Dr. Ahmad Azmin Mohamad

Associate Professor
Universiti Sains Malaysia, Malaysia

Highest Degree
Ph.D. in Advanced Materials from University of Malaya, Malaysia

My URL
https://livedna.org/60.14084

Share this Profile

Area of Interest:

Physical Science Engineering
Energy
Alloys
Electrolytes
Material Science

Selected Publications

  1. Yahaya, M.Z., F.C. Ani, Z. Samsudin, S. Sahin, M.Z. Abdullah and A.A. Mohamad, 2016. Hardness profiles of Sn-3.0 Ag-0.5 Cu-TiO2 composite solder by nanoindentation. Mater. Sci. Eng. A, 669: 178-186.
    CrossRef  |  Direct Link  |  

  2. Mohamad, A.A., 2016. Absorbency and conductivity of quasi-solid-state polymer electrolytes for dye- sensitized solar cells: A characterization review. J. Power Sources, 329: 57-71.
    CrossRef  |  Direct Link  |  

  3. Yahaya, M.Z., M.Z. Abdullah and A.A. Mohamad, 2015. Centrifuge and storage precipitation of TiO2 nanoparticles by the sol-gel method. J. Alloys Comp., 651: 557-564.
    CrossRef  |  Direct Link  |  

  4. Nazeri, M.F.M and A.M. Ahmad, 2015. Effect of exposure to alkaline solution on Sn-9Zn solder joints. J. Mater. Process. Technol., 219: 164-172.
    CrossRef  |  Direct Link  |  

  5. Alias, S.S., M.A. Zulkifli and A.M. Ahmad, 2015. Porous membrane based on chitosan�SiO2 for coin cell proton battery. Ceram. Int., 41: 5484-5491.
    CrossRef  |  Direct Link  |  

  6. Alias, N and A.M. Ahmad, 2015. Morphology study of electrodeposited zinc from zinc sulfate solutions as anode for zinc-air and zinc-carbon batteries. J. King Saud Univ. Eng. Sci., 27: 43-48.
    CrossRef  |  Direct Link  |  

  7. Alias, N and A.M. Ahmad, 2015. Advances of aqueous rechargeable lithium-ion battery: A review. J. Power Sources, 274: 237-251.
    CrossRef  |  Direct Link  |  

  8. Affendy, M.G., Z.Y. Muhamad, C.A. Fakhrozi and A.M. Ahmad, 2015. Corrosion measurement on shear strength of Cu/Sn�9Zn/Cu lap joints. Meas., 66: 195-203.
    CrossRef  |  Direct Link  |  

  9. Nazeri, M.F.M., B.I. Ahmad and A.M. Ahmad, 2014. Effect of polarizations on Sn-Zn solders alloys in alkaline electrolyte. J. Alloys Comp., 606: 278-287.
    CrossRef  |  Direct Link  |  

  10. Nazeri, M.F.M and A.A. Mohamad, 2014. Corrosion measurement of Sn-Zn lead-free solders in 6M KOH solution. Meas., 47: 820-826.
    CrossRef  |  Direct Link  |  

  11. Lee, L.M., F.M.N. Muhammad, H. Habsah and A.M. Ahmad, 2014. Corrosion of Sn-3.0Ag-0.5Cu thin films on Cu substrates in alkaline solution. Soldering Surf. Mount Technol., 26: 79-86.
    CrossRef  |  Direct Link  |  

  12. Alias, N and A.M. Ahmad, 2014. Synthesis and electrochemical behavior of LiFePO4/C with an air�electrode in an aqueous lithium ion battery. Ceram. Int., 40: 13089-13096.
    CrossRef  |  Direct Link  |  

  13. Affendy, M.G., Z.Y. Muhamad and A.M. Ahmad, 2014. Corrosion of Sn-9Zn solder Joints: A review. Int. J. Electroactive Mater., 2: 8-16.
    Direct Link  |  

  14. Lee, L.M., H. Haliman and A.A. Mohamad, 2013. Interfacial reaction of a Sn-3.0 Ag-0.5 Cu thin film during solder reflow. Soldering Surf. Mount Technol., 25: 15-23.
    CrossRef  |  Direct Link  |  

  15. Lee, L.M and A.M. Ahmad, 2013. Interfacial reaction of Sn-Ag-Cu Lead-Free solder alloy on Cu: A review. Adv. Mater. Sci. Eng., 10.1155/2013/123697.
    CrossRef  |  Direct Link  |  

  16. Tan, W.C., S.A. Siti, B.I. Ahmad and A.M. Ahmad, 2012. Effect of styrene- acrylonitrile content on 0.5 M NaI/0.05 MI2 liquid electrolyte encapsulation for dye-sensitized solar cells. J. Solid State Electrochem., 16: 2103-2112.
    CrossRef  |  Direct Link  |  

  17. Tan, A.L., L.J. Khoo, S.S. Alias and A.A. Mohamad, 2012. ZnO nanoparticles and poly (acrylic) acid-based polymer gel electrolyte for photo electrochemical cell. J. Sol-Gel Sci. Technol., 64: 184-192.
    CrossRef  |  Direct Link  |  

  18. Ng, P.L., J. Aliyah, A. Yatimah, J.B. Wan, A.A. Zainal and A.M. Ahmad, 2012. Effect of KOH concentration in the gel polymer electrolyte for direct borohydride fuel cell. J. Appl. Polym. Sci., 123: 2662-2666.
    CrossRef  |  Direct Link  |  

  19. Nazeri, M.F.M., S.M.S. Mohd, N.M. Mohamad, A. Nurhaswani and A.M. Ahmad, 2012. Corrosion studies of conductive paint coating using battery cathode waste material in sodium chloride solution. Int. J. Electrochem. Sci., 7: 6976-6987.
    Direct Link  |  

  20. Nazeri, M.F.M., M.S.M. Suan, M.N. Masri, N. Alias, M.W.A. Rashid, Y. Alias and A.A. Mohamad, 2012. Corrosion and heat treatment of paint coating containing battery cathode waste Material-Epoxy resin in 3.5 wt% sodium chloride solution. Int. J. Electrochem. Sci., 7: 9633-9642.
    Direct Link  |  

  21. Nazeri, M.F.M., G.A. Muhammad and A.M. Ahmad, 2012. Corrosion study of Sn-9Zn Lead-Free solder in alkaline solution. Int. J. Electrochem. Sci., 7: 4182-4191.
    Direct Link  |  

  22. Liew, M.C., I. Ahmad, L.M. Lee, M.F.M. Nazeri, H. Haliman and A.A. Mohamad, 2012. Corrosion behavior of Sn-3.0 Ag-0.5 Cu lead-free solder in potassium hydroxide electrolyte. Metall. Mater. Trans. A, 43: 3742-3747.
    CrossRef  |  Direct Link  |  

  23. Koh, J.C.H., A.A. Zainal and A.M. Ahmad, 2012. Bacto agar-based gel polymer electrolyte. Ionics, 18: 359-364.
    CrossRef  |  Direct Link  |  

  24. Ismail, Y.M.B., H. Habsah and A.M. Ahmad, 2012. Hydroponics polymer gels for Zn-MnO2 alkaline batteries. Int. J. Electrochem. Sci., 7: 3555-3566.
    Direct Link  |  

  25. Affendy, M.G and A.M. Ahmad, 2012. Effects of corrosion on the shear strength of Cu/Sn-9Zn/Cu lap joints in 3.5 wt. % NaCl solution. Int. J. Electrochem. Sci., 7: 4951-4958.
    Direct Link  |  

  26. Jeremy C.H. Koh, Zainal Arifin Ahmad, Ahmad Azmin Mohamad, 2011. Self-Aligned TiO2 nanotube arrays produced by air-cathode as electrode. J. Alloys Comp., 509: 8707-8715.
    CrossRef  |  Direct Link  |  

  27. Masri, M.N., Z.M. Yunus, A.R.M. Warikh and A.A. Mohamad, 2010. Electrical conductivity and corrosion protection properties of conductive paint coating Anti-Corros. Meth. Mater., 57: 204-208.
    CrossRef  |  Direct Link  |  

  28. Masri, M.N., M.F.M. Nazeri and A.A. Mohamad, 2010. Sago gel polymer electrolyte for zinc-air battery. Adv. Sci. Technol., 72: 305-308.
    CrossRef  |  Direct Link  |  

  29. Jamaludin, A., Z. Ahmad, Z.A. Ahmad and A.A. Mohamad, 2010. A direct borohydride fuel cell employing a sago gel polymer electrolyte. Int. J. Hydrogen Energy, 35: 11229-11236.
    CrossRef  |  Direct Link  |  

  30. Jamaludin, A and A.A. Mohamad, 2010. Gel Polymer Electrolyte For Direct Borohydride Fuel Cell., Lambert Academic Publishing, Germany, Pages: 108..
    Direct Link  |  

  31. Jamaludin, A and A.A. Mohamad, 2010. Application of liquid gel polymer electrolyte based on chitosan-NH4NO3 for proton batteries. J. Appl. Polym. Sci., 18: 1240-1243.
    CrossRef  |  Direct Link  |  

  32. Alias, S.S., A.B. Ismail and A.A. Mohamad, 2010. Effect of pH on ZnO nanoparticle properties synthesized by sol-gel centrifugation. J. Alloys Comp., 499: 231-237.
    CrossRef  |  Direct Link  |  

  33. Yap, C.K., W.C. Tan, S.S. Alias and A.A. Mohamad, 2009. Synthesis of zinc oxide by zinc-air system. J. Alloys Compd., 484: 934-938.
    CrossRef  |  Direct Link  |  

  34. Masri, M.N and A.A. Mohamad, 2009. Effect of adding potassium hydroxide to an agar binder for use as the anode in Zn-air batteries. Corros. Sci., 51: 3025-3029.
    CrossRef  |  Direct Link  |  

  35. Badarulzaman, N.A., S. Purwadaria, A.A. Mohamad and Z.A. Ahmad, 2009. The production of nickel-alumina composite coating via electroplating. Ionics, 15: 603-607.
    CrossRef  |  Direct Link  |  

  36. Ng, L.S and A.A. Mohamad, 2008. Effect of temperature on the performance of proton batteries based on Chitosan-NH4NO3-EC membrane. J. Membr. Sci., 325: 653-657.
    CrossRef  |  Direct Link  |  

  37. Mohamad, A.A., H. Haliman, M.A. Sulaiman, M.Z.A. Yahya and A.M.M. Ali, 2008. Electrical conductivity studies of plasticized anhydrous PEO-KOH alkaline solid polymer electrolyte. Ionics, 14: 59-62.
    CrossRef  |  Direct Link  |  

  38. Mohamad, A.A., 2008. Electrochemical properties of aluminum anodes in gel electrolyte-based aluminum-air batteries. Corros. Sci., 50: 3475-3479.
    CrossRef  |  Direct Link  |  

  39. Mohamad, A.A and A.K. Arof, 2008. Ni-MH battery based on plasticized alkaline solid polymer electrolytes. Ionics, 14: 415-420.
    CrossRef  |  Direct Link  |  

  40. Khalid, N.H., I.Y.M. Baba and A.A. Mohamad, 2008. ZnCl2- and NH4Cl-Hydroponics Gel electrolytes for zinc-carbon batteries. J. Power Sources, 176: 393-395.
    CrossRef  |  Direct Link  |  

  41. Mohamad, A.A and A.K. Arof, 2007. Plasticized alkaline solid polymer electrolyte system. Mater. Lett., 61: 3096-3099.
    CrossRef  |  Direct Link  |  

  42. Ng, L.S and A.A. Mohamad, 2006. Protonic battery based on a plasticized chitosan-NH4NO3 solid polymer electrolyte. J. Power Sources, 163: 382-385.
    CrossRef  |  Direct Link  |  

  43. Mohamad, A.A., 2006. Zn/gelled 6 M KOH/O2 zinc-air battery. J. Power Sources, 159: 752-757.
    CrossRef  |  Direct Link  |  

  44. Mohamad, A.A and A.K. Arof, 2006. Effect of temperature on the conductivity, structural, and morphology of PVA-based alkaline solid polymer electrolyte. Ionics, 12: 263-268.
    CrossRef  |  Direct Link  |  

  45. Mohamad, A.A and A.K. Arof, 2006. Effect of storage time on the properties of PVA-KOH alkaline solid polymer electrolyte system. Ionics, 12: 57-61.
    CrossRef  |  Direct Link  |  

  46. Mohamad, A.A., 2005. Degradation in polymer Ni-MH battery. Ionics, 11: 294-300.
    CrossRef  |  Direct Link  |  

  47. Hatta, F.F., M.Z.A. Yahya, A.M.M. Ali, R.H.Y. Subban, M.K. Harun and A.A. Mohamad, 2005. Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte. Ionics, 11: 418-422.
    CrossRef  |  Direct Link  |  

  48. Ali, A.M.M., M.Z.A. Yahya, M. Mustaffa, A.H. Ahmad, R.H.Y. Subban and A.A. Mohamad, 2005. Electrical Properties of plasticized chitosan-lithium imide with oleic acid-based polymer electrolytes for lithium rechargeable batteries. Ionics, 11: 460-463.
    CrossRef  |  Direct Link  |  

  49. Mohamad, A.A., Y. Alias and A.K. Arof, 2003. Mg2Ni hydrogen storage alloys for metal hydride-air cell. J. New Mater. Electrochem. Syst., 6: 205-210.
    Direct Link  |  

  50. Mohamad, A.A., N.S. Mohamed, Y. Alias and A.K. Arof, 2003. Mechanical alloy Mg2Ni for metal hydride-air secondary battery. J. Power Sources, 115: 161-166.
    CrossRef  |  Direct Link  |  

  51. Mohamad, A.A., N.S. Mohamed, M.Z.A. Yahya, R. Othman, S. Ramesh, Y. Alias and A.K. Arof, 2003. Ionic conductivity studies of poly(vinyl alcohol) alkaline solid polymer electrolyte and its use in nickel-zinc cells. Solid State Ionics, 156: 171-177.
    CrossRef  |  Direct Link  |  

  52. Mohamad, A.A., N.S. Mohamed, Y. Alias and A.K. Arof, 2002. Studies of alkaline solid polymer electrolyte and mechanically alloyed polycrystalline Mg2Ni for use in nickel-metal hydride batteries. J. Alloys Comp., 337: 208-213.
    CrossRef  |  Direct Link  |  
Member since January, 2017