S. Farooqi, A.A. Al-Kahtani, M. Ubaidullah and M.A. Alam et al., 2021. Syngas production from greenhouse gases using Ni-W bimetallic catalyst via dry methane reforming: Effect of W addition. Int. J. Hydrogen Energy, 46: 27044-27061.
   CrossRef  |  Direct Link  |  
10. Shozib, I.A., A. Ahmad, M.S.A. Rahaman, A.M. Abdul-Rani, M.A. Alam, M. Beheshti and I. Taufiqurrahman, 2021. Modelling and optimization of microhardness of electroless Ni-P-TiO₂ composite coating based on machine learning approaches and RSM. J. Mater. Res. Technol., 12: 1010-1025.
    CrossRef  |  Direct Link  |  
11. Sattar, M., A.R. Othman, M. Akhtar, S. Kamaruddin and R. Khan et al., 2021. Curve fitting for damage evolution through regression analysis for the kachanov-rabotnov model to the Norton-bailey creep law of SS-316 material. Materials, Vol. 14. 10.3390/ma14195518.
    CrossRef  |  Direct Link  |  
12. Masood, F., P. Nallagownden, I. Elamvazuthi, J. Akhter and M.A. Alam, 2021. A new approach for design optimization and parametric analysis of symmetric compound parabolic concentrator for photovoltaic applications. Sustainability, Vol. 13. 10.3390/su13094606.
    CrossRef  |  Direct Link  |  
13. Masood, F., N.B.M. Nor, P. Nallagownden, I. Elamvazuthi and M.A. Alam et al., 2021. Dataset on the effect of receiver size and acceptance half-angle on the aperture width and height of compound parabolic concentrator for low-concentrating photovoltaic applications using RSM. Data Brief, Vol. 39. 10.1016/j.dib.2021.107630.
    CrossRef  |  Direct Link  |  
14. Azeem, M., H.H. Ya, M.A. Alam, T.H. Sultan and M. Ali et al., 2021. Macroscale assessment of low-velocity impact on hybrid composite laminates. Materialwiss. Werkstofftech., 52: 1101-1111.
    CrossRef  |  Direct Link  |  
15. Alam, M.A., M.H. Asoushe, P. Pourhakkak, L. Gritsch, A. Alipour and S. Mohammadi, 2021. Preparation of bioactive polymer-based composite by different techniques and application in tissue engineering: A review. J. Composites Compd., 3: 194-205.
    CrossRef  |  Direct Link  |  
16. Alam, M.A., H.H. Ya, M. Yusuf, R. Sivraj and O.B. Mamat et al., 2021. Modeling, optimization and performance evaluation of TiC/graphite reinforced Al 7075 hybrid composites using response surface methodology. Materials, Vol. 14. 10.3390/ma14164703.
    CrossRef  |  Direct Link  |  
17. Alam, M.A., H.H. Ya, M. Azeem, M. Yusuf, S.M. Sapuan and F. Masood, 2021. Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites. Materialwiss. Werkstofftech., 52: 1112-1120.
    CrossRef  |  Direct Link  |  
18. Akhter, J., S.I. Gilani, H.H. Al-Kayiem, M. Mehmood and M. Ali et al., 2021. Experimental investigation of a medium temperature single-phase thermosyphon in an evacuated tube receiver coupled with compound parabolic concentrator. Front. Energy Res., Vol. 9. 10.3389/fenrg.2021.754546.
    CrossRef  |  Direct Link  |  
19. Khan, R., H.H. Ya, W. Pao, M.A.A. Majid and T. Ahmed et al., 2020. Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90° elbow pipe in slug flow. Materials, Vol. 13. 10.3390/ma13204601.
    CrossRef  |  Direct Link  |  
20. Alam, M.A., H.H. Ya, M. Azeem, P.B. Hussain and M.S.B. Salit et al., 2020. Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study. J. Mater. Res. Technol., 9: 14036-14050.
    CrossRef  |  Direct Link  |