Prof. Tiantang Yu

Directorate
Hohai University, Nanjing, China

Highest Degree
Ph.D. in Hydraulic Engineering from Hohai University, China

My URL
https://livedna.org/86.29040

Share this Profile

Area of Interest:

Engineering
Material Engineering
Mechanical and Electrical Engineering
Geostatistics
Solid Mechanics

Selected Publications

  1. Wang, C., Y. Tiantang, S. Guojian, N. Tung-Thanh and Q.B. Tinh, 2019. Shape optimization of structures with cutouts by an efficient approach based on XIGA and chaotic particle swarm optimization. Eur. J. Mech., 74: 176-187.
    CrossRef  |  Direct Link  |  

  2. Wang, C., Y. Tiantang, L.C. Jose, X. Nenggang and Q.B. Tinh, 2019. Adaptive chaotic particle swarm algorithm for isogeometric multi-objective size optimization of FG plates. Struct. Multi. Optim., 10.1007/s00158-019-02238-2.
    CrossRef  |  Direct Link  |  

  3. Tiantang, Y., Z. Jiankang, H. Huifeng and Q.B. Tinh, 2019. A novel size-dependent quasi-3D isogeometric beam model for two-directional FG microbeams analysis. Compos. Struct., 211: 76-88.
    CrossRef  |  Direct Link  |  

  4. Tiantang, Y., L. Wenjiangi and Q.B. Tinh, 2019. Three-dimensional elastoplastic solids simulation by an effective IGA based on Bézier extraction of NURBS. Int. J. Mech. Mater. Des., 15: 175-197.
    CrossRef  |  Direct Link  |  

  5. Tiantang, Y., H. Huifeng, Z. Jiankang and Q.B. Tinh, 2019. Isogeometric analysis of size-dependent effects for functionally graded microbeams by a non-classical quasi-3D theory. Thin-walled struct., 138: 1-14.
    CrossRef  |  Direct Link  |  

  6. Shuohui, Y., Y. Tiantang, T.B. Tinh, Z. Xuejun and G. Shuitao, 2019. Static and dynamic fracture analysis in elastic solids using a multiscale extended isogeometric analysis. Eng. Fract. Mech., 207: 109-130.
    CrossRef  |  Direct Link  |  

  7. Shuo, L., Y. Tiantang, V.L. Le, Y. Shuohui and Q.B. Tinh, 2019. Size and surface effects on mechanical behavior of thin nanoplates incorporating microstructures using isogeometric analysis. Comput. Struct., 212: 173-187.
    CrossRef  |  Direct Link  |  

  8. Tiantang, Y. and Q.B. Tinh, 2018. Numerical simulation of 2-D weak and strong discontinuities by a novel approach based on XFEM with local mesh refinement. Compos. Struct., 196: 112-133.

  9. Sun, S.H., T.T Yu, N. Thanh-Tung, A. Elena and T.Q. Bui, 2018. Structural shape optimization by IGABEM and particle swarm optimization algorithm. Eng. Anal. Boundary Elem., 88: 26-40.
    CrossRef  |  Direct Link  |  

  10. Shuo, L., Y. Tantang, V.L. Le, Y. Shuohui and Q.B. Tinh, 2018. Size effect on cracked functional composite micro-plates by an XIGA-based effective approach. Meccanica, 53: 2637-2658.
    CrossRef  |  Direct Link  |  

  11. Ozdemir, S., S. Tanaka, S. Sadamoto, T.T. Yu and T.Q. Bui, 2018. Numerical buckling analysis for flat and cylindrical shells including through crack employing effective reproducing kernel meshfree modeling. Eng. Anal. Boundary Elem., 97: 55-66.
    CrossRef  |  Direct Link  |  

  12. Ozdemir, M., S. Sadamoto, S. Tanaka, S. Okazawa, T.T. Yu and T.Q. Bui, 2018. Application of 6-DOFs meshfree modeling to linear buckling analysis of stiffened plates with curvilinear surfaces. Acta Mech., 229: 4995-5012.
    CrossRef  |  Direct Link  |  

  13. Jiming, G., Y. Tiantang, V.L. Le, N. Thanh-Tung, T. Satoyuki and Q.B. Tinh, 2018. Multi-inclusions modeling by adaptive XIGA based on LR B-splines and multiple level sets. Finite Elem. Anal. Des., 148: 48-66.
    CrossRef  |  Direct Link  |  

  14. Jiming, G., Y. Tiantang, V.L. Le, N. Thanh-Tung, T. Satoyuki and Q.B. Tinh, 2018. Adaptive multi-patch isogeometric analysis based on locally refined B-splines. Comput. Methods Applied Mech. Eng., 339: 704-738.
    CrossRef  |  Direct Link  |  

  15. Gao, Y., Y. Tiantang, Q.B. Tinh and T. Satoyuki, 2018. Bi-material V-notched SIFs analysis by XFEM and conservative integral approach. Compos. Struct., 196: 217-232.
    CrossRef  |  Direct Link  |  

  16. Ang, L., S. Guo-jian, S. Jing-bo, S. Yang, Y. Tian-tang and S. Hou-gai, 2018. Influence of heterogeneity on mechanical and acoustic emission behaviours of stratified rock specimens. Eur. J. Environ. Civ. Eng., 22: 381-414.
    CrossRef  |  Direct Link  |  

  17. An, Z., Y. Tiantang, Q.B. Tinh, W. Chao and H.D. Duc, 2018. Implementation of isogeometric boundary element method for 2-D steady heat transfer analysis. Adv. Eng. Software, 116: 36-49.
    CrossRef  |  Direct Link  |  

  18. Wenjiang, L., Y. Tiantang, Q.B. Tinh, W. Zhiguo and L. Jose, 2017. 3-D elasto-plastic large deformations: IGA simulation by Bézier extraction of NURBS. Adv. Eng. Software, 108: 68-82.

  19. Wang, Z., Y. Tiantang, Q.B. Tinh, T. Satoyuki and Z. Chuanzeng et al., 2017. 3-D local mesh refinement XFEM with variable-node hexahedron elements for extraction of stress intensity factors of straight and curved planar cracks. Comput. Methods Applied Mech. Eng., 313: 375-405.
    CrossRef  |  Direct Link  |  

  20. Wang, Z., Y. Tiantang and Q.B. Tinh, 2017. Numerical modeling of 3-D inclusions and voids by a novel adaptive XFEM. Adv. Eng. Software, 102: 105-122.
    CrossRef  |  Direct Link  |  

  21. Tiantang, Y., Z. Aixi and C. Yingying, 2017. Efficient crack detection method for tunnel lining surface crack based on infrared image. J. Comput. Civ. Eng., .
    Direct Link  |  

  22. Tiantang, Y., Y. Shuohui, Q.B. Tinh, L. Chen and W. Nuttawit, 2017. Buckling isogeometric analysis of functionally graded plates under combined thermal and mechanical loads. Compos. Struct., 162: 54-69.
    CrossRef  |  Direct Link  |  

  23. Tanaka, S., H. Suzuki, S. Sadamoto, S. Okazawa, T.T. Yu and T.Q. Bui, 2017. Accurate evaluation of mixed-mode intensity factors of cracked shear-deformable plates by an enriched meshfree galerkin formulation. Arch. Applied Mech., 87: 279-298.
    CrossRef  |  Direct Link  |  

  24. Shuohui, Y., Y. Tiantang, Q.B. Tinh, Z. Xuejun and Y. Gao, 2017. Rotation-free isogeometric analysis of functionally graded thin plates considering in-plane material inhomogeneity. Thin-walled struct., 119: 385-395.
    CrossRef  |  Direct Link  |  

  25. Shuo, L., Y. Tiantang, Q.B. Tinh, Y. Shuohui, T. Duc-Kien and T. Satoyuki, 2017. Analysis of functionally graded plates by a simple locking-free quasi-3D hyperbolic plate isogeometric method. Compos. Part B Eng., 120: 182-196.
    CrossRef  |  Direct Link  |  

  26. Shuo, L., Y. Tiantang, Q.B. Tinh and X. Shifeng, 2017. Size-dependent analysis of homogeneous and functionally graded microplates using IGA and a non-classical Kirchhoff plate theory. Compos. Struct., 172: 34-44.
    CrossRef  |  Direct Link  |  

  27. Shuo, L., Y. Tiantang and Q.B. Tinh, 2017. Size effects of functionally graded microplates: A novel non-classical simple-FSDT isogeometric analysis. Eur. J. Mech., 66: 446-458.
    Direct Link  |  

  28. Sadamoto, S., M. Ozdemir, S. Tanaka, K. Taniguchi, T.T. Yu and T.Q. Bui, 2017. An effective meshfree reproducing kernel method for buckling analysis of cylindrical shells with and without cutouts. Comput. Mech., 59: 919-932.
    CrossRef  |  Direct Link  |  

  29. Gao, Y., Y. Tiantang, Q.B. Tinh, M. Chunping and H. Sohichi, 2017. SIFs evaluation of sharp V-notched fracture by XFEM and strain energy approach. Theor. Applied Fracture Mech., 89: 35-44.
    CrossRef  |  Direct Link  |  

  30. Do, T.V., T.Q. Bui, T.T. Yu, D.T. Pham and C.T. Nguyen, 2017. Role of material combination and new results of mechanical behavior for FG sandwich plates in thermal environment. J. Comput. Sci., 21: 164-181.
    CrossRef  |  Direct Link  |  

  31. Chunping, M., Y. Tiantang, V.L. Le and Q.B. Tinh, 2017. An effective computational approach based on XFEM and a novel three-step detection algorithm for multiple complex flaw clusters. Compos. Struct., 193: 207-225.
    CrossRef  |  Direct Link  |  

  32. Yin, S., T. Yu, T.Q. Bui, X. Zheng and S. Tanaka 2016. In-plane material inhomogeneity of functionally graded plates: A higher-order shear deformation plate isogeometric analysis. Comp. Part B: Eng., 106: 273-284.
    CrossRef  |  Direct Link  |  

  33. Tinh, Q.B., V.D. Thom, H.T.T. Lan, H.D. Duc and T. Satoyuki et al., 2016. On the high temperature mechanical behaviors analysis of heated functionally graded plates using FEM and a new third-order shear deformation plate theory. Compos. Part B Eng., 92: 218-241.
    CrossRef  |  Direct Link  |  

  34. Tiantang, Y., Y. Shuohui, Q.B. Tinh, X. Shifeng, T. Satoyuk and H. Sohichi, 2016. NURBS-based isogeometric analysis of buckling and free vibration problems for laminated composites plates with complicated cutouts using a new simple FSDT theory and level set method. Thin-walled struct., 101: 141-156.
    CrossRef  |  Direct Link  |  

  35. Tiantang, Y., Q.B. Tinh, Y. Shuohui, H.D. Duc, C.T. Wu and V.D. Thom, 2016. On the thermal buckling analysis of functionally graded plates with internal defects using extended isogeometric analysis. Compos. Struct., 136: 684-695.
    CrossRef  |  Direct Link  |  

  36. Tiantang, Y., Q.B. Tinh, L. Peng and H. Sohichi, 2016. A stabilized discrete shear gap extended finite element for the analysis of cracked Reissner-Mindlin plate vibration problems involving distorted meshes. Int. J. Mech. Mater. Des., 12: 85-107.

  37. Tanaka, S., S. Hirotaka, S. Shota, S. Shogo, Y. Tiantang Q.B. Tinh, 2016. J-integral evaluation for 2D mixed-mode crack problems employing a meshfree stabilized conforming nodal integration method. Comput. Mech., 58: 185-198.
    CrossRef  |  Direct Link  |  

  38. Shuohui, Y., Y. Tiantang, Q.B. Tinh, L. Peng and H. Sohichi, 2016. Buckling and vibration extended isogeometric analysis of imperfect graded Reissner-Mindlin plates with internal defects using NURBS and level sets. Comput. Struct., 177: 23-38.
    CrossRef  |  Direct Link  |  

  39. Sharma, K., Q.B. Tinh, R.R. Bhargava, Y. Tiantang, L. Jun and H. Sohichi, 2016. Numerical studies of an array of equidistant semi-permeable inclined cracks in 2-D piezoelectric strip using distributed dislocation method. Int. J. Solids Struct., 80: 137-145.
    CrossRef  |  Direct Link  |  

  40. Nguyen, M.N., Q.B. Tinh, T.T. Thien, A.T. Ngoc and V.S. Indra et al., 2016. Enhanced nodal gradient 3D consecutive-interpolation tetrahedral element (CTH4) for heat transfer analysis. Int. J. Heat Mass Transfer, 103: 14-27.
    CrossRef  |  Direct Link  |  

  41. Tiantang, Y., Y. Shuohui, Q.B. Tinh and H. Sohichi, 2015. A simple FSDT-based isogeometric analysis for geometrically nonlinear analysis of functionally graded plates. Finite Elem. Anal. Des., 96: 1-10.
    CrossRef  |  Direct Link  |  

  42. Tiantang, Y., Q.B. Tinh, L. Peng, Z. Chuanzeng and H. Sohichi, 2015. Interfacial dynamic impermeable cracks analysis in dissimilar piezoelectric materials under coupled electromechanical loading with the extended finite element method. Int. J. Solids Struct., 67: 205-218.
    CrossRef  |  Direct Link  |  

  43. Shuohui, Y., Y. Tiantang, Q.B. Tinh, X. Shifeng and H. Sohichi, 2015. A cutout isogeometric analysis for thin laminated composite plates using level sets. Compos. Struct., 127: 152-164.
    CrossRef  |  Direct Link  |  

  44. Shuohui, Y., Y. Tiantang, Q.B. Tinh and N.N. Minh, 2015. Geometrically nonlinear analysis of functionally graded plates using isogeometric analysis. Compos. Eng., 32: 519-558.
    CrossRef  |  Direct Link  |  

  45. Luyang, S., Y. Tiantang and Q.B. Tinh, 2015. Numerical modeling of hydraulic fracturing in rock mass by XFEM. Soil Mech. Found. Eng., 52: 74-83.
    CrossRef  |  Direct Link  |  

  46. Liu, P., T.Q. Bui, D. Zhu, T.T. Yu, J.W. Wang, S.H. Yin and H. Sohichi, 2015. Buckling failure analysis of cracked functionally graded plates by a stabilized discrete shear gap extended 3-node triangular plate element. Compos. Part B Eng., 77: 179-193.
    CrossRef  |  Direct Link  |  

  47. Yepeng, X., Y. Tiantang and Z. Ding, 2014. Two-dimensional elasticity solution for bending of functionally graded beams with variable thickness. Meccanica, 49: 2479-2489.
    CrossRef  |  Direct Link  |  

  48. Tiantang, Y., L. Yongling and Y. Shuohui, 2014.. Dynamic crack analysis in isotropic/orthotropic media via extended isogeometric analysis. Math. Prob. Eng., 10.1155/2014/725795.
    CrossRef  |  Direct Link  |  

  49. Shuohui, Y., S.H. Jack, Y. Tiantang, Q.B. Tinh and P.A. Stéphane, 2014. Isogeometric locking-free plate element: A simple first order shear deformation theory for functionally graded plates. Compos. Struct., 118: 121-138.
    CrossRef  |  Direct Link  |  

  50. Peng, L., Y. Tiantang, Q.B. Tinh, Z. Chuanzeng and X. Yepeng, 2014. Transient thermal shock fracture analysis of functionally graded piezoelectric materials by the extended finite element method. Int. J. Solids Struct., 51: 2167-2182.
    CrossRef  |  Direct Link  |  

  51. Nguyen, M.N., Q.B. Tinh, Y. Tiantang and H. Sohichi, 2014. Isogeometric analysis for unsaturated flow problems. Comput. Geotech., 62: 257-267.
    CrossRef  |  Direct Link  |  

  52. Ang, L., S. Guo-jian, Y. Tian-tang, S. Jing-bo and D. Sheng-you, 2014. Mesoscopic numerical simulation of stratified rock failure using digital image processing. Adv. Mech. Eng., 10.1155/2014/106073.
    CrossRef  |  Direct Link  |  

  53. Yin, S.H., T.T. Yu. and P. Liu, 2013. Free vibration analyses of FGM thin plates by isogeometric analysis based on classical plate theory and physical neutral surface. Adv. Mech. Eng., /10.1155/2013/634584.
    CrossRef  |  Direct Link  |  

  54. YU, T.T. and Z.W. Gong, 2013. Numerical simulation of temperature field in heterogeneous material with the XFEM. Arch. Civ. Mech. Eng., 13: 199-208.
    CrossRef  |  Direct Link  |  

  55. Peng, L., Y. Tiantang, Q.B. Tinh and Z. Chuanzeng, 2013. Transient dynamic crack analysis in non-homogeneous functionally graded piezoelectric materials by the X-FEM. Comput. Mater. Sci., 69: 542-558.
    CrossRef  |  Direct Link  |  

  56. Tiantang, Y. and S. Luyang, 2012. Determination of sharp V-notch stress intensity factors using the extended finite element method. J. Strain Anal. Eng. Des., 47: 95-103.
    CrossRef  |  Direct Link  |  

  57. Liu, P., T.Q. Bui, Ch. Zhang, T.T. Yu and G.R. Liu, 2012. The singular edge-based smoothed finite element method for stationary dynamic crack problems in 2D elastic solids. Comput. Methods Applied Mech. Eng., 236: 68-80.
    CrossRef  |  Direct Link  |  

  58. YU, T.T. and Q.W. Ren, 2011. Modeling crack in viscoelastic media using the extended finite element method. Sci. China Technol. Sci., 54: 1599-1606.
    CrossRef  |  Direct Link  |  

  59. YU, T.T. and P. LIU, 2011. Improved implementation of the extended finite element method for stress analysis around cracks. Arch. Civ. Mech. Eng., 11: 787-805.
    CrossRef  |  Direct Link  |  

  60. T.T. Yu., 2011. The extended finite element method (XFEM) for discontinuous rock masses. Eng. Comput., 28: 40-369.
    Direct Link  |  

  61. T.T. Yu., 2011. Considering contact conditions between discontinuity surfaces in extended finite element method (XFEM). Int. J. Numer. Methods Biomed. Eng., 27: 899-908.
    CrossRef  |  Direct Link  |  

  62. Wen, R.Q., Y. Dong and Y. Tiantang, 2009. Numerical modeling of concrete hydraulic fracturing with extended finite element method. Sci. China Ser. E Technol. Sci., 52: 559-565.
    CrossRef  |  Direct Link  |  

  63. Tiantang, Y., 2009. Statistical damage constitutive model of Quasi-brittle materials. J. Aerosp. Eng., 22: 95-100.
    Direct Link  |  
Member since June, 2019