Dr. D. Chandramohan
Associate ProfessorHindustan University, India
Highest Degree
Ph.D. in Mechanical Engineering from Anna University, India
Share this Profile
Area of Interest:
Selected Publications
- Chandramohan, D., B. Vasantha-Srivasan and S.D. Kumar, 2019. Mechanical, moisture absorption and abrasion resistance properties of bamboo–jute–glass fiber composites. J. Bio. Tribo. Corros., 5: 66-66.
Direct Link | - Sathish, T., P. Peryasamy, D. Chandramohan and N. Nagabooshanam, 2018. Modelling K-nearest neighbor technique for the parameter prediction of cryogenic treated tool in surface roughness minimization. Int. J. Mech. Prod. Eng. Res. Dev., .
Direct Link | - Ravikumar, L. and D. Chandramohan, 2017. Flexural test on hybrid biocomposite materials. Indian J. Sci. Technol., 10: 1-5.
CrossRef | Direct Link | - Murali, B., B.V. Ramnath and D. Chandramohan, 2017. Crash test analysis on natural fiber composite materials for head gear. Indian J. Sci. Technol., 10: 1-5.
Direct Link | - Chandramohan, D. and A.J.P. Kumar, 2017. Fibre reinforced composites: A promising material for artificial limp. Data-Enabled Discov. Applic., Vol. 1. 10.1007/s41688-017-0010-1.
CrossRef | Direct Link | - Chandramohan, D. and A.J.P. Kumar, 2017. Experimental data on the properties of natural fiber particle reinforced polymer composite material. Data Brief, 13: 460-468.
CrossRef | Direct Link | - Senthilathiban, A., L.R. Kumar and D. Chandramohan, 2016. Characterization of mechanical seal using hybrid of natural materials. Indian J. Sci. Technol., 9: 1-5.
Direct Link | - Murali, B. and D. Chandramohan, 2015. Chemical treatment on hybrid reinforced composites. J. Chem. Pharm. Res., 7: 1199-1203.
- Murali, B. and D. Chandramohan, 2014. Mechanical behavior of jute/glass fibre composites. Carbon: Sci. Technol., 6: 330-335.
- Murali, B. and D. Chandramohan, 2014. Fabrication of industrial safety helmet by using hybrid composite materials. J. Middle East Applied Sci. Technol., 15: 584-587.
- Murali, B. and D. Chandramohan, 2014. Chemical treatment on hemp/polymer composites. J. Chem. Pharm. Res., 6: 419-423.
- Chandramohanm, D. and B. Murali, 2014. Characterization of kenaf fibre reinforced composites. J. Chem. Pharm. Res., 6: 626-628.
- Chandramohan, D., R. Vijayan, P. Karthikeyan and B. Murali, 2014. Natural fiber reinforced polymer composite materials: An review on natural resources. Int. J. Applied Environ. Sci., 9: 957-968.
- Chandramohan, D., J. Bharanichandar, P. Karthikeyan, R. Vijayan and B. Murali, 2014. Progress of biomaterials in the field of orthopaedics. Am. J. Applied Sci., 11: 623-630.
CrossRef | Direct Link | - Chandramohan, D., 2014. Studies on natural fibre particle reinforced composite material for conservation of natural resources. Adv. Applied Sci. Res., 5: 305-315.
- Chandramohan, D., 2014. Machining of composites-an review. Acad. J. Manuf. Eng., 3: 67-71.
Direct Link | - Chandramohan, D., 2014. Analysis on natural fiber bone plates. Eur. J. Exp. Biol., 4: 323-332.
Direct Link | - Chandramohan, D. and S. Rajesh, 2014. Increasing combusting resistance for hybrid composites. Int. J. Applied Eng. Res., 9: 6979-6985.
- Chandramohan, D. and S. Rajesh, 2014. Characterization of roselle and glass fibre hybrid polymer composites. Pensee J., 76: 140-146.
- Chandramohan, D. and J. Bharanichandar, 2014. Design and fabrication of natural fiber reinforced composites for conservation of natural resources. Int. J. Applied Environ. Sci., 9: 375-384.
- Chandramohan, D. and A. Senthilathiban, 2014. Effects of chemical treatment on jute fiber reinforced composites. Int. J. Applied Chem., 10: 153-162.
- Chandramohan, D and B. Murali, 2014. Machining of natural fiber particle reinforced polymer composite material: Influence of feed, velocity and drill size on thrust force and torque during drilling. Am. J. Applied Sci., 11: 1955-1962.
- Bharanichandar, J., D. Chandramohan and B. Murali, 2014. Natural fiber reinforced polymer composite in synthetic bone grafting-A new approach. J. Middle East Applied Sci. Technol., 16: 588-596.
Direct Link | - Chandramohan, D., 2013. Trends and developments in green composites. Int. J. Adv. Mech. Eng., 3: 36-39.
- Chandramohan, D., 2013. Application of rapid prototyping in tissue engineering. Int. J. Manuf. Sci. Technol., 7: 58-63.
- Chandramohan, D., 2013. Application of laser ignition in internal combustion engines. Int. J. Adv. Therm. Sci. Eng., 4: 11-17.
- Chandramohan, D., 2013. An invention of natural fiber reinforced polymer composite material for bone implant. Int. J. Manuf. Sci. Tech., 4: 19-22.
- Chandramohan, D. and J. Bharanichandar, 2013. Natural fiber reinforced polymer composites for automobile accessories. Am. J. Environ. Sci., 9: 494-504.
CrossRef | Direct Link | - Chandramohan, D. and J. Bharanichandar, 2013. Impact test on natural fiber reinforced polymer composite materials. Carbon: Sci. Technol., 5: 314-320.
Direct Link | - Rino, J.J., D. Chandramohan and D. Jebin, 2012. Research review on corrosion behaviour of metal matrix composites. Int. J. Curr. Res., 4: 179-186.
- Rino, J., D. Chandramohan and K.S. Sucitharan, 2012. An overview on development of aluminium metal matrix composites with hybrid reinforcement. Int. J. Scient. Res., 1: 196-203.
- Prasannasrinivas, R. and D. Chandramohan, 2012. Analysis of natural fiber reinforced composite material for the helmet outer shell. Int. J. Curr. Res., 4: 137-141.
- Chandramohan, D. and K. Marimuthu, 2012. Comparison of mathematical model for the prediction of deflection and flexural rigidity on NFRP composite material application in bone grafting substitutes. J. Adv. Dev. Res., 3: 122-126.
- Chandramohan, D. and K. Marimuthu, 2012. Case study on blood flow over NFRPC bone attached plate using computational fluid dynamics. J. Modern Manuf. Technol., 4: 45-57.
- Venkatesan, S.R., D. Logendran and D. Chandramohan, 2011. Optimization of capacitated vehicle routing problem using PSO. Int. J. Eng. Sci. Technol., 3: 7469-7477.
Direct Link | - Chandramohan, D. and K. Marimuthu, 2011. Tensile and hardness tests on natural fibre reinforced polymer composite material. Int. J. Adv. Eng. Sci. Technol., 6: 97-104.
- Chandramohan, D. and K. Marimuthu, 2011. Rapid prototyping/rapid tooling: A over view and its applications in orthopaedics. Int. J. Adv. Eng. Technol., 2: 435-448.
Direct Link | - Chandramohan, D. and K. Marimuthu, 2011. Natural fibre particle reinforced composite material for bone implant. Eur. J. Scient. Res., 54: 384-406.
- Chandramohan, D. and K. Marimuthu, 2011. Natural fibre bone plates a worldwide patent search report. Int. J. Eng. Sci. Technol., 3: 3663-3669.
- Chandramohan, D. and K. Marimuthu, 2011. Humerus bone development through CT/CAD/RPT. Int. J. Eng. Res. Applic., 1: 134-145.
- Chandramohan, D. and K. Marimuthu, 2011. Drilling of natural fiber particle reinforced polymer composite material. Int. J. Adv. Eng. Res. Stud., 1: 134-145.
Direct Link | - Chandramohan, D. and K. Marimuthu, 2011. Characterization of natural fibers and their application in bone grafting substitutes. Acta Bioeng. Biomech., 13: 77-842011. Characterization of natural fibers and their application in bone grafting substitutes. Acta Bioeng. Biomech., 13: 77-84.
Direct Link | - Chandramohan, D. and K. Marimuthu, 2011. Characterization of natural fibers and their application in bone grafting substitutes. Acta Bioeng. Biomech., 13: 77-84.
Direct Link | - Chandramohan, D. and K. Marimuthu, 2011. Bio composite materials based on bio polymers and natural fibres-contribution as bone implant. Int. J. Adv. Med. Sci. Applied Res., 1: 9-12.
- Chandramohan, D. and K. Marimuthu, 2011. Application of LabVIEW on material testing. Int. J. Eng. Stud., 3: 87-94.
- Chandramohan, D. and K. Marimuthu, 2011. A review on natural fibres. Int. J. Res. Rev. Applied Sci., 8: 194-206.
Direct Link | - Chandramohan, D. and K. Marimuthu, 2011. A research review on natural fibres. Int. J. Curr. Res., 3: 331-337.
- Chandramohan, D., K. Marimuthu, S. Rajesh and M.M. Ravikumar, 2010. Application of advanced design and development techniques in orthopaedics. Int. J. Applied Eng. Res., 5: 1653-1666.
- Chandramohan, D., K. Marimuthu, S. Rajesh and M. Ravikumar, 2010. Applications of CT/CAD/RPT in the futuristic development of orthopaedics and fabrication of plate and screw material from natural fibre particle reinforced composites for humerus bone fixation-a future drift. Malaysian Online J. Educ. Technol., 10: 73-81.
- Chandramohan, D. and K. Marimuthu, 2010. Thrust force, torque in drilling the natural fibre reinforced polymer composite materials and evaluate delamination factor for bone graft substitutes a work of fiction approach. Int. J. Eng. Sci. Technol., 2: 6437-6451.
- Chandramohan, D. and K. Marimuthu, 2010. Contribution of biomaterials to orthopaedics as bone implants: A review. Int. J. Mater. Sci., 5: 399-409.
- Ravikumar, M.M., K. Marimuthu and D. Chandramohan, 2009. Implementation of lean manufacturing in automotive manufacturing plant [TEL]. Proc. Int. J. Applied Eng. Res., 4: 2041-2050.