Dr. Nadir Ayrilmis

Professor
Depatment of Wood Mechanics and Technology, Faculty of Forestry, Istanbul University-Cerrahpasa, Turkiye

Highest Degree
Ph.D. in Wood-Based Composites from Istanbul University, Turkiye

My URL
https://livedna.org/90.2213

Share this Profile

Biography

Dr.Nadir Ayrilmis is currently working as Full Prof.Dr., at Depatment of Wood Mechanics and Technology, Faculty of Forestry, Istanbul University-Cerrahpasa since 1998 and having 21 years of experience in teaching, research in the field of wood technology, wood-based panels and natural-fiber composites, composites. His area of research interests includes raw matarial characteristics of wood and non-wood natural fibers, man-made fibres, production of wood-based composites and natural fiber composites, 3D printed natural fiber/bio polymers, inorganic bonded composites, sandwich-structured wood based composites, fire-retardant treated composites, Hybrid Reinforced/Filled Polymer Composites, Lignocellulosic Reinforced/Filled Polymer Composites, Modification and Treatment of Lignocellulosic Fibres and Solid Wood, Nano Composites and Nanocellulose fibres. Presently he is supervising 2 PhD students and 3 Master students in the field of Wood-based panels and 3D printing technology for natural fiber/bio polymers. He has several Research grant at University/National/International level on polymer composites and its related research. So far he has published 4 book chapters, and more than 180 International journal papers (SCI/SCI-Expanded) in reputed Journals in the field of Wood Sicence and Technology, and Natural Fiber Composites and allied field. His H index is 41 (Google); 29 (web of science).

Area of Interest:

Social Sciences
Wood
Natural Fiber Reinforced
Recycling of Natural Fibers
Sandwich Wood Composites

Selected Publications

  1. Ezzaraa, I., N. Ayrilmis, M. Abouelmajd, M.K. Kuzman and A. Bahlaoui et al., 2023. Numerical modeling based on finite element analysis of 3D-printed wood-polylactic acid composites: A comparison with experimental data. Forests, Vol. 14. 10.3390/f14010095.
    CrossRef  |  Direct Link  |  

  2. Karuppiah, G., K.C. Kuttalam, N. Ayrilmis, R. Nagarajan, M.P.I. Devi, S. Palanisamy and C. Santulli, 2022. Tribological analysis of jute/coir polyester composites filled with eggshell powder (ESP) or nanoclay (NC) using grey rational method. Fibers, Vol. 10. 10.3390/fib10070060.
    CrossRef  |  Direct Link  |  

  3. Ezzaraa, I., N. Ayrilmis, M.K. Kuzman, S. Belhouideg and J. Bengourram, 2022. Micromechanical models for predicting the mechanical properties of 3D-printed wood/PLA composite materials: A comparison with experimental data. Mech. Adv. Mater. Struct., 29: 6755-6767.
    CrossRef  |  Direct Link  |  

  4. Ayrilmis, N., 2022. A review on electrostatic powder coatings for the furniture industry. Int. J. Adhes. Adhes., Vol. 113. 10.1016/j.ijadhadh.2021.103062.
    CrossRef  |  Direct Link  |  

  5. Ayrilmis, N. and E. Yildiz, 2022. Physical and mechanical properties of thermoplastic composites filled with wood flour of underutilized chaste tree. Drvna Ind., 73: 496-501.
    CrossRef  |  Direct Link  |  

  6. Sivaranjana, P., E.R. Nagarajan, N. Rajini, N. Ayrilmis, A.V. Rajulu and S. Siengchin, 2021. Preparation and characterization studies of modified cellulosic textile fabric composite with in situ-generated AgNPs coating. J. Ind. Text., 50: 1111-1126.
    CrossRef  |  Direct Link  |  

  7. Senthil, M.K.T., N. Rajini, A. Alavudeen, S. Suchart, R.A. Varada and A. Nadir, 2021. Development and analysis of completely biodegradable cellulose/banana peel powder composite films. J. Nat. Fibers, 18: 151-160.
    CrossRef  |  Direct Link  |  

  8. Rajini, N., K. Mayandi, P.M. Manoj, S. Siengchin, N. Ayrilmis, C. Bennet and S.O. Ismail, 2021. Tribological properties of cyperus pangorei fibre reinforced polyester composites (friction and wear behaviour of cyperus pangorei fibre/polyester composites). J. Nat. Fibers, 18: 261-273.
    CrossRef  |  Direct Link  |  

  9. Kord, B., N. Ayrilmis and M.D. Ghalehno, 2021. Effect of fungal degradation on technological properties of carbon nanotubes reinforced polypropylene/rice straw composites. Polym. Polym. Compos., 29: 303-310.
    CrossRef  |  Direct Link  |  

  10. Kord, B., F. Movahedi, L. Adlnasab and N. Ayrilmis, 2021. Decreasing formaldehyde emission from particleboard panels fabricated by adding newly phenolic compounds as a scavenger to urea formaldehyde resin. Res. Square, 10.21203/rs.3.rs-560970/v1.
    CrossRef  |  Direct Link  |  

  11. Ayrilmis, N., E. Yurttaş, A. Durmus, F. Özdemir, R. Nagarajan, M. Kalimuthu and M.K. Kuzman, 2021. Properties of biocomposite films from PLA and thermally treated wood modified with silver nanoparticles using leaf extracts of oriental sweetgum. J. Polym. Environ., 29: 2409-2420.
    CrossRef  |  Direct Link  |  

  12. Sethu, R.P., K. Mayandi, N. Rajini, K.S.K. Rajesh and N. Ayrilmis, 2020. A study on the entrepreneurial opportunities, global and Indian economy in 3D printing sector. Res. Square, 10.21203/rs.3.rs-38070/v2.
    CrossRef  |  Direct Link  |  

  13. Kokten, E.S., G. Özbay and N. Ayrilmis, 2020. Synthesis of biobased phenolic resins using catalytic pyrolysis oil and its effect on oriented strand board performance. J. Adhes., 96: 475-489.
    CrossRef  |  Direct Link  |  

  14. Ayrilmis, N., R. Nagarajan and M.K. Kuzman, 2020. Effects of the face/core layer ratio on the mechanical properties of 3D printed wood/polylactic acid (PLA) green biocomposite panels with a gyroid core. Polymers, Vol. 12. 10.3390/polym12122929.
    CrossRef  |  Direct Link  |  

  15. Thiagamani, S.M.K., N. Rajini, S. Siengchin, A.V. Rajulu, N. Hariram and N. Ayrilmis, 2019. Influence of silver nanoparticles on the mechanical, thermal and antimicrobial properties of cellulose-based hybrid nanocomposites. Compos. Part B: Eng., 165: 516-525.
    CrossRef  |  Direct Link  |  

  16. Senthil, M.K.T., Y. Krittirash, N. Rajini, S. Suchart, A. Nadir and R.A. Varada, 2019. Mechanical and thermal properties of spent coffee bean filler/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) biocomposites: Effect of recycling. Process Saf. Environ. Prot., 124: 187-195.
    CrossRef  |  Direct Link  |  

  17. Prabhakar, M.M., N. Rajini, N. Ayrilmis, K. Mayandi and S. Siengchin et al., 2019. An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability. Compos. Struct., Vol. 230. 10.1016/j.compstruct.2019.111419.
    CrossRef  |  Direct Link  |  

  18. Prabhakar, M.M., N. Rajini, K. Mayandi, K. Subash and S. Subramanian, S.V.R.B. Seelan and N. Ayrilmis, 2019. Impact response of basalt composite pipe using filament winding. J. Phys.: Conf. Ser., Vol. 1240. 10.1088/1742-6596/1240/1/012104.
    CrossRef  |  Direct Link  |  

  19. Ozcifci, A., E. Kokten, N. Ayrilmis, G. Özbay and S. Altun, 2019. Effects of catalysts on modulus of rupture and chemical structure of heat-treated wood. Drvna Ind., 69: 207-213.
    CrossRef  |  Direct Link  |  

  20. Nemli, G., Z. Odabaş-Serin, F. Özdemir and N. Ayrılmı, 2019. Potential use of textile dust in the middle layer of three-layered particleboards as an eco-friendly solution. BioResources, 14: 120-127.
    CrossRef  |  Direct Link  |  

  21. Mayandi, K., N. Rajini, M. Manojprabhakar, S. Siengchin and N. Ayrilmis, 2019. Recent Studies on Durability of Natural/Synthetic Fiber Reinforced Hybrid Polymer Composites. In: Durability and Life Prediction in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, Jawaid, M., M. Thariq and N. Saba, Academic Press, United States, ISBN 978-0-08-102290-0, pp: 1-13.
    CrossRef  |  Direct Link  |  

  22. Lunguleasa, A., N. Ayrilmis, C. Spirchez and C. Croitoru, 2019. Increasing the calorific properties of sawdust waste from pellets by torrefaction. BioResources, 14: 7821-7839.
    CrossRef  |  Direct Link  |  

  23. Kuzman, M.K., N. Ayrilmis, M. Sernek and M. Kariz, 2019. Effect of selected printing settings on viscoelastic behaviour of 3D printed polymers with and without wood. Mater. Res. Exp., Vol. 6. 10.1088/2053-1591/ab411c.
    CrossRef  |  Direct Link  |  

  24. Kumar, T.S.M., N. Rajini, T. Huafeng, A.V. Rajulu, N. Ayrilmis and S. Siengchin, 2019. Improved mechanical and thermal properties of spent coffee bean particulate reinforced poly(propylene carbonate) composites. Part. Sci. Technol., 37: 643-650.
    CrossRef  |  Direct Link  |  

  25. Kumar, T.S.M., N. Rajini, S. Siengchin, A.V. Rajulu and N. Ayrilmis, 2019. Influence of Musa acuminate bio-filler on the thermal, mechanical and visco-elastic behavior of poly (propylene) carbonate biocomposites. Int. J. Polym. Anal. Charact., 24: 439-446.
    CrossRef  |  Direct Link  |  

  26. Kumar, T.S.M., K.S. Kumar, N. Rajini, S. Siengchin, N. Ayrilmis and A.V. Rajulu, 2019. A comprehensive review of electrospun nanofibers: Food and packaging perspective. Compos. Part B: Eng., Vol. 175. 10.1016/j.compositesb.2019.107074.
    CrossRef  |  Direct Link  |  

  27. Kumar, R.M., N. Rajini, K. Mayandi and N. Ayrilmis, 2019. Friction and wear properties of PTFE blended ABS polymer composite. AIP Conf. Proc., Vol. 2057. 10.1063/1.5085617.
    CrossRef  |  Direct Link  |  

  28. Krishnasamy, S., C. Muthukumar, R. Nagarajan, S.M.K. Thiagamani and N. Saba et al., 2019. Effect of fibre loading and Ca(OH)2 treatment on thermal, mechanical, and physical properties of pineapple leaf fibre/polyester reinforced composites. Mater. Res. Exp., Vol. 6. 10.1088/2053-1591/ab2702.
    CrossRef  |  Direct Link  |  

  29. Kaymakci, A., E. Birinci and N. Ayrilmis, 2019. Surface characteristics of wood polypropylene nanocomposites reinforced with multi-walled carbon nanotubes. Compos. Part B: Eng., 157: 43-46.
    CrossRef  |  Direct Link  |  

  30. Kalimuthu, M., R. Nagarajan, A.A. Batcha, S. Siengchin, V.R. Anumakonda and N. Ayrilmis, 2019. Mechanical property and morphological analysis of polyester composites reinforced with Cyperus pangorei fibers. J. Bionic Eng., 16: 164-174.
    CrossRef  |  Direct Link  |  

  31. Devi, M.P.I., N. Nallamuthu, N. Rajini, T.S.M. Kumar, S. Siengchin, A.V. Rajulu and N. Ayrilmis, 2019. Biodegradable poly(propylene) carbonate using in-situ generated CuNPs coated Tamarindus indica filler for biomedical applications. Mater. Today Commun., 19: 106-113.
    CrossRef  |  Direct Link  |  

  32. Ayrilmis, N., M. Kariž and M.K. Kuzman, 2019. Effect of wood flour content on surface properties of 3D printed materials produced from wood flour/PLA filament. Int. J. Polym. Anal. Charact., 24: 659-666.
    CrossRef  |  Direct Link  |  

  33. Ayrilmis, N., M. Kariz, J.H. Kwon and M.K. Kuzman, 2019. Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials. Int. J. Adv. Manuf. Technol., 102: 2195-2200.
    CrossRef  |  Direct Link  |  

  34. Ayrilmis, N., F. Ozdemir, O.B. Nazarenko and P.M. Visakh, 2019. Mechanical and thermal properties of Moringa oleifera cellulose-based epoxy nanocomposites. J. Compos. Mater., 53: 669-675.
    CrossRef  |  Direct Link  |  

  35. Ashori, A., M. Jonoobi, N. Ayrilmis, A. Shahreki and M.A. Fashapoyeh, 2019. Preparation and characterization of polyhydroxybutyrate-co-valerate (PHBV) as green composites using nano reinforcements. Int. J. Biol. Macromol., 136: 1119-1124.
    CrossRef  |  Direct Link  |  

  36. Akbulut, T. and N. Ayrilmis, 2019. Some advantages of three-layer medium-density fibreboard as compared to the traditional single-layer one. J. Wood Sci., Vol. 65. 10.1186/s10086-019-1822-4.
    CrossRef  |  Direct Link  |  

  37. Lunguleasa, A., N. Ayrilmis, C. Spirchez and F. Özdemir, 2018. Investigation of the effects of heat treatment applied to beech plywood. Drvna Ind., 69: 349-355.
    CrossRef  |  Direct Link  |  

  38. Kumar, T.S.M., N. Rajini, K.O. Reddy, A.V. Rajulu, S. Siengchin and N. Ayrilmis, 2018. All-cellulose composite films with cellulose matrix and Napier grass cellulose fibril fillers. Int. J. Biol. Macromol., 112: 1310-1315.
    CrossRef  |  Direct Link  |  

  39. Ayrilmis, N., T. Kaptı, A. Gürel and M. Ohlmeyer, 2018. Reducing formaldehyde emission from wood-based panels by modification of UF and MUF resins with condensates obtained from kiln-drying of wood. Holzforschung, 72: 753-757.
    CrossRef  |  Direct Link  |  

  40. Ayrilmis, N., J.H. Kwon and T.H. Han, 2018. Effect of core layer composition on water resistance and mechanical properties of hybrid particleboard. Environ. Eng. Manag. J., 17: 2857-2864.
    CrossRef  |  Direct Link  |  

  41. Ayrilmis, N., 2018. Effect of layer thickness on surface properties of 3D printed materials produced from wood flour/PLA filament. Polym. Test., 71: 163-166.
    CrossRef  |  Direct Link  |  

  42. Ayrilmis, N. and T. Akbulut, 2018. Screw withdrawal resistance and surface soundness of three-layer fiberboard having coarse fibers in core layer. Drvna Ind., 69: 379-385.
    CrossRef  |  Direct Link  |  

  43. Ashori, A., M. Ghofrani, M.H. Rezvani and N. Ayrilmis, 2018. Development and material properties of reinforced plywood using carbon fiber and waste rubber powder. Polym. Compos., 39: 675-680.
    CrossRef  |  Direct Link  |  

  44. Al, G., D. Aydemir, N. Ayrilmis, B. Kaygin and G. Gunduz, 2018. The effect of nanoboron nitride on some properties of biopolymer nanocomposites with cellulose nanofibrils and nanoclays. Drvna Ind., 69: 43-48.
    CrossRef  |  Direct Link  |  

  45. Al, G., D. Aydemir, B. Kaygin, N. Ayrilmis and G. Gunduz, 2018. Preparation and characterization of biopolymer nanocomposites from cellulose nanofibrils and nanoclays. J. Compos. Mater., 52: 689-700.
    CrossRef  |  Direct Link  |  

  46. Vratuša, S., M. Kariž, N. Ayrilmis and M.K. Kuzman, 2017. Finite element simulations of the loading and deformation of plywood seat shells. Eur. J. Wood Prod., 75: 729-738.
    CrossRef  |  Direct Link  |  

  47. Park, B.D., N. Ayrilmis, J.H. Kwon and T.H. Han, 2017. Effect of microfibrillated cellulose addition on thermal properties of three grades of urea-formaldehyde resin. Int. J. Adhes. Adhes., 72: 75-79.
    CrossRef  |  Direct Link  |  

  48. Kord, B., P. Ravanfar and N. Ayrilmis, 2017. Influence of organically modified nanoclay on thermal and combustion properties of bagasse reinforced HDPE nanocomposites. J. Polym. Environ., 25: 1198-1207.
    CrossRef  |  Direct Link  |  

  49. Kord, B., B. Malekian and N. Ayrilmis, 2017. Weathering performance of montmorillonite/wood flour-based polypropylene nanocomposites. Mech. Compos. Mater., 53: 271-278.
    CrossRef  |  Direct Link  |  

  50. Kaymakci, A., T. Gulec, S.K. Hosseinihashemi and N. Ayrilmis, 2017. Physical, mechanical and thermal properties of wood/zeolite/plastic hybrid composites. Maderas Cienc. Tecnol., 19: 339-348.
    CrossRef  |  Direct Link  |  

  51. Kaymakci, A., N. Ayrilmis, T. Gulec and M. Tufan, 2017. Preparation and characterization of high-performance wood polymer nanocomposites using multi-walled carbon nanotubes. J. Compos. Mater., 51: 1187-1195.
    CrossRef  |  Direct Link  |  

  52. Gurau, L., N. Ayrilmis, J.T. Benthien, M. Ohlmeyer, M.K. Kuzman and S. Racasan, 2017. Effect of species and grinding disc distance on the surface roughness parameters of medium density fiberboard. Eur. J. Wood Prod., 75: 335-346.
    CrossRef  |  Direct Link  |  

  53. AyrilmiÅŸ, N., J.H. Kwon and T.H. Han, 2017. Effect of wood chip size on hemicellulose extraction andtechnological properties of flakeboard. Turk. J. Agric. For., 41: 331-337.
    CrossRef  |  Direct Link  |  

  54. Ayrilmis, N., T. Güleç, E. Peşman and A. Kaymakci, 2017. Potential use of cotton dust as filler in the production of thermoplastic composites. J. Compos. Mater., 51: 4147-4155.
    CrossRef  |  Direct Link  |  

  55. Ayrilmis, N., T. Akbulut, and E. YurttaÅŸ, 2017. Effects of core layer fiber size and face-to-core layer ratio on the properties of three-layered fiberboard. BioResources, 12: 7964-7974.
    CrossRef  |  Direct Link  |  

  56. Ayrilmis, N., S.K. Hosseinihashemi, M. Karimi, A. Kargarfard and H.S. Ashtiani, 2017. Technological properties of cement-bonded composite board produced with the main veins of oil palm (Elaeis guineensis) particles. BioResources, 12: 3583-3600.
    CrossRef  |  Direct Link  |  

  57. Ayrilmis, N., M. TaÅŸdemir and T. Akbulut, 2017. Water absorption and mechanical properties of PP/HIPS hybrid composites filled with wood flour. Polym. Compos., 38: 863-869.
    CrossRef  |  Direct Link  |  

  58. Ayrilmis, N., J.T. Benthien and M. Ohlmeyer, 2017. Effect of wood species, digester conditions, and defibrator disc distance on wettability of fiberboard. J. Wood Sci., 63: 248-252.
    CrossRef  |  Direct Link  |  

  59. Ayrilmis, N. and G. Özbay, 2017. Technological properties of plywood bonded with phenol-formaldehyde resol resin synthesized with bio-oil. Cerne, 23: 493-500.
    CrossRef  |  Direct Link  |  

  60. Tufan, M., T. Güleç, E. Peşman and N. Ayrilmis, 2016. Technological and thermal properties of thermoplastic composites filled with heat-treated alder wood. BioResources. 11: 3153-3164.
    CrossRef  |  Direct Link  |  

  61. Tufan, M. and N. Ayrilmis, 2016. Potential use of hazelnut husk in recycled high-density polyethylene composites. BioResources, 11: 7476-7489.
    CrossRef  |  Direct Link  |  

  62. Kwon, J.H. and N. Ayrilmis, 2016. Effect of heat-treatment of flakes on physical and mechanical properties of flakeboard. Eur. J. Wood Prod., 74: 135-136.
    CrossRef  |  Direct Link  |  

  63. Kaymakci, A. and N. Ayrilmis, 2016. Influence of repeated injection molding processing on some mechanical and thermal properties of wood plastic composites. BioResources, 11: 10112-10121.
    CrossRef  |  Direct Link  |  

  64. Hosseinihashemi, S.K., S. Karimi, A.J. Latibari, A. Tamjidi and N. AyrilmiÅŸ, 2016. Use of black locust/poplar wood as filler in thermoplastic composites. Turk. J. Agric. For., 40: 327-334.
    CrossRef  |  Direct Link  |  

  65. Hosseinihashemi, S.K., F. Arwinfar, A. Najafi, G. Nemli and N. Ayrilmis, 2016. Long-term water absorption behavior of thermoplastic composites produced with thermally treated wood. Measurement, 86: 202-208.
    CrossRef  |  Direct Link  |  

  66. Hosseinihashemi, S.K., A. Eshghi, N. Ayrilmis and H. Khademieslam, 2016. Thermal analysis and morphological characterization of thermoplastic composites filled with almond shell flour/montmorillonite. BioResources, 11: 6768-6779.
    CrossRef  |  Direct Link  |  

  67. Hosseinihashemi, S.K., A. Eshghi, B. Kord, A. Lashgari and N. Ayrilmis, 2016. Hardness, decay and water resistance of polypropylene/montmorillonite/almond shell flour composites. Mat. Res., 19: 440-445.
    CrossRef  |  Direct Link  |  

  68. Ayrilmis, N., Y.K. Lee, J.H. Kwon, T.H. Han and H.J. Kim, 2016. Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose. Build. Environ., 97: 82-87.
    CrossRef  |  Direct Link  |  

  69. Ayrilmis, N., J.H. Kwon, S.H. Lee, T.H. Han and C.W. Park, 2016. Microfibrillated-cellulose-modified urea-formaldehyde adhesives with different F/U molar ratios for wood-based composites. J. Adhes. Sci. Technol., 30: 2032-2043.
    CrossRef  |  Direct Link  |  

  70. Ayrilmis, N. and M.K. Kuzman, 2016. Properties of honeycomb paperboards faced with heat-treated thin medium-density fiberboards. BioResources, 11: 7803-7810.
    CrossRef  |  Direct Link  |  

  71. Ozkaya K., N. Ayrilmis and S. Ozdemir, 2015. Potential use of waste marble powder as an adhesive filler in the manufacture of laminated veneer lumber. BioResour., 10: 1686-1695.
    Direct Link  |  

  72. Ozbay, G., and N. Ayrilmis, 2015. Bonding performance of wood bonded with adhesive mixtures composed of phenol-formaldehyde and bio-oil. Ind. Crops Prod., 66: 68-72.
    CrossRef  |  Direct Link  |  

  73. Muhcu S., G. Nemli, N. Ayrilmis, S. Bardak, S. Baharoglu, B. Sari and Z. Gercek, 2015. Effect of log position in European Larch (Larix decidua Mill.) tree on the technological properties of particleboard. Scand. J. For. Res., 30: 357-362.
    CrossRef  |  Direct Link  |  

  74. Kwon, J.H. and N. Ayrilmis, 2015. Combined effect of acetylation and wax emulsion on physical and mechanical properties of particleboard. Eur. J. Wood Wood Prod., 73: 845-847.
    Direct Link  |  

  75. Kwon, H. Jin and N. Ayrilmis, 2015. Effect of heat-treatment of flakes on physical and mechanical properties of flakeboard. Eur. J. Wood Wood Prod., .

  76. Kwon J.H., S.H. Lee, N. Ayrilmis and T.H. Han, 2015. Tensile shear strength of wood bonded with urea-formaldehyde with different amounts of microfibrillated cellulose. Int. J. Adhes. Adhes., 60: 88-91.
    CrossRef  |  Direct Link  |  

  77. Kwon J.H., N.Ayrilmis and T.H. Han, 2015. Effect of core layer composıtıon on water resıstance and mechanıcal propertıes of hybrıd partıcleboard. Environ. Eng. Manage. J., .

  78. Kuzman M.K., A. Kutnar, N. Ayrilmis and M. Kariz, 2015. Effect of heat treatment on mechanical properties of selected wood joints. Eur. J. Wood Wood Prod., 73: 689-691.
    Direct Link  |  

  79. Grosel J., L.Z. Stirn, N. Ayrilmis and M.K. Kuzman, 2015. Comparison of some aggregation techniques using group analytic hierarchy process. Expert Syst. Appl., 42: 2198-2204.
    CrossRef  |  Direct Link  |  

  80. Ayrilmis, N., A. Kaymakci and T. Gulec, 2015. Potential use of decayed wood in production of wood plastic composite. Ind. Crops Prod., 74: 279-284.
    Direct Link  |  

  81. Ayrilmis N., J.H. Kwon and T.H. Han, 2015. Effect of wood-derived charcoal content on properties of wood plastic composites. Mater. Res., 18: 654-659.
    CrossRef  |  Direct Link  |  

  82. Ayrilmis N, M. Tasdemir and T. Akbulut, 2015. Water absorption and mechanical properties of PP/HIPS hybrid composites filled with wood flour. Polym. Composites, .

  83. Aslan, M., G. Ozbay and N. Ayrilmis, 2015. Adhesive characteristics and bonding performance of phenol formaldehyde modified with phenol-rich fraction of crude bio-oil. J. Adhes. Sci. Technol., 29: 2679-2691.
    CrossRef  |  Direct Link  |  

  84. Ozdemir F., N. Ayrilmis, A. Kaymakci and J.H. Kwon., 2014. Improving dimensional stability of injection molded wood plastic composites using cold and hot water extraction methods. Maderas Cienc. Tecnol., 16: 365-372.

  85. Kwon J.H., R.H. Sin, N. Ayrilmis and T.H. Han, 2014. Properties of solid wood and laminated wood lumber manufactured by cold pressing and heat treatment. Mater. Des., 62: 375-381.
    Direct Link  |  

  86. Kwon J.H., N. Ayrilmis and T.H. Han, 2014. Combined effect of thermoplastic and thermosetting adhesives on properties of particleboard with rice husk core. Mater. Res., .

  87. Kaymakci, A. and N. Ayrilmis, 2014. Waste chestnut shell as a source of reinforcing fillers for polypropylene composites. J. Thermoplast. Compos. Mater., 27: 1054-1064.

  88. Kaymakci, A. and N. Ayrilmis, 2014. Surface roughness and wettability of polypropylene composites filled with fast-growing biomass: Paulownia elongata wood. J. Compos. Mater., 48: 951-957.

  89. Kaymakci, A. and N. Ayrilmis, 2014. Investigation of correlation between brinell hardness and tensile strength of wood plastic composites. Compos. Part B Eng., 58: 582-585.
    Direct Link  |  

  90. Ergul E. and N. Ayrilmis, 2014. Effect of outdoor storage conditions of wood chip pile on the technological properties of wood-based panel. Biomass Bioenergy, 61: 66-72.
    Direct Link  |  

  91. Baharoglu M., G. Nemli, B. Sari, N. Ayrilmis, S. Bardak and E. Zekovic, 2014. Effect of paraffin application technique on the physical and mechanical properties of particleboard. Sci. Eng. Compos. Mater., 21: 191-195.
    Direct Link  |  

  92. Ayrilmis, N., T. Dundar, A. Kaymakci, F. Ozdemir and J.H. Kwon, 2014. Mechanical and thermal properties of wood-plastic composites reinforced with hexagonal boron nitride. Polym. Compos., 35: 194-200.

  93. Ayrilmis N., J.H. Kwon and T.H. Han, 2014. Improving bending and tensile properties of lignocellulosic filled polypropylene composite panels using aramid fabric. Fibers Polym., 15: 2410-2415.
    Direct Link  |  

  94. Atar I., G. Nemli, N. Ayrilmis, M. Baharoglu, B. Sari and S. Bardak, 2014. Effects of hardener type, urea usage and conditioning period on the quality properties of particleboard. Mater. Des., 56: 91-96.
    Direct Link  |  

  95. Ozkaya, K., N. Ayrilmis, T. Dizel and H.O. Imirzi, 2013. Utilization of extract of fresh tree leaves as extender in synthetic adhesives for laminated veneer lumber (LVL). Ind. Crops Prod., 44: 67-70.
    Direct Link  |  

  96. Kwon, J.H., S.B. Park, N. Ayrilmis, S.W. Oh and N.H. Kim, 2013. Effect of carbonization temperature on electrical resistivity and physical properties of wood and wood-based composite. Composites Part B: Eng., 46: 102-107.
    CrossRef  |  

  97. Kwon, J.H., S.B. Park, N. Ayrilmis, N.H. Kim and S.M. Kwon, 2013. Electromagnetic interference shielding effectiveness, electrical resistivity and mechanical performance of carbonized medium density fiberboard. J. Compos. Mater., 47: 1951-1958.
    Direct Link  |  

  98. Kwon, J.H., N. Ayrilmis and T.H. Hyung, 2013. Enhancement of flexural properties and dimensional stability of rice husk particleboard using wood strands in face layers. Compos. Part B Eng., 44: 728-732.
    Direct Link  |  

  99. Kuzman, M.J., P. Groselj, N. Ayrilmis, M.Z Senegacnik, 2013. Comparison of passive house construction types using analytic hierarchy process. Energy Build., 64: 258-263.
    Direct Link  |  

  100. Kaymakci, A. N. Ayrilmis, F. Ozdemir and T. Gulec, 2013. Utilization of sunflower stalk in manufacture of thermoplastic composite. J. Polym. Environ., 21: 1135-1142.
    Direct Link  |  

  101. B., G. Nemli, N. Ayrilmis, M. Baharoglu, S. Bardak, 2013. The influences of drying temperature of wood particles on the quality properties of particleboard composite. Drying Technol., 31: 17-23.
    Direct Link  |  

  102. Ayrilmis, N., T. Akbulut, A. Kaymakci and G.M. Elmas, 2013. Mechanical performance of composites based on wastes of polyethylene aluminum and lignocellulosics. Compos. Part B Eng., 47: 150-154.
    Direct Link  |  

  103. Ayrilmis, N., A. Kaymakci and F. Ozdemir, 2013. Sunflower seed cake as reinforcing filler in thermoplastic composites. J. Appl. Polym. Sci., 129: 1170-1178.
    Direct Link  |  

  104. Ayrilmis, N., A. Kaymakci and F. Ozdemir, 2013. Physical, mechanical, and thermal properties of polypropylene composites filled with walnut shell flour. J. Ind. Eng. Chem., 19: 908-914.
    Direct Link  |  

  105. Ayrilmis, N., 2013. Combined effects of boron and compatibilizer on dimensional stability and mechanical properties of wood/HDPE composites. Compos. Part B Eng., 44: 745-749.
    Direct Link  |  

  106. Ayrilmis, N. and E. Kara, 2013. Effect of resination technique on mechanical properties of medium density fiberboard. Bioresour., 8: 420-426.

  107. Ayrilmis, N. and A. Kaymakci, 2013. Fast growing biomass as reinforcing filler in thermoplastic composites: Paulownia elongata wood. Ind. Crops Prod., 43: 457-464.
    Direct Link  |  

  108. Akgul, M., N. Ayrilmis, O. Camlibel and S. Korkut, 2013. Potential utilization of burned wood in manufacture of medium density fiberboard. J. Mater. Cycles Waste Manage., 15: 195-201.
    CrossRef  |  Direct Link  |  

  109. Kaymakci, A., N. Ayrilmis and T. Gulec, 2012. Surface properties and hardness of polypropylene composites filled with sunflower stalk flour. Bioresour., 8: 592-602.

  110. Candan, Z., N. Ayrilmis, T. Dundar and M. Atar, 2012. Fire performance of LVL panels treated with fire retardant chemicals. Wood Res., 57: 651-658.

  111. Buyuksari, U., S. Hiziroglu, H. Akkilic and N. Ayrilmis, 2012. Mechanical and physical properties of medium density fiberboard panels laminated with thermally compressed veneer. Compos. Part B Eng., 43: 110-114.
    Direct Link  |  

  112. Buyuksari, U., N. Ayrilmis and T Akbulut, 2012. Compression wood as a source of reinforcing filler for thermoplastic composites. J. Appl. Polym. Sci., 123: 1740-1745.
    Direct Link  |  

  113. Baharoglu, M., G. Nemli, B. Sarı, S. Bardak and N. Ayrilmis, 2012. The influence of moisture content of raw material on the physical and mechanical properties, surface roughness, wettability, and formaldehyde emission of particleboard composite. Compos. Part B Eng., 43: 2448-2451.
    Direct Link  |  

  114. Ayrilmis, N., T. Akbulut, T. Dundar, R.H. White, F. Mengeloglu, E.U. Buyuksari, Z. Candan and E. Avcı, 2012. Effect of boron and phosphate compounds on physical, mechanical, and fire properties of wood-polypropylene composites. Constr. Build. Mater., 33: 63-69.
    Direct Link  |  

  115. Ayrilmis, N., J.H. Kwon and T.H. Hyung, 2012. Improving core bond strength and dimensional stability of particleboard using polymer powder in core layer. Compos. Part B Eng., 43: 3462-3466.
    Direct Link  |  

  116. Ayrilmis, N., J.H. Kwon and T.H. Hyung, 2012. Effect of resin type and content on properties of composite particleboard made of a mixture of wood and rice husk. Int. J. Adhes. Adhes., 38: 79-83.
    Direct Link  |  

  117. Ayrilmis, N., J. Benthien, H. Theomen and R.H. White, 2012. Effects of fire retardants on physical, mechanical, and fire properties of flat-pressed WPCs. Eur. J. Wood Wood Prod., 70: 215-224.
    Direct Link  |  

  118. Ayrilmis, N., J. Benthien and H. Thoemen, 2012. Effects of formulation variables on surface properties of wood plastic composites. Compos. Part B Eng., 43: 325-331.
    Direct Link  |  

  119. Ayrilmis, N., 2012. Enhancement of dimensional stability and mechanical properties of light MDF by adding melamine resin impregnated paper waste. Int. J. Adhes. Adhes., 33: 45-49.
    Direct Link  |  

  120. Ayrilmis, N. and A. Kaymakci, 2012. Reduction of formaldehyde emission from light MDF panels by adding chestnut shell flour. Holzforschung, 66: 443-446.
    Direct Link  |  

  121. Kose, C., E. Terzi, U. Buyuksari, E. Avcı, N. Ayrilmis, S.N. Kartal and Y. Imamura, 2011. Particleboard and MDF panels made from a mixture of wood and pine cones. Resistance to decay fungi and termites under laboratory conditions. Bioresour., 6: 2045-2054.
    Direct Link  |  

  122. Jarusombuti, S., N. Ayrilmis, V. Fueangvivat and P. Bauchongkol, 2011. Effect of thermal treatment of fast growing wood fibers on physical and mechanical properties of light medium density fiberboard. High Temp. Mater. Process., 30: 241-246.
    Direct Link  |  

  123. Jarusombuti, S. and N. Ayrilmis, 2011. Surface characteristics and overlaying properties of flat-pressed wood plastic composites. Eur. J. Wood Prod., 69: 375-382.
    CrossRef  |  Direct Link  |  

  124. Candan, Z., N. Ayrilmis and T. Akbulut, 2011. Dimensional stability performance of fire retardant treated veneer-oriented strandboard composites. Biores., 1: 308-316.

  125. Ayrilmis, N., U. Buyuksarı and T. Dundar, 2011. Utilization of waste pine cone in manufacture of wood plastic composite. J. Appl. Polym. Sci., 117: 2324-2330.

  126. Ayrilmis, N., S. Jarusombuti, V. Fuengwivat and P. Bauchongkol, 2011. Effect of thermal treatment of wood fibers on properties of flat-pressed wood plastic composites. Polym. Degrad. Stab., 96: 818-822.
    CrossRef  |  Direct Link  |  

  127. Ayrilmis, N., S. Jarusombuti, V. Fuengwivat and P. Bauchongkol, 2011. Effect of thermal treatment of rubberwood fibers on physical and mechanical properties of medium density fiberboard. J. Tropic. For. Sci., 23: 10-16.

  128. Ayrilmis, N., S. Jarusombuti, V. Fuengvivat, P. Bauchongkol and R.H. White, 2011. Coir fiber reinforced polypropylene composite panel for automotive interior applications. Fibers polym., 12: 919-926.
    Direct Link  |  

  129. Ayrilmis, N., J. Benthien, H. Theomen and R.H. White, 2011. Properties of flat-pressed wood plastic composites containing fire retardants. J. Appl. Polym. Sci., 122: 3201-3210.
    Direct Link  |  

  130. Ayrilmis, N., 2011. Effect of fire retardants on surface roughness and wettability of wood plastic composite panels. BioResour., 6: 3178-3187.
    Direct Link  |  

  131. Ayrilmis, N. and U. Buyuksari, 2011. Enhancement of dimensional stability of biocomposites containing agricultural waste by heat-treatment method. Drying Tech., 29: 591-598.
    Direct Link  |  

  132. Ayrilmis, N. and S. Jarusombuti, 2011. Flat-pressed wood plastic composite as an alternative to conventional wood based panels. J. Composite Mat., 45: 103-112.
    CrossRef  |  Direct Link  |  

  133. Sen, S., N. Ayrilmis, and Z. Candan, 2010. Fungicide and insecticide properties of cardboard panels made from used beverage carton with veneer overlay. Afr. J. Agric. Res., 5: 159-165.

  134. Jarusombuti, S., N. Ayrilmis, V. Fuengwivat and P. Bauchongkol, 2010. Surface characteristics and overlaying properties of mdf panels made from thermally treated rubberwood fibers. Biores., 5: 968-978.

  135. Buyuksari, U., N. Ayrilmis, E. Avci, and E. Koc, 2010. Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones. Bioresour. Technol., 101: 255-259.
    Direct Link  |  

  136. Ayrilmis, N., Z. Candan, T. Akbulut and O.D. Balkız, 2010. Effect of sanding on surface properties of medium density fiberboard. Drvna Industrija., 61: 175-181.
    Direct Link  |  

  137. Ayrilmis, N., U. Buyuksari, E. Avci and E. Koc, 2010. Effect of pine cone ratio on the wettability and surface roughness of particleboard. Biores., 5: 1824-1833.

  138. Ayrilmis, N., U. Buyuksari and N. As, 2010. Bending strength and modulus of elasticity of wood-based panels at cold and moderate temperatures. Cold Regions Sci. Tech., 63: 40-43.
    CrossRef  |  Direct Link  |  

  139. Ayrilmis, N., 2010. Variations in surface janka hardness and screw withdrawal resistance of post thermally treated of medium density fiberboard. Wood Res. J., 55: 111-116.

  140. Ayrilmis, N. and U. Buyuksari, 2010. Utilization of olive mill sludge in the manufacture of fiberboard. Biores., 5: 1859-1867.

  141. Ayrilmis, N. and U. Buyuksari, 2010. Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite. J. Mat. Sci., 45: 1336-1342.
    CrossRef  |  Direct Link  |  

  142. Terzi, E., C. Kose, U. Buyuksari, E. Avcı, N. Ayrilmis and S.N. Kartal, 2009. Evaluation of possible decay and termite resistance of particleboard containing waste tire rubber. Int. Biodeterior. Biodegrad., 63: 806-809.
    Direct Link  |  

  143. Dundar, T., N. Ayrilmis, Z. Candan and H.T. Sahin, 2009. Dimensional stability fire retardant treated veneer lumber. For. Prod. J., 59: 18-23.

  144. Ayrilmis, N., U. Buyuksari, E. Avci ve and E. Koc., 2009. Utilization of pine (pinus pinea L.) cone in manufacture of wood based composite. For. Ecol. Manage., 259: 65-70.
    Direct Link  |  

  145. Ayrilmis, N., U. Buyuksari and E. Avci, 2009. Utilisation of waste tire rubber as an alternative to wood in manufacture of particleboard. Mater. Manuf. Process, 24: 688-692.

  146. Ayrilmis, N., U. Buyuksarı and E. Avcı, 2009. Utilisation of waste tire rubber as an alternative to wood in manufacture of oriented strandboard. Waste Manage., 29: 2553-2557.

  147. Ayrilmis, N., T.L. Laufenberg ve, J.E. Winandy, 2009. Dimensional stability and creep behavior of heat-treated exterior medium density fiberboard. Eur. J. Wood Wood Prod., 67: 287-295.
    Direct Link  |  

  148. Ayrilmis, N., T. Dundar, Z. Candan and T. Akbulut, 2009. Wettability of fire retardant treated laminated veneer lumber (LVL) manufactured from veneers dried at different temperatures. Biores., 4: 1535-1543.

  149. Ayrilmis, N., E. Avci and U. Buyuksari, 2009. Surface characteristics and hardness of medium density fiberboard containing pine cone. J. Biobased Mat. Bioenerg., 3: 393-400.
    CrossRef  |  Direct Link  |  

  150. Ayrilmis, N. and J.E. Winandy, 2009. Effects of post heat-treatment on surface characteristics and adhesive bonding performance of medium density fiberboard. Mater. Manuf. Process., 24: 594-599.
    Direct Link  |  

  151. Dundar, T., N. Ayrilmis and Z. Candan, 2008. Evaluation of surface roughness of laminated veneer lumber (LVL) made from beech veneers treated various fire-retardants and dried at different temperatures. For. Prod. J., 58: 71-76.

  152. Ayrilmis, N., Z. Candan and S. Hızıroglu, 2008. Physical and mechanical properties of cardboard panels made from used beverage carton with veneer overlay. Mater. Des., 29: 1897-1903.
    Direct Link  |  

  153. Ayrilmis, N., 2008. Effect of compression wood on dimensional stability of medium density fiberboard. Silva Fennica, 42: 285-293.

  154. Akbulut, T. and N. Ayrilmis, 2008. Warping of MDF and particleboard. J. For. Faculty, 58: 81-98.

  155. Kartal, S.N., N. Ayrilmis and Y. Imamura, 2007. Decay and termite resistance of plywood treated with various fire retardants. Build. Environ., 42: 1207-1211.
    Direct Link  |  

  156. Ayrilmis, N., Z. Candan ve and R.H. White, 2007. Physical, mechanical, and fire properties of oriented strandboard with fire retardant treated veneers. Holz Roh Werkst., 65: 449-458.
    Direct Link  |  

  157. Ayrilmis, N., 2007. Effect of panel density on dimensional stability of medium and high density fiberboards. J. Mater. Sci., 42: 8551-8557.

  158. Ayrilmis, N., 2007. Effect of fire-retardants on İnternal bond strength and bond durability of structural fiberboard. Build. Environ., 42: 1200-1206.
    Direct Link  |  

  159. Ayrilmis, N. and J.E. Winandy, 2007. Shear and five-point flexural prorerties of structural plywood treated with various fire-retardants. For. Prod. J., 57: 44-49.

  160. Laufenberg, T., N. Ayrilmis and R. White, 2006. Fire and bending properties of blockboard with fire retardant treated veneers. Holz Roh Werkst, 64: 137-143.
    Direct Link  |  

  161. Gungor, N.M., N. Ayrilmis and R. Kantay, 2006. Properties of LVL made from pterocarya fraxinifolia (lam.) spach. For. Prod. J., 56: 82-85.

  162. Ayrilmis, N., S. Korkut, E. Tanritanir, J.E. Winandy and S. Hiziroglu, 2006. Effect of various fire retardants on surface roughness of plywood. Build. Environ., 41: 887-892.
    CrossRef  |  Direct Link  |  

  163. Akbulut, T. and N. Ayrilmis, 2006. Influence of compression wood on surface roughness and surface absorbtion of medium density fiberboard (MDF). Silva Fennica, 40: 161-167.

  164. Unsal, O. and N. Ayrilmis, 2005. Variability in compression strength and surface roughness of heat-treated eucalyptus (eucalyptus camaldulensis dehn.) wood. J. Wood Sci., 51: 405-409.

  165. Kartal, S.N. and N.Ayrilmis, 2005. Blockboard with boron-treated veneers: laboratory decay and termite resistance tests. Int. biodeterior. Biodegrad., 55: 93-98.
    Direct Link  |  

  166. Ayrilmis, N., S.N. Kartal, T. Laufenberg, J.E. Winandy ve and R.H. White, 2005. Physical and mechanical properties and fire, decay, and termite resistance of treated oriented strandboard. For. Prod. J., 55: 74-81.

  167. Unsal, O. and N. Ayrilmis, 2004. The effect of steaming on equilibrium moisture content in beech wood (fagus orientalis lipsky). For. Prod. J., 54: 90-93.

  168. Goker, Y., T. Akbulut and N. Ayrilmis, 2004. Technological properties of MDF manufactured in Turkey. J. For. Faculty, 54: 13-36.

  169. Akbulut, T., N. Ayrilmis and E. Koc, 2004. Influence of compression wood on physical and mechanical properties of medium density fiberboard (MDF). Wood Res., 49: 17-24.

  170. Ayrilmis, N., 2003. Effect of tree species on some physical properties of MDF. J. For. Faculty, 53: 57-73.

  171. Goker, Y., and N. Ayrilmis, 2002. Performance characteristics and thermal degredataion of wood exposed to fire. J. For. Faculty, 52-53: 1-22.

  172. Ayrilmis, N., 2002. Effect of tree species on some mechanical properties of MDF. J. For. Faculty, 52: 125-146.

  173. Akbulut T., Y. Goker and N. Ayrilmis, 2002. Using of OSB instead of plywood. J. For. Faculty, 52: 65-74.

  174. Akbulut, T. and N. Ayrilmis, 2001. Significant considerations in manufacture of MDF. J. For. Faculty, 51: 25-42.

  175. Goker, Y., N. As, T. Akbulut and N. Ayrilmis, 2000. The technological properties and use of carob (ceratonia siliqua L.)'s wood. J. For. Faculty, 49: 43-58.

  176. Akbulut, T., S. Hiziroglu and N. Ayrilmis, 2000. Surface absorption, surface roughness, and formaldehyde emission of Turkish medium density fiberboard. For. Prod. J., 50: 45-48.
Member since June, 2010