1. Vivek, P., R. Saravanan, M. Chandrasekaran and R. Pugazhenthi, 2017. Heuristic for critical machine based a lot streaming for two-stage hybrid production environment. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
   Direct Link  |  
2. Vivek, P., R. Saravanan, M. Chandrasekaran and R. Pugazhenthi, 2017. Critical machine based scheduling-A review. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
   Direct Link  |  
3. Venugopal, S., M. Chandrasekaran, V. Muthuraman and S. Sathish, 2017. Computational fluid dynamics analysis of nozzle in abrasive water jet machining. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
   Direct Link  |  
4. Sivaganesan, S., M. Chandrasekaran, S. Ramasubramanian and C. Gnanavel, 2017. The influence of bio additive on the compression ignition engine with diesel and Jatropha methyl ester biodiesel. Int. J. Ambient Energy, 10.1080/01430750.2017.1303643.
   CrossRef  |  Direct Link  |  
5. Sathish, S., M. Chandrasekaran and A. Parthiban, 2017. Effect of co-digestion agricultural-industrial residues: Various slurry temperatures. Int. J. Ambient Energy, 10.1080/01430750.2017.1318791.
   CrossRef  |  Direct Link  |  
6. Sathish, S., A. Parthiban, T.V. Kumar and M. Chandrasekaran, 2017. Analysis of biomethanation process from market waste to generate bio energy. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
   Direct Link  |  
7. Pugazhenthi, R., M. Chandrasekaran, R.K. Muthuraman, P. Vivek and A. Parthiban, 2017. A comparative characteristic study of jatropha and cardanol biodiesel blends. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
   Direct Link  |  
8. Parthiban, A., S. Sathish, M. Chandrasekaran and R. Ravikumar, 2017. Optimization of CO₂ laser cutting parameters on Austenitic type Stainless steel sheet. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
   Direct Link  |  
9. Loganathan, K. and C. Manoharan, 2017. Evaluation of performance and emission features of jatropha biodiesel-turpentine blend as green fuel. Thermal Sci., 21: 615-625.
   Direct Link  |  
10. Kumar, T.V., M. Chandrasekaran, V. Santhanam and N. Udayakumar, 2017. Characterization of nylon 6 nano fiber/E-glass fiber reinforced epoxy composites. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
    Direct Link  |  
11. Kumar, T.V., M. Chandrasekaran, V. Santhanam and V.D. Sudharsan, 2017. Effect of coupling agent on mechanical properties of palm petiole nanofiber reinforced composite. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
    Direct Link  |  
12. Karunakaran, K. and M. Chandrasekaran, 2017. Machineability study on die sinking EDM of inconel 800 with electrolyte copper electrode. ARPN J. Eng. Applied Sci., 12: 2407-2411.
    Direct Link  |  
13. Karunakaran, K. and M. Chandrasekaran, 2017. Investigation of machine-ability of inconel 800 in EDM with coated electrode. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
    Direct Link  |  
14. Karunakaran, K. and M. Chandrasekaran, 2017. Influence of process parameters in n-PMEDM of inconel 800 with electrode and coated electrodes. MATEC Web Conf., Vol. 95. 10.1051/matecconf/Mar20179502002.
    CrossRef  |  
15. Karunakaran, K. and M. Chandrasekaran, 2017. Experimental investigation Nano particles influence in NPMEDM to Machine Inconel 800 with electrolyte copper electrode. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 197. .
    Direct Link  |  
16. Karikalan, L. and M. Chandrasekaran, 2017. Performance and pollutants analysis on diesel engine using blends of jatropha biodiesel and mineral turpentine as fuel. Int. J. Environ. Sci. Technol., 14: 323-330.
    CrossRef  |  Direct Link  |  
17. Jayakanth, J.J., S. Ramasubramanian, M. Chandrasekaran and S. Manavalan, 2017. Investigation of solar water heater by using flat plate collector and evacuated tubes. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
    Direct Link  |  
18. Gopal, P., V.K.B. Raja, M. Chandrasekaran and C. Dhanasekaran, 2017. Woven hybrid composites-tensile and flexural properties of jute mat fibres with epoxy composites. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
    Direct Link  |  
19. Gobinath, S. and M. Chandrasekaran, 2017. AIS-SFHM approach for optimization of multi objective job shop problems. J. Adv. Chem., 13: 6363-6368.
20. Gnanavel, C., R. Saravanan, M. Chandrasekaran and J.J. Jayakanth, 2017. Improvement of productivity in TIG welding plant by equipment design in orbit. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 183. .
    Direct Link  |  
21. Vivek, P., R. Saravanan, M. Chandrasekaran and R. Pugazhenthi, 2016. Minimizing idle time of critical machine in permutation flow environment with weighted scheduling. ARPN J. Eng. Applied Sci., 11: 3473-3483.
    Direct Link  |  
22. Sridhar, R., M. Chandrasekaran and T. Page, 2016. Multi objective optimization of heterogeneous bin packaging using adaptive genetic approach. Indian J. Sci. Technol., Vol. 9. 10.17485/ijst/2016/v9i47/108484.
    CrossRef  |  Direct Link  |  
23. Sivaganesan, S., A. Mahavishnu and M. Chandrasekaran, 2016. Effects of additives in a single cylinder Ci engine fuelled with blends of bio diesel. Int. J. Chem. Sci., 14: 643-654.
    Direct Link  |  
24. Sivaganesan, S. and M. Chandrasekaran, 2016. The influence of bio additive on the compression ignition engine with diesel and mahua methyl ester biodiesel. Int. J. Chem. Sci., 14: 3097-3106.
    Direct Link  |  
25. Sivaganesan, S. and M. Chandrasekaran, 2016. Performance and emission of a single cylinder Di diesel engine operating on various Parameters using diestrol at efi system. Int. J. Chem. Sci., 14: 549-559.
26. Sivaganesan, S. and M. Chandrasekaran, 2016. Performance and emission analysis of compression ignition engine with methyl ester of jatropha and diesel. Indian J. Sci. Technol., Vol. 9. 10.17485/ijst/2016/v9i26/94598.
    CrossRef  |  Direct Link  |  
27. Sivaganesan, S. and M. Chandrasekaran, 2016. Impact of various compression ratio on the compression ignition engine with diesel and mahua biodiesel. Int. J. ChemTech Res., 9: 63-70.
28. Sivaganesan, S. and M. Chandrasekaran, 2016. Experimental investigation of a diesel engine fuelled with blends of methyl ester of mahua oil and diesel. Eur. J. Sci. Res., 140: 69-77.
29. Roy, B.D., R. Saravanan, R. Pugazhenthi and M. Chandrasekaran, 2016. Experimental investigation of turbocharger mapped by data-logger in IC engine. ARPN J. Eng. Applied Sci., 11: 4587-4595.
    Direct Link  |  
30. Rajasekaran, K.G., S. Murali and M. Chandrasekaran, 2016. Identification and Prioritisation of supplier, customer and Organization collaborating factors influencing New product development. Indian J. Applied Res., 6: 535-547.
31. Rajasekaran, K.G., M. Chandrasekaran and S. Murali, 2016. A review on employing multi criteria decision making methods for supplier selection. Asian J. Res. Soc. Sci. Hum., 6: 802-810.
32. Rajasekaran, K.G., G.B. Bhaskar, M. Chandrasekaran and S. Murali, 2016. An empirical study on selection of supply chain partner by multi-criteria decision making method VIKOR-A case of automotive industry. Int. J. Eng. Technol., 8: 2997-3004.
    Direct Link  |  
33. Karunakaran, K. and M. Chandrasekaran, 2016. Investigation of influence of some process parameters in EDM of inconel-800 with sliver coated electrode. ARPN J. Eng. Applied Sci., 11: 13945-13953.
34. Karunakaran, K. and M. Chandrasekaran, 2016. Influence of process parameters in n-PMEDM of inconel 800 with electrode and coated electrodes. MATEC Web Conf., Vol. 95. 10.1051/matecconf/20179502002.
    CrossRef  |  Direct Link  |  
35. Karunakaran, K. and M. Chandrasekaran, 2016. Experimental investigation of process parameters influence on machining Inconel 800 in the electrical spark eroding machine. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 157. 10.1088/1757-899X/157/1/012007.
    CrossRef  |  
36. Karunakaran, K. and M. Chandrasekaran, 2016. Experimental investigation of nano powders influence in NPMEDM of inconel 800 with silver coated electrolytic copper electrode. Indian J. Sci. Technol., Vol. 9. 10.17485/ijst/2016/v9i43/103315.
    CrossRef  |  
37. Karikalan, L. and M. Chandrasekaran, 2016. Waste cooking oil (WCO): An imperious substitute fuel for DI diesel engines. Int. J. Chem. Sci., 14: 161-172.
    Direct Link  |  
38. Karikalan, L. and M. Chandrasekaran, 2016. Influence of turpentine addition in jatropha biodiesel on CI engine performance, combustion and exhaust emissions. Int. J. Automotive Technol., 17: 697-702.
    CrossRef  |  Direct Link  |  
39. Jeevahan, J., M. Chandrasekaran, G. Mageshwaran, G.B. Joseph and S. Staline, 2016. Investigation of engine performance and emissions of B20 biodiesel blend and effect of EGR on NOx emissions reduction. J. Chem. Pharm. Sci., 9: 2469-2473.
    Direct Link  |  
40. Jeevahan, J., M. Chandrasekaran, G. Mageshwaran and G.B. Joseph, 2016. Analysis of the effect of geometry of vortex tube on cold side and hot side air stream temperatures. J. Chem. Pharm. Sci., 9: 2474-2477.
    Direct Link  |  
41. Jayakanth, J.J., M. Jeyaraman, S. Sivaganesan and M. Chandrasekaran, 2016. Design and analysis of commercial vehicle leaf spring using AISI1008 carbon steel composite material. APRN J. Eng. Applied Sci., 11: 10387-10391.
    Direct Link  |  
42. Winne, S.J. and M. Chandrasekaran, 2015. Optimization of nozzle: Convergence using ANSYS with RSM, MGA. ARPN J. Eng. Applied Sci., 10: 5486-5489.
43. Udaiyakumar, K.C. and M. Chandrasekaran, 2015. An evolutionary algorithm applied for optimization of single objective (makespan minimization) job shop scheduling problems. Int. J. Sci. Eng. Res., 6: 143-146.
    Direct Link  |  
44. Udaiyakumar, K.C. and M. Chandrasekaran, 2015. An approach of a Lampyridae family (firefly) algorithm for optimisation of Bagchi's job shop scheduling problems. Int. J. Enterprise Network Manage., 6: 324-339.
    CrossRef  |  Direct Link  |  
45. Sivaganesan, S. and M. Chandrasekaran, 2015. The influence of thermal barrier coating on the combustion and exhaust emission in turpentine oil powered DI diesel engine. ARPN J. Eng. Applied Sci., 10: 10548-10554.
    Direct Link  |  
46. Ramnath, B.V., R. Sharavanan, M. Chandrasekaran, C. Elanchezhian, R. Sathyanarayanan, R.N. Raja and S.J. Kokan, 2015. Experimental determination of mechanical properties of banana jute hybrid composite. Fibers Polym., 16: 164-172.
    CrossRef  |  Direct Link  |  
47. Malligarjunan, S. and M. Chandrasekaran, 2015. Diverse approaches in minimizing the build time for different rapid prototyping processes. ARPN J. Eng. Applied Sci., 10: 5028-5033.
48. Karikalan, L. and M. Chandrasekaran, 2015. Karanja oil biodiesel: A potential substitution for diesel fuel in diesel engine without alteration. ARPN J. Eng. Applied Sci., 10: 152-163.
49. Karikalan, L. and M. Chandrasekaran, 2015. Effect of varying fuel injection pressure of Selective Vegetable oil biodiesel on CI engine performance and pollutants. Int. J. ChemTech Res., 8: 312-318.
50. Gopinath, S., C. Arumugam, T. Page and M. Chandrasekaran, 2015. Solving multi objective job shop scheduling problems using artificial immune system shifting bottleneck approach. Applied Mech. Mater., 766-767: 1209-1213.
    Direct Link  |  
51. Chandrasekaran, M., S. Padmanabhan and V.S. Raman, 2015. Swarm intelligence optimization of worm and worm wheel design. ARPN J. Eng. Applied Sci., 10: 5524-5528.
52. Chandrasekaran, M., S. Padmanabhan and V.S. Raman, 2015. Single speed gear optimization using genetic algorithm. ARPN J. Eng. Applied Sci., 10: 5506-5511.
53. Chandrasekaran, M., D. Lakshmipathy and P. Sriramya, 2015. GT heuristic for solving multi objective job shop scheduling problems. ARPN J. Eng. Applied Sci., 10: 5472-5477.
54. Chandrasekaran, M. and D. Lakshmipathy, 2015. Material requirement planning and job shop scheduling: An integrated framework. Int. J. Applied Eng. Res., 10: 13876-13883.
55. Chandrasekaran, M. and D. Lakshmipathy, 2015. Application of artificial immune system algorithm to minimize total holding cost of completed and in-process products subject with no tardy jobs. Int. J. Applied Eng. Res., 10: 13817-13826.
56. Arulmozhi, P. and M. Chandrasekaran, 2015. Design optimization of helical gear using sheep flocks heredity model algorithm. ARPN J. Eng. Applied Sci., 10: 3465-3467.
57. Udaiyakumar, K.C. and M. Chandrasekaran, 2014. Optimization of multi objective Job Shop Scheduling problems using Firefly algorithm. Applied Mech. Mater., 591: 157-162.
    CrossRef  |  Direct Link  |  
58. Udaiyakumar, K.C. and M. Chandrasekaran, 2014. Application of firefly algorithm in job shop scheduling problem for minimization of makespan. Procedia Eng., 97: 1798-1807.
    CrossRef  |  Direct Link  |  
59. Udaiyakumar, K.C. and M. Chandrasekaran, 2014. A nature inspired firefly heuristic approach on optimization of multi objective job shop scheduling problems. Int. J. Mech. Prod. Eng., 2: 71-74.
60. Udaiyakumar, K.C. and M. Chandrasekaran, 2014. A nature inspired bee colony heuristic used to optimize single objective (Makespan) of job shop scheduling problem. Int. J. Applied Environ. Sci., 9: 2223-2232.
61. Udaiyakumar, K.C. and M. Chandrasekaran, 2014. A heuristic genetic approach applied to lawrence problems of job shop scheduling for minimization of Makespan. Indian J. Eng., 11: 41-46.
62. Shanmugavel, P., M. Chandrasekaran and G.B. Bhaskar, 2014. Determination of stress intensity factors and fatigue characteristics of Al-SiC composite material and Al-SiC functionally graded material by simulation. Int. Rev. Mech. Eng., 8: 1017-1029.
    Direct Link  |  
63. Shanmugavel, P., G.B. Bhaskar, M. Chandrasekaran and S.P. Srinivasan, 2014. Determination of stress intensity factors and fatigue characteristics for aluminium, aluminium-alumina composite material and aluminium-alumina FGM specimens with edge crack by simulation. Int. J. Applied Environ. Sci., 9: 1759-1768.
64. Shanmugavel, P., G.B. Bhaskar and M. Chandrasekaran, 2014. Experimental study on fatigue characteristics for aluminium and Al-SiC composite material edge crack specimens under flexural loading conditions. Int. J. Eng. Technol., 6: 13-27.
65. Santhanam, V., M. Chandrasekaran and N. Venkateshwaran, 2014. Effect of fiber parameters on the mechanical properties of banana-glass fiber hybrid composites. Applied Mech. Mater., 592: 202-205.
    CrossRef  |  Direct Link  |  
66. Santhanam, V. and M. Chandrasekaran, 2014. Studies of fracture toughness of Banana-Glass fibre hybrid composite. Indian J. Eng., 11: 21-29.
67. Santhanam, V. and M. Chandrasekaran, 2014. Effect of surface treatment on the mechanical properties of banana-glass fibre hybrid composites. Applied Mech. Mater., 591: 7-10.
    CrossRef  |  Direct Link  |  
68. Santhanam, V. and M. Chandrasekaran, 2014. A study on drilling behavior of banana-glass fibre reinforced epoxy composite. Indian J Applied Res., 4: 48-53.
69. Ramya, G. and M. Chandrasekaran, 2014. Shuffled frog leaping algorithm approach for employee timetabling and job shop scheduling. Int. J. Internet Manuf. Serv., 3: 178-203.
70. Padmanabhan, S., V.S. Raman and M. Chandrasekaran, 2014. Optimisation of gear reducer using evolutionary algorithm. Mater. Res. Innov., 18: 378-383.
    CrossRef  |  Direct Link  |  
71. Padmanabhan, S., M. Chandrasekaran, J. JeswinArputhabalan and B. Balaji, 2014. A novel evolutionary algorithm for engineering design optimization. IOSR J. Mech. Civil Eng., 1: 6-10.
    Direct Link  |  
72. Padmanabhan, S. and M. Chandrasekaran, 2014. Optimization of gear drive using genetic algorithm. Multi Disciplinary J. Pensee, 76: 46-49.
73. Karthikeyan, S., P. Asokan and M. Chandrasekaran, 2014. A hybrid discrete firefly algorithm for multi-objective flexible job shop scheduling problems with maintenance activity. Applied Mech. Mater., 575: 922-925.
    CrossRef  |  Direct Link  |  
74. Karikalan, L., M. Chandrasekaran and K. Sudhagar, 2014. A review on waste cooking oil (WCO) based biodiesel and its combustion, performance and emission characteristics. Int. J. Pollut. Res., 33: 99-107.
75. Gobinath, S., C. Arumugam, G. Ramya and M. Chandrasekaran, 2014. Optimization of total holding cost in job shop scheduling by using hybrid algorithm. Applied Mech. Mater., 591: 176-179.
    CrossRef  |  Direct Link  |  
76. Chandrasekaran, M., P. Sriramya, B. Parvathavarthini and M. Saravanamanikandan, 2014. Computational complexity analysis of selective breeding algorithm. Applied Mech. Mater., 591: 172-175.
    CrossRef  |  Direct Link  |  
77. Arulmozhi, P., M. Chandrasekaran and S. Padmanabhan, 2014. Multi objective optimization for spur gear design using sheep flocks heredity model algorithm. Applied Mech. Mater., 591: 68-71.
    CrossRef  |  Direct Link  |  
78. Udaiyakumar, K.C. and M. Chandrasekaran, 2013. Tabu search algorithm for solving of job shop scheduling with single objective-makespan minimization. Indian J. Applied Res., 3: 365-367.
79. Sriramya, P., B. Parvathavarthini and M. Chandrasekaran, 2013. Solving scheduling problems using selective breeding algorithm and hybrid algorithm. Indian J. Comput. Sci. Eng., 2: 86-90.
    Direct Link  |  
80. Santhanam, V., M. Chandrasekaran, N. Venkateshwaran and A. Elayaperumal, 2013. Mode I fracture toughness of banana fiber and glass fiber reinforced composites. Adv. Mater. Res., 622-623: 1320-1324.
    CrossRef  |  Direct Link  |  
81. Ramya, G. and M. Chandrasekaran, 2013. Solving job shop scheduling problem based on employee availability constraint. Applied Mech. Mater., 376: 197-206.
    CrossRef  |  Direct Link  |  
82. Ramya, G. and M. Chandrasekaran, 2013. Shuffled frog leaping algorithm for minimizing total holding cost with tardy jobs in job shop scheduling. J. Curr. Eng. Res., 3: 17-24.
83. Ramya, G. and M. Chandrasekaran, 2013. An efficient heuristics for minimizing total holding cost with no tardy jobs in job shop scheduling. Int. J. Comput. Commun. Eng., 2: 216-218.
    Direct Link  |  
84. Padmanabhan, S., M. Chandrasekaran, P. Asokan and V.S. Raman, 2013. Optimal solution for gear drive design using population based algorithm. Int. Rev. Mech. Eng., 7: 802-806.
    Direct Link  |  
85. Padmanabhan, S., M. Chandrasekaran, P. Asokan and V.S. Raman, 2013. A performance study of real coded genetic algorithm on gear design optimization. Adv. Mater. Res., 622-623: 64-68.
    CrossRef  |  Direct Link  |  
86. Padmanabhan, S., M. Chandrasekaran and V.S. Raman, 2013. Design optimization of worm gear drive. Int. J. Mining Metallurgy Mechan. Eng., 1: 57-61.
87. Padmanabhan, S. and M. Chandrasekaran, 2013. Worm gear drive optimization using modified artificial immune algorithm. J. Curr. Eng. Res., 3: 48-51.
88. Padmanabhan, S. and M. Chandrasekaran, 2013. A modified artificial immune system for optimization of gear reducer. J. Emerging Technol. Mech. Sci. Eng., 1: 75-78.
89. Karikalan, L., M. Chandrasekaran and K. Sudhagar, 2013. Comparative studies on vegetable oil usage in C.I. engines as an alternative to diesel fuel. Int. Rev. Mech. Eng., 7: 705-715.
90. Karikalan, L. and M. Chandrasekaran, 2013. Investigation on emission characteristics of C.I engine using vegetable oil with SCR technique. Int. J. Renew. Energy Res., 3: 969-975.
    Direct Link  |  
91. Gobinath, S., C. Arumugam and M. Chandrasekaran, 2013. A hybrid approach for single objective job shop scheduling problems. Life Sci. J., 10: 163-166.
92. Shanmugavel, P., G.B. Bhaskar, M. Chandrasekaran, P.S. Mani and S.P. Srinivasan, 2012. An overview of fracture analysis in functionally graded materials. Eur. J. Sci. Res., 68: 412-439.
93. Ramya, G. and M. Chandrasekaran, 2012. Heuristics algorithms for solving job shop scheduling-an overview. Nat. J. Build. Mater. Sci., 3: 23-37.
94. Ramya, G. and M. Chandrasekaran, 2012. Development of optimized integrated system between job shop scheduling and production functional areas. Int. J. Prod. Technol. Manuf. Res., 3: 125-133.
95. Ramya, G. and M. Chandrasekaran, 2012. An integration of manufacturing resource planning and job shop scheduling. Int. J. Design Manuf. Technol., 6: 29-45.
96. Padmanabhan, S., M. Chandrasekaran, P. Asokan and V.S. Raman, 2012. Design optimization of two stage gear box using Selective Breeding algorithm. Int. J. Design Manuf. Technol., 6: 9-16.
97. Padmanabhan, S. and M. Chandrasekaran, 2012. Evaluation of the performance of ant colony optimization over particle swarm optimization. Int. J. Comput. Applic., 38: 12-18.
    Direct Link  |  
98. Gopinath, S., C. Arumugam and M. Chandrasekaran, 2012. A hybrid approach for solving multi objective job shop scheduling problems. Eur. J. Scient. Res., 88: 146-154.
99. Babu, M.N., N. Muthukrishnan and M. Chandrasekaran, 2012. Estimation of optimal process parameters in abrasive waterjet machining of aisi 202 using grey relational analysis and simulated annealing. Wulfenia J., 19: 408-425.
100. Padmanabhan, S. and M. Chandrasekaran, 2011. Multi objective optimization of bevel gear design using real coded genetic algorithm. Nat. J. Build. Mater. Sci., 2: 22-30.
101. Padmanabhan, S. and M. Chandrasekaran, 2011. Design optimization of helical gear pair using population based swarm intelligence techniques. Int. J. Prod. Technol. Manuf. Res., 2: 87-94.
102. Udayakumar, K.C., M. Chandrasekaran and P. Asokan, 2010. Solving multi objective job shop scheduling problems with SBA Algorithm. Int. J. Prod. Technol. Manage. Res., 1: 53-57.
103. Srinivasan, S.P., P. Malliga and M. Chandrasekaran, 2010. An optimal line balancing for a multiple assembly system of a batch production unit. Int. J. Mater. Manuf. Operations, 1: 27-33.
104. Srinivasan, S.P., P. Malliga and M. Chandrasekaran, 2010. A 3PL supply chain network of Jatropha oil for the production of Biodiesel in India. Int. J. Prod. Technol. Manage. Res., 1: 43-47.
105. Padmanabhan, S., M. Chandrasekaran and V.S. Raman, 2010. Optimization of worm and worm wheel design using metaheuristic algorithms. IETECH J. Mech. Design, 4: 43-47.
106. Chandrasekaran, M., S.P. Srinivasan and P. Malliga, 2010. An assembly line balancing for batch production system. Int. J. Materials Manuf. Operations Int. Sci. Press, 1: 27-33.
107. Chandrasekaran, M., P. Asokan, P. Pandiyaraj and R. Giri, 2010. Optimization of total holding cost with no tardy jobs in Job shop scheduling. Int. J. Manuf. Sci. Technol., 10: 5-18.
108. Chandrasekaran, M., P. Asokan, P. Pandiyaraj and R. Giri, 2010. Optimization of total holding cost with no tardy jobs in Job shop scheduling. Int. J. Manuf. Sci. Technol., 10: 5-18.
109. Chandrasekaran, M., P. Asokan and K.C. Udayakumar, 2010. Solving multi objective job shop scheduling problems with SBA algorithm. Int. J. Prod. Technol. Manage., 1: 53-57.
110. Chandrasekaran, M. and J.F. Xavier, 2010. Monitoring of grinding monel 400 using acoustic emission. Int. J. Prod. Technol. Manage., 1: 53-57.
111. Xavier, J.F. and M. Chandrasekaran, 2009. Fuzzy C-means clustering approach for optimization of surface grinding process with acoustic emission. J. Manuf. Sci. Prod., 10: 205-212.
     Direct Link  |  
112. Kannan, S. and M. Chandrasekaran, 2009. Optimization of automobile body part to overcome its failure. Manuf. Technol. Today J., 8: 21-25.
113. Chandrasekaran, M. and S. Kannan, 2009. Optimization of automobile body part. Manuf. Technol. Today J., 8: 35-38.
114. Chandrasekaran, M., S. Kannan and P. Pandiaraj, 2008. Quality improvement in automobile assembly production line by using Kaizen. Manuf. Technol. Today, 7: 33-38.
115. Chandrasekaran, M., P. Asokan, S. Kumanan, S. Umamaheswari and C.S.P. Rao, 2008. Multi objective optimization for multi objective job shop scheduling problems. Int. J. Manuf. Sci. Technol., 9: 47-54.
116. Chandrasekaran, M., P. Asokan, S. Kumanan, S. Umamaheswari and C.S.P. Rao, 2008. Multi objective optimization for job shop scheduling problems using sheep flocks heredity model algorithm. Int. J. Manuf. Sci. Technol., 9: 47-54.
117. Chandrasekaran, M., P. Asokan, S. Kumanan and S. Arunachalam, 2008. Application of selective breeding algorithm for solving job shop scheduling problems. Int. J. Manuf. Sci. Technol., 9: 103-118.
118. Chandrasekaran, M. S. Kannan and P. Pandiyaraj, 2008. Quality improvement in automobile assembly production line by using kaizen. Manuf. Technol. Today J., 3: 35-38.
119. Chandrasekaran, M., P. Asokan, S. Kumanan, T. Balamurugan and S. Nickolas, 2006. Solving job shop scheduling problems using artificial immune system. Int. J. Adv. Manuf. Technol., 31: 580-593.
     CrossRef  |  Direct Link  |  
120. Chandrasekaran, M., P. Asokan, S. Kumanan and T. Balamurugan, 2006. Sheep flocks heredity model algorithm for solving job shop scheduling problems. Int. J. Applied Manage. Technol., 4: 79-100.