Dr. Boggarapu Nageswara Rao

Professor
Koneru Lakshmaiah Education Foundation, Deemed to be University, India

Highest Degree
Ph.D. in Mathematics from IIT Bombay, India

My URL
https://livedna.org/91.306

Share this Profile

Biography

Dr. B. Nageswara Rao completed his Ph.D. in Mathematics from IIT Bombay, India. Currently he is working as Professor at KL University, India. He also worked as Scientist/Engineer at ISRO/ VSSC Trivandrum for 33 years. Dr. B. Nageswara received honors includes Holder of the NCC C Certificate (Army Wing), Awarded IIT Bombay Merit Scholarship during post-graduation studies, and Awarded Junior Research Fellowship from the Indian Government Department of Atomic Energy (DAE) and Senior Research Fellowship from the Council of Scientific & Industrial Research (CSIR) to carryout research for Ph.D. at IIT Bombay. He has published 284 articles in journals as well as 43 articles in conferences contributed as author/co-author. Dr. B. Nageswara has successfully supervised 12 PhD, 16 M.Tech and 8 B.Tech students. He is also serving as reviewer in number of journals. He is also working as Research Guide at University of Kerala, Andhra University, and Bharathiar University, Coimbatore. He is member of Aeronautical Society of India, Indian Society of Theoretical and Applied Mechanics, Indian Society for Non-Destructive Testing, and member of Live DNA: A forum of worldwide highly influential Scientists & Scholars and Recognized in Marquis Who’s Who. He also delivered lectures & guided project thesis of the participants of ISRO Induction Training Programmers (IITP), and Key-Note addresses in National Conferences.

Area of Interest:

Physical Science Engineering
Applied Mechanics
Material Engineering
Fracture Mechanics
Pressure Vessels

Selected Publications

  1. Anantha, M.T., T. Buddi and N.R. Boggarapu, 2023. Multi-objective optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31 magnesium alloy. Int. J. Interact. Des. Manuf., 10.1007/s12008-022-01176-6.
    CrossRef  |  Direct Link  |  

  2. Varalakshmi, M., K. Rajyalakshmi and B.N. Rao, 2022. Optimization of process parameters using different statistical designs. J. Eng. Sci. Technol., 17: 523-533.

  3. Tanuja, A.M., A. Kumar, B.N. Rao, 2022. Review on the Application of CGP to Improve AZ31 Mg Alloy Properties. In: Applications of Computational Methods in Manufacturing and Product Design. Lecture Notes in Mechanical Engineering. Springer, Singapore, Deepak, B.B.V.L., D. Parhi, B. Biswal and P.C. Jena, (Eds.), Springer Nature Singapore, pp: 237–246.
    CrossRef  |  Direct Link  |  

  4. Sravanthi, K., V. Mahesh, B.N. Rao, G. Fernandez and L.A. Haiter, 2022. Carbon-filled e-glass fibre-reinforced epoxy composite: Erosive wear properties at an angle of impingement. Adv. Mat. Sci. Eng., 10.1155/2022/8725305.
    CrossRef  |  Direct Link  |  

  5. Sanjeevannavar, M.B., N.R. Banapurmath, M.E.M. Soudagar, V. Atgur and N. Hossain et al., 2022. Performance indicators for the optimal bte of biodiesels with additives through engine testing by the taguchi approach. Chemosphere, Vol. 288. 10.1016/j.chemosphere.2021.132450.
    CrossRef  |  Direct Link  |  

  6. Reddy, C.A.K., B.N. Rao and T. Srinivasan, 2022. A review on heat treated bearing steels for aerospace applications. Matr. Today: Proc., 68: 2038-2040.
    CrossRef  |  Direct Link  |  

  7. Praveen, J.P. and B.N. Rao, 2022. Reinvestigation on assessing the stability of mullagulov tested steel rods under follower forces. Pertanika J. Sci. Technol., 30: 801-811.
    CrossRef  |  Direct Link  |  

  8. Manoj J. Rajale, P. Issac Prasad, B. Nageswara Rao 2022. A review on the heat transfer performance of pulsating heat pipes. Aust. J. Mech. Eng., 10.1080/14484846.2021.2024340.
    CrossRef  |  Direct Link  |  

  9. Koneru, S., A. Srinath and B.N. Rao, 2022. Multiobjective optimization for the optimal heat pipe working parameters based on Taguchi's design of experiments. Heat Trans., 51: 2510-2523.
    CrossRef  |  Direct Link  |  

  10. Kodali, S.P., R.K. Mandava and B.N. Rao, 2022. Development of an Optimal PID Controller for the 4-DOF Manipulator Using Genetic Algorithm. In: Recent Advances in Industrial Production, Agrawal, R., J.K. Jain, V.S. Yadav, V.K. Manupati and L. Varela, (Eds.), Springer Singapore, pp: 23–32.
    CrossRef  |  Direct Link  |  

  11. Kodali, S.P. and B.N. Rao, 2022. An Evolutionary Tomographic Reconstruction Procedure for Defect Identification Using Time-of-Flight of Ultrasound. In: Recent Advances in Industrial Production, Lecture Notes in Mechanical Engineering, Agrawal, R., J.K. Jain, V.S. Yadav, V.K. Manupati and L. Varela, (Eds.), Springer Singapore, pp: 477-484.
    CrossRef  |  Direct Link  |  

  12. Kodali, S.P. and B.N. Rao, 2022. A real-coded genetic algorithm for identification of defects with ultrasound time-of-flight data. In: Proceedings of International Conference on Data Science and Applications, Lecture Notes in Networks and Systems 287, Saraswat, M., S. Roy, C. Chowdhury and A.H. Gandomi, (Eds.), Springer Singapore, pp: 233–241.
    CrossRef  |  Direct Link  |  

  13. Kodali, S.P. and B.N. Rao, 2022. A Multi-stage Evolutionary Tomographic Reconstruction Algorithm Using Ultrasound Time-of-Flight Projections. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. I, Lecture Notes in Mechanical Engineering, Verma, P., O.D. Samuel, T.N. Verma and G. Dwivedi, (Eds.), Springer Singapore, pp: 137–145.
    CrossRef  |  Direct Link  |  

  14. Atgur, V., G. Manavendra, N.R. Banapurmath, B.N. Rao and A.A. Rajhi, et al., 2022. Essence of thermal analysis to assess biodiesel combustion performance. Energies, Vol. 15. 10.3390/en15186622.
    CrossRef  |  Direct Link  |  

  15. Atgur, V., G. Manavendra, G.P. Desai, N.R. Banapurmath, C. Vadlamudi, S. Krishnappa and B.N. Rao, 2022. Thermal behavior of diesel, honge oil methyl ester and ITS B-20 blend in atmospheric air and oxygen. Int. J. Sustainable Eng., 15: 240-250.
    CrossRef  |  Direct Link  |  

  16. Atgur, V., G. Manavendra, G.P. Desai, B.N. Rao, I.M.R. Fattah, B.A. Mohamed, N. Sinaga and H.H. Masjuki, 2022. Thermogravimetric and combustion efficiency analysis of Jatropha curcas biodiesel and its derivatives. Biofuels, 13: 1069-1079.
    CrossRef  |  Direct Link  |  

  17. Atgur, V., G. Manavendra, G.P. Desai and B.N. Rao, 2022. Thermogravitometry and calorimetric evaluation of honge oil methyl ester and its B-20 blend. Cleaner Engineering and Technology, Vol. 6. 10.1016/j.clet.2021.100367.
    CrossRef  |  Direct Link  |  

  18. Atgur, V., G. Manavendra, G.P. Desai and B.N. Rao, 2022. CFD Combustion Simulations and Experiments on the Blended Biodiesel Two-Phase Engine Flows. In: Applications of Computational Fluid Dynamics Simulation and Modeling, Bhattacharyya, S., (Ed.), IntechOpen, pp: 1-17.
    CrossRef  |  Direct Link  |  

  19. Sravanthi, K., V. Mahesh and B.N. Rao, 2021. Influence of micro and nano carbon fillers on impact behavior of GFRP composite materials. Mater. Today Proc., 37: 1075-1078.
    CrossRef  |  Direct Link  |  

  20. Sravanthi, K., V. Mahesh and B.N. Rao, 2021. Influence of carbon particle in polymer matrix composite over mechanical properties and tribology behavior. Arch. Metall. Mater., 66: 1171-1178.
    Direct Link  |  

  21. Sravanthi, K., V. Mahesh and B.N. Rao, 2021. Free vibration analysis of hybrid and non-hybrid GFRP composite wind turbine blade. Des. Eng., 2021: 11560-11567.
    CrossRef  |  Direct Link  |  

  22. Satyanarayana, G., K.L. Narayana and B.N. Rao, 2021. Incorporation of taguchi approach with CFD simulations on laser welding of spacer grid fuel rod assembly. Mater. Sci. Eng. B, Vol. 269. 10.1016/j.mseb.2021.115182.
    CrossRef  |  Direct Link  |  

  23. Praveen, J.P., B.N. Rao, B. Mahaboob, B.V.A. Rao, C. Narayana, and Y. Harnat, 2021. Revisited the critical load assessment of huang et al. on willems tested beck column. Pertanika J. Sci. Technol., 29: 251-262.

  24. Mooli, H., S.R. Seeram, S. Goteti and N.R. Boggarapu, 2021. Optimal weld bead profiles in the conduction mode lbw of thin Ti–6Al–4v alloy sheets. AIMS Mater. Sci., 8: 698-715.
    CrossRef  |  Direct Link  |  

  25. Mooli, H., S.R. Seeram, S. Goteti and N.R. Boggarapu, 2021. Numerical simulations and experimental validation on lbw bead profiles of Ti-6Al-4v alloy. Pertanika J. Sci. Technol., 29: 1609-1625.
    CrossRef  |  Direct Link  |  

  26. Krishnadasan, C.K., N.S. Shanmugam, B.N. Rao and B. Sivasubramonian, 2021. Experimental investigation and numerical simulation on the strength of carbon-fiber-reinforced polymer–metal bolted and bonded interfaces. J. Mater. Eng. Performance, 10.1007/s11665-021-06121-4.
    CrossRef  |  Direct Link  |  

  27. Krishnadasan, C.K., N.S. Shanmugam, B. Sivasubramonian, B.N. Rao and R. Suresh, 2021. Analytical studies and numerical predictions of stresses in shear joints of layered composite panels for aerospace applications. Composite Struct., Vol. 255. 10.1016/j.compstruct.2020.112927.
    CrossRef  |  Direct Link  |  

  28. Kodali, S.P. and B.N. Rao, 2021. Tomographic reconstruction of isotropic materials using genetic algorithms with ultrasound time-of-flight projection data. J. Comput. Applied Res. Mech. Eng., 11: 227-242.
    Direct Link  |  

  29. Danthala, S., S.S. Rao, B.N. Rao and K. Mannepalli, 2021. Analysis of regression techniques for spray painting robot. Turk. J. Physiotherapy Rehabilitation, 32: 654-662.

  30. Danthala, S., S.S. Rao, B.N. Rao and kasiprasad Mannepalli, 2021. Multi-objective optimization with modified taguchi approach to specify optimal robot spray painting process parameters. Int. J. Nonlinear Anal. Appl., 12: 1163-1174.
    Direct Link  |  

  31. Atgur, V., G. Manavendra, G.P. Desai and B.N. Rao, 2021. Thermal characterisation of dairy washed scum methyl ester and its B-20 blend for combustion applications. Int. J. Ambient Energy, 10.1080/01430750.2021.1909651.
    CrossRef  |  Direct Link  |  

  32. Praveen, J.P., B.N. Rao, Y. Harnath, B.V.A. Rao, C. Narayana and B. Mahaboob, 2020. Existence of solution of the nonlinear differential equation in the modelling of eardrum by using homotopy perturbation method. Adv. Math. Sci. J., 9: 4853-4862.
    CrossRef  |  Direct Link  |  

  33. Praveen, J.P., B.N. Rao, B. Mahaboob, C. Rajaiah, Y. Harnath and C. Narayana, 2020. Series decomposition method for asymmetric nonlinear oscillations. Adv. Math. Sci. J., 9: 8069-8076.
    CrossRef  |  Direct Link  |  

  34. Praveen, J.P., B.N. Rao and B.V.A. Rao, 2020. Inconsistent sumudu transform series decomposition method for asymmetric nonlinear oscillations. Test Eng. Manage., 83: 18231-18236.
    Direct Link  |  

  35. Praveen, J.P., B.N. Rao and B.V.A. Rao, 2020. Comments on the application of homotopy analysis method for investigating nonlinear oscillations. Test Eng. Manage., 83: 18225-18230.
    Direct Link  |  

  36. Prasad, P.I. and J.T. Kumar And B.N. Rao, 2020. CFD analysis on performance of chevron type plate heat exchangers. Int. J. Mech. Prod. Eng. Res. Dev., 10: 1481-1498.
    Direct Link  |  

  37. More, G.V., Y.V.H. Rao, P.I. Prasad and B.N. Rao, 2020. Experimental investigation on the effect of compression ratio over emission and performance characteristics of the diesel engine using ternary blends. Int. J. Green Energy, 18: 231-242.
    CrossRef  |  Direct Link  |  

  38. More, G.V., S.R. Koli, Y.V.H. Rao, P.I. Prasad and B.N. Rao, 2020. Effect of compression ratio on compression ignition engine with RUCO biodiesel/ diethyl ether/ diesel fuel blends. Energy Sources, Part A: Recovery, Utilization, Environ. Effects, 10.1080/15567036.2020.1785593.
    CrossRef  |  Direct Link  |  

  39. Miladinovic, S., S. Velickovic, K. Karthik, D. Loknath and B.N. Rao, 2020. Optimal safe factor for surface durability of first central and satellite gear pair in ravigneaux planetary gear set. Test Eng. Manage., 83: 16504-16510.
    Direct Link  |  

  40. Miladinovic, S., S. Velickovic, D. Loknath, K. Karthik and B.N. Rao, 2020. Parameters identification and minimization of safety coefficient for surface durability of internal planetary gear using the modified taguchi approach. Test Eng. Manage., 83: 25108-25116.
    Direct Link  |  

  41. Harish, M., S.S. Rao, B.N. Rao, B. Msahaboob, J.P. Praveen and A.I. Reddy, 2020. Specific optimal AWJM process parameters for Ti-6Al-4V alloy employing the modified taguchi approach. J. Math. Comput. Sci., 11: 292-311.
    Direct Link  |  

  42. ATGUR, V., G. Manavendra, G.P. Desai and B.N. Rao, 2020. Experimental investigation on thermal conductivity and thermal degredation of honge oil methyl ester with B-20 blend. J. Thermal Eng., Vol. 7. .

  43. Ventrapati, T.K. and B.N. Rao, 2019. An efficiency and cost benefit assessments on a typical 600MW coal fired boiler power plant. Int. J. Mech. Prod. Eng. Res. Dev., 9: 201-216.

  44. Satyanarayana, G., K.L. Narayana, B.N. Rao, M.S. Slobodyan, M.A. Elkin and A.S. Kiselev, 2019. Numerical simulation of the processes of formation of a welded joint with a pulsed ND: YAG laser welding of ZR-1% NB alloy. Thermal Eng., 66: 210-218.
    CrossRef  |  Direct Link  |  

  45. Satyanarayana, G., K.L. Narayana and B.N. Rao, 2019. Optimal laser welding process parameters and expected weld bead profile for P92 steel. SN Applied Sci., Vol. 1. 10.1007/s42452-019-1333-3.
    CrossRef  |  Direct Link  |  

  46. Satyanarayana, G., K.L. Narayana and B.N. Rao, 2019. Numerical investigation of temperature distribution and melt pool geometry in laser beam welding of a Zr-1% Nb alloy nuclear fuel rod end cap. Bull. Mater. Sci., 42: 170-178.
    CrossRef  |  Direct Link  |  

  47. Rao, B.N. and K. Rajyalakshmi, 2019. Modified taguchi approach to trace the optimum GMAW process parameters on weld dilution for ST-37 steel plates. J. Test. Eval., 47: 3209-3222.
    Direct Link  |  

  48. Rajyalakshmi, K. and Boggarapu, N.R., 2019. Expected range of the output response for the optimum input parameters utilizing the modified Taguchi approach. Multidiscip. Model. Mater. Struct., 15: 508-522.
    CrossRef  |  Direct Link  |  

  49. Praveen, J.P. and B.N. Rao, 2019. Uncertainties in the periodic solution of a truly non-linear oscillator differential equation using MDTM. Int. J. Applied Comput. Math., Vol. 5. 10.1007/s40819-019-0702-3.
    CrossRef  |  Direct Link  |  

  50. Jalan, S.K., B. Nageswara Rao, S.V.S.N. Murty and S. Gopalakrishnan, 2019. Evaluation of elastic properties for a nanocomposite (reinforced with swcnt agglomerates) utilizing a representative volume element. Trans. Indian Inst.of Metals, 72: 951-967.
    CrossRef  |  Direct Link  |  

  51. Dharmendra, B.V., S.P. Kodali and B.N. Rao, 2019. A simple and reliable Taguchi approach for multi-objective optimization to identify optimal process parameters in nano-powder-mixed electrical discharge machining of INCONEL800 with copper electrode. Heliyon, Vol. 5. 10.1016/j.heliyon.2019.e02326.
    CrossRef  |  Direct Link  |  

  52. Vivek, G., M.I. Khan, P. Naveen and A.V. Vineeth, 2018. Biaxial gain assessment on flawed cylindrical pressure vessels. Int. J. Mech. Prod. Eng. Res. Dev., 1: 233-242.

  53. Satyanarayana, G., K.L. Narayana and N.R. Boggarapu, 2018. Numerical simulations on the laser spot welding of zirconium alloy endplate for nuclear fuel bundle assembly. Lasers Manufact. Mater. Process., 5: 53-70.
    CrossRef  |  Direct Link  |  

  54. Satyanarayana, G., K.L. Narayana and B.N. Rao, 2018. Identification of optimum laser beam welding process parameters for E110 zirconium alloy butt joint based on Taguchi-CFD simulations. Lasers Manufact. Mater. Process., 5: 182-199.
    Direct Link  |  

  55. Rao, B.N., S.N. Murty, A. Sarkar, K.V.A. Chakravarthi and N.T.B.N. Koundinya, 2018. Optimization of hot workability and control of microstructure in 18Ni (M250 grade) maraging steel using processing maps. Mater. Perform. Charact., 7: 547-561.
    Direct Link  |  

  56. Kumar, P.G.S.L. and B.N. Rao, 2018. Development of a simple, reliable and low cost drunken-drive avoiding system for two wheelers. JMSG: Int. Multidis. e-J., 3: 268-274.

  57. Dutta, O.Y. and B.N. Rao, 2018. Investigations on the performance of chevron type plate heat exchangers. Heat Mass Transfer, 54: 227-239.
    Direct Link  |  

  58. Chakravarthi, K.V.A., N.T.B.N. Koundinya, S.N. Murty, D. Sivakumar and B.N. Rao, 2018. Optimization of hot workability and control of microstructure in CF250 grade cobalt-free maraging steel: An approach using processing maps. Metallogr. Microst. Anal., 7: 35-47.
    CrossRef  |  Direct Link  |  

  59. Chakravarthi, K.V.A., N.T.B.N. Koundinya, S.N. Murty and B.N. Rao, 2018. Microstructure, properties and hot workability of M300 grade maraging steel. Defence Technol., 14: 51-58.
    CrossRef  |  Direct Link  |  

  60. Buddi, T., S.K. Singh and B.N. Rao, 2018. Optimum process parameters for plywood manufacturing using soya meal adhesive. Mater. Today: Proc., 5: 18739-18744.
    CrossRef  |  Direct Link  |  

  61. Buddi, T., B.N. Rao, S.K. Singh, R. Purohit and R.S. Rana, 2018. Development and analysis of High Density Poly Ethylene (HDPE) nano SiO2 and wood powder reinforced polymer matrix hybrid nano composites. J. Exp. Nanosci., 13: S24-S30.
    CrossRef  |  Direct Link  |  

  62. Srinivas, G.T., D.R. Kumar, P.V.V.M. Mohan and B. Nageswara Rao, 2017. Efficiency of a coal fired boiler in a typical thermal power plant. Am. J. Mech. Ind. Eng., 2: 32-36.
    CrossRef  |  Direct Link  |  

  63. Sarala, P.L. and B. Nageswara Rao, 2017. Thermal properties of Al2O3-water nanofluids to examine heat transfer enhancement in heat exchangers. Int. J. Control Theory Applic., 10: 87-105.
    Direct Link  |  

  64. Rajanish, C.Y.P.D.P. and B. Nageswara Rao, 2017. On the radiative heat transfer in a viscoelastic boundary layer flow over a stretching sheet. Trans. ASME J. Heat Transfer, Vol. 139, No. 1. 10.1115/1.4034351.
    CrossRef  |  Direct Link  |  

  65. Raisa, M.B. and B. Nageswara Rao, 2017. Performance of AFBC and CFBC boilers in thermal power plants. Int. J. Control Theory Applic., 10: 83-89.
    Direct Link  |  

  66. Praveen, J.P. and B. Nageswara Rao, 2017. Applicability of the MDTM to obtain the periodic solution of the Duffing type equations of motion. Asian J. Math. Comput. Res., 18: 19-27.
    Direct Link  |  

  67. Pradeep, K.R., B. Nageswara Rao, S.M. Srinivasan, K. Balasubramaniam and S. Ahamed, 2017. Influence of core compressibility, flexibility and transverse shear effects on the response of sandwich structures. Am. J. Mech. Ind. Eng., 2: 81-91.
    CrossRef  |  Direct Link  |  

  68. Kumar, K.B. and B. Nageswara Rao, 2017. Essence of the waste heat recovery in the process industries. Int. J. Control Theory Applic., 10: 73-82.
    Direct Link  |  

  69. Kumar, D.R., P.S.S.K. Varma and B. Nageswara Rao, 2017. Optimum drilling parameters of coir fiber-reinforced polyester composites. Am. J. Mech. Ind. Eng., 2: 92-97.
    CrossRef  |  Direct Link  |  

  70. Kalavala, V.M.K., S.S.S. Konduri, P. Mandala, R.R. Manapragada and N.R. Boggarapu, 2017. Development of a notched tensile strength nomograph through finite element modeling of centre-hole 2D C/C laminates. Int. J. Pure Applied Math., 115: 377-382.
    Direct Link  |  

  71. Dutta, O.Y., T. Therisa and B. Nageswara Rao, 2017. Design validation through testing of a double-tube counter-flow heat exchanger. Int. J. Control Theory Applic., 10: 399-409.
    Direct Link  |  

  72. Chakravarthi, K.V.A., N.T.B.N. Koundinya, S.V.S.N. Murty and B. Nageswara Rao, 2017. Microstructural evolution and constitutive relationship of M350 grade maraging steel during hot deformation. J. Mater. Eng. Perform., 26: 1174-1185.
    CrossRef  |  Direct Link  |  

  73. Buddi, T., K. Mahesh, N. Muttil, B. Nageswara Rao, J. Nagalakshmi and S.K. Singh, 2017. Characterization of plywoods produced by various bio-adhesives. Mater. Today: Proc., 4: 496-508.
    CrossRef  |  Direct Link  |  

  74. Sundaresan, S., S. Lekshmi and B. Nageswara Rao, 2016. Fracture strength determination of maraging steel rocket motorcases-A comparative study of analytical and experimental data. Int. J. Pure Eng. Math., 4: 31-42.
    Direct Link  |  

  75. Sahiti, M., M.R. Reddy, B. Joshi, J.P. Praveen and B. Nageswara Rao, 2016. Optimum WEDM process parameters of Incoloy®Alloy800 using Taguchi method. Int. J. Ind. Manuf. Syst. Eng., 1: 64-68.
    CrossRef  |  Direct Link  |  

  76. Sahiti, M., M.R. Reddy, B. Joshi and B. Nageswara Rao, 2016. Application of Taguchi method for optimum weld process parameters of pure aluminum. Am. J. Naval Archit. Mar. Eng., 1: 1-6.
    CrossRef  |  Direct Link  |  

  77. Praveen, J.P. and B. Nageswara Rao, 2016. On the periodic solution of the Helmholtz equations using the modified differential transform method. MAYFEB J. Math., 2: 7-16.
    Direct Link  |  

  78. Kannan, P., K.S. Amirthagadeswaran, T. Christopher and B. Nageswara Rao, 2016. A simplified approach for assessing the leak-before-break for the flawed pressure vessels. Nuclear Eng. Des., 302: 20-26.
    CrossRef  |  Direct Link  |  

  79. Bharathi, P., T.G.L. Priyanka, G.S. Rao and B. Nageswara Rao, 2016. Optimum WEDM process parameters of SS304 using Taguchi method. Int. J. Ind. Manuf. Syst. Eng., 1: 69-72.
    CrossRef  |  Direct Link  |  

  80. Marimuthu, R. and B.N. Rao, 2015. An efficient finite element approach to examine the free vibration characteristics of liquid tankages in space launch vehicles. Meccanica, 50: 1217-1226.
    CrossRef  |  Direct Link  |  

  81. Jalan, S.K., B. Nageswara Rao, S.N. Murty and S. Gopalakrishnan, 2015. Generation of temperature dependent transversely isotropic properties for zigzag and armchair single-walled carbon nanotubes. Trans. Indian Inst. Met., 68: 185-194.
    CrossRef  |  Direct Link  |  

  82. Buddi, T., N. Muttil, B. Nageswara Rao and S.K. Singh, 2015. Development of a soya based adhesive in plywood manufacturing. Mater. Today: Proc., 2: 3027-3031.
    CrossRef  |  Direct Link  |  

  83. Sundaresan, S., P.S. Sreelekshmi, G. Nayak and B.N. Rao, 2014. Studies of the fracture parameters of compact tension specimens made from weld joints of the motor case. Int. J. Math. Sci. Eng. Applic., 8: 119-131.
    Direct Link  |  

  84. Sundaresan, S., G. Nayak, A.P. Beena, C.K. Krishnadasan and B.N. Rao, 2014. Weld characteristics of M250 grade maraging steel in aerospace industry. Int. J. Surface Eng. Mater. Technol., 4: 35-39.

  85. Sundaresan, S. and B.N. Rao, 2014. Stress intensity factor at the initiation of instability by R curve. Applied Mech. Mater., 592-594: 1160-1164.
    Direct Link  |  

  86. Sajikumar, K.S., N.A. Kumar and B.N. Rao, 2014. Application of point stress criterion to assess the bond strength of a single-lap joint. Strength Mater., 46: 518-525.
    CrossRef  |  Direct Link  |  

  87. Pradeep, K.R., B.N. Rao, S.M. Srinivasan and K. Balasubramaniam, 2014. Modal strain energy change ratio for damage identification in honeycomb sandwich structures. Can. J. Basic Applied Sci., 2: 10-24.
    Direct Link  |  

  88. Mutyalarao, M., D. Bharathi, K.L. Narayana and B.N. Rao, 2014. How valid are Sugiyama's experiments? Int. J. Non-Linear Mech. 10.1016/j.ijnonlinmec.2014.12.007.
    CrossRef  |  Direct Link  |  

  89. Mutyalarao, M., D. Bharathi and B.N. Rao, 2014. Equilibrium configurations of cantilever columns under a tip-concentrated subtangential follower force. Can. J. Basic Applied Sci., 2: 46-63.
    Direct Link  |  

  90. Marimuthu, R. and B.N. Rao, 2014. A mixed finite element for evaluation of interlaminar stresses in composite structures. Can. J. Basic Applied Sci., 2: 64-75.
    Direct Link  |  

  91. Franklin, V.A., T. Christopher and B.N. Rao, 2014. Influence of root rotation on delamination fracture toughness of composits. Int. J. Aerospace Eng., VOl. 2014. 10.1155/2014/829698.
    CrossRef  |  Direct Link  |  

  92. Chandu, G.C.R., I.R. Kumar, N. Ramesh and B.N. Rao, 2014. Damage assessment in composites using acoustic emission monitoring. Can. J. Basic Applied Sci., 2: 34-39.
    Direct Link  |  

  93. Singaravelu, J., S. Sundaresan and B.N. Rao, 2013. Application of fracture mechanics to specify the proof load factor for clamp band systems of launch vehicles. J. Mater. Eng. Perform., 22: 926-935.
    CrossRef  |  Direct Link  |  

  94. Satyanarayana, G. and B.N. Rao, 2013. Solar thermal incubator for premature born babies. Can. J. Basic Applied Sci., 1: 26-32.
    Direct Link  |  

  95. Pradeep, K.R., S.M. Srinivasan, B.N. Rao and K. Balasubramaniam, 2013. Study on finite element modeling aspects of delaminated honeycomb sandwich beams. Int. J. Veh. Struct. Syst., 4: 113-117.
    Direct Link  |  

  96. Mutyalarao, M., D. Bharathi and B.N. Rao, 2013. Dynamic stability of cantilever columns under a tip-concentrated subtangential follower force. Math. Mech. Solids, 18: 449-463.
    CrossRef  |  Direct Link  |  

  97. Mutyalarao, M., D. Bharathi and B.N. Rao, 2013. Authors reply to the queries of Milan Batista ”On the uniqueness of large deflections of a uniform cantilever beam under a tip-concentrated rotational load”. Int. J. Non-Linear Mech., 54: 131-132.
    CrossRef  |  Direct Link  |  

  98. Marimuthu, R. and B.N. Rao, 2013. Development of efficient finite elements for structural integrity analysis of solid rocket motor propellant grains. Int. J. Pressure Vessels Piping, 111-112: 131-145.
    CrossRef  |  Direct Link  |  

  99. Kannan, P., T. Christopher and B. Nageswara Rao, 2013. Advanced Finite Element Structural Analysis. In: Current Trends in Engineering Practice, Volume III, Anand, S. (Ed.). Narosa Publishing House, New Delhi, India.

  100. Kannan, P., K.S. Amirthagadeswaram, T. Christopher and B.N. Rao, 2013. Failure of high temperature critical components in combined cycle power plants. J. Failure Anal. Prevent., 13: 409-419.
    CrossRef  |  Direct Link  |  

  101. Jeyakumar, M., T. Christopher, R. Narayanan and B.N. Rao, 2013. Residual stress evaluation in butt-welded IN718 plates. Can. J. Basic Applied Sci., 1: 88-99.
    Direct Link  |  

  102. Jeyakumar, M., T. Christopher and B.N. Rao, 2013. Residual stress evaluation in butt welded joint of ASTM A36 steel plates. Int. J. Electron. Commun. Comput. Eng., 4: 581-587.
    Direct Link  |  

  103. Jayakumar, K., D. Yadav and B. Nageswara Rao, 2013. Moderately large deflection analysis of simply supported piezo-laminated composite plates under uniformly distributed transverse load. Int. J. Non-Linear Mech., 49: 137-144.
    CrossRef  |  Direct Link  |  

  104. Jalan, S.K., B.N. Rao and S. Gopalakrishnan, 2013. Vibrational characteristics of zigzag, armchair and chiral cantilevered single-walled carbon nanotubes. Adv. Composite Lett., 22: 131-142.
    Direct Link  |  

  105. Sundaresan, S., C. Pany, M.K. Sundaresan and B.N. Rao, 2012. Mathematical model for failure load evaluation of maraging steel compact tension specimens. Int. J. Math. Sci. Eng. Appl., 6: 281-297.
    Direct Link  |  

  106. Singaravelu, J., D. Jeyakumar and B.N. Rao, 2012. Reliability and safety assessments of the satellite separation process of a typical launch vehicle. J. Defense Model. Simul. Appl. Methodol. Technol., 9: 369-382.
    CrossRef  |  Direct Link  |  

  107. Singaravelu, J., D. Jeyakumar and B. Nageswara Rao, 2012. Rigid Body Separation Dynamics on Large Strap-on Boosters of Multistage Launch Vehicles. In: Advances in Engineering Research, Volume 1, Petrova, M. (Ed.). Nova Science Publishers Inc., New York, USA., pp: 153-193.

  108. Pradeep, K.R., B.N. Rao, S.M. Srinivasan and K. Balasubramaniam, 2012. Interface fracture assessment on honeycomb sandwich composite DCB specimens. Eng. Fract. Mech., 93: 108-118.
    CrossRef  |  Direct Link  |  

  109. Jalan, S.K., B. NageswaraRao and S. Gopalakrishnan, 2012. Development of empirical relations for the transversely isotropic properties of zigzag, armchair and chiral single-walled carbon nanotubes. Adv. Compos. Lett., 21: 93-99.
    Direct Link  |  

  110. Sharma, V.M.J., K.S. Kumar, B.N. Rao and S.D. Pathak, 2011. Fatigue crack growth of AA2219 under different aging conditions. Mater. Sci. Eng., A, 528: 4040-4049.
    CrossRef  |  Direct Link  |  

  111. Parameshwaranpillai, T., P.R. Lakshminarayanan and B.N. Rao, 2011. Taguchi's approach to examine the effect of drilling induced damage on the notched tensile strength of woven GFR-epoxy composites. Adv. Compos. Mater., 20: 261-275.
    CrossRef  |  Direct Link  |  

  112. Kannan, V.K., V. Murali, A. Rajadurai and B.N. Rao, 2011. Finite element analysis and notched tensile strength evaluation of center-hole 2D carbon/carbon laminates. Adv. Compos. Mater., 20: 289-300.
    CrossRef  |  Direct Link  |  

  113. Jeyakumar, M., T. Christopher, R. Narayanan and B.N. Rao, 2011. Residual stress evaluation in butt-welded steel plates. Indian J. Eng. Mater. Sci., 18: 425-434.
    Direct Link  |  

  114. Brabin, T.A., T. Christopher and B.N. Rao, 2011. Bursting pressure of mild steel cylindrical vessels. Int. J. Press. Vessels Pip., 88: 119-122.
    CrossRef  |  Direct Link  |  

  115. Brabin, T.A., T. Christopher and B.N. Rao, 2011. Assessing the failure of cylindrical pressure vessels due to longitudinal weld misalignment. Steel Grips J. Steel Relat. Mater., 9: 434-439.
    Direct Link  |  

  116. Sundaresan, S., M. Manirajan and B. Nageswara Rao, 2010. On the fracture toughness evaluation in weldments of a maraging steel rocket motor case. Mater. Des., 31: 4921-4926.
    CrossRef  |  Direct Link  |  

  117. Pillai, K.M.C., K.S. Sai, N. Shivakumarswamy, H.R. Nataraja, S.B. Tiwari and B.N. Rao, 2010. Heat transfer in a viscoelastic boundary layer flow through a porous medium. Comput. Mech., 34: 27-37.
    CrossRef  |  Direct Link  |  

  118. Parameshwaranpillai, T., P.R. Lakshminarayanan and B.N. Rao, 2010. Tensile fracture strength of 2124Al-10 Vol.% SiCp composite compact tension specimens. Mater. Des., 31: 2987-2993.
    CrossRef  |  Direct Link  |  

  119. Mutyalarao, M., D. Bharathi and B.N. Rao, 2010. On the uniqueness of large deflections of a uniform cantilever beam under a tip-concentrated rotational load. Int. J. Non-Linear Mech., 45: 433-441.
    CrossRef  |  Direct Link  |  

  120. Kannan, V.K., A. Rajadurai and B.N. Rao, 2010. Residual strength of laminated composites after impact. J. Compos. Mater., 45: 1031-1043.
    CrossRef  |  Direct Link  |  

  121. Kamala Kannan, V., Velamurali, A. Rajadurai and B. Nageswara Rao, 2010. Failure assessment on central-sharp notched carbon/epoxy laminates. Mater. Des., 31: 4348-4355.
    CrossRef  |  Direct Link  |  

  122. Kamala Kannan, V., M. Velumurali, A. Rajadurai and B. Nageswara Rao, 2010. Tension and compression strength evaluation of composite plates with circular holes. J. Reinforced Plastics Composites, 29: 1500-1514.
    CrossRef  |  Direct Link  |  

  123. Aseer Brabin, T., T. Christopher and B. Nageswara Rao, 2010. Finite element analysis of cylindrical pressure vessels having a misalignment in a circumferential joint. Int. J. Pressure Vessels Pip., 87: 197-201.
    CrossRef  |  Direct Link  |  

  124. Kamalakannan, V., M. Velumurali and B. Nageswara Rao, 2010. Modified average stress criterion to predict the fracture strength of various lay-ups of carbon/epoxy laminates. J. Reinforced Plastics Composites, 29: 346-356.
    CrossRef  |  Direct Link  |  

  125. Singaravelu, J., D. Jeyakumar and B. Nageswara Rao, 2009. Taguchi`s approach for reliability and safety assessments in the stage separation process of a multistage launch vehicle. Reliability Eng. Syst. Safety, 94: 1526-1541.
    CrossRef  |  Direct Link  |  

  126. Sharma, V.M.J., K. Sreekumar, B. Nageswara Rao and S.D. Pathak, 2009. Effect of microstructure and strength on the fracture behavior of AA2219 alloy. Mater. Sci. Eng. A, 502: 45-53.
    CrossRef  |  Direct Link  |  

  127. Srinivasa Rao, B., P. Rudramoorthy, S. Srinivas and B. Nageswara Rao, 2008. Effect of drilling induced damage on notched tensile and pin bearing strengths of woven GFR-epoxy composites. Mater. Sci. Eng. A, 472: 347-352.
    CrossRef  |  Direct Link  |  

  128. Rajdurai, S., T. Christopher, G. Thanigaiyarasu and B. Nageswara Rao, 2008. Finite element analysis with an improved failure criterion for composite wind turbine blades. Forschung im Ingenieurwesen, 72: 193-207.
    CrossRef  |  Direct Link  |  

  129. Kamalakannan, V., S.R. Boopathy and B. Nageswara Rao, 2008. Fracture strength of various lay-ups of carbon/epoxy laminates using the modified inherent flaw model. Eng. Fracture Mech., 75: 4834-4843.
    CrossRef  |  Direct Link  |  

  130. Jeyasingh, J.J.V., G. Kothandaraman, P.P. Sinha, B. Nageswara Rao and A. Chennakesava Reddy, 2008. Spherical dome formation by transformation of superplasticity of titanium alloys and titanium matrix composites. Mater. Sci. Eng. A, 478: 397-401.
    CrossRef  |  Direct Link  |  

  131. Jayakumar, K., D. Yadav and B. Nageswara Rao, 2008. Nonlinear free vibration analysis of generic coupled induced strain actuated piezo-laminated beams. Forschung im Ingenieurwesen, 72: 153-162.
    CrossRef  |  Direct Link  |  

  132. Nageswara Rao, B., 2007. An Improved Inherent Flaw Model for Notched Tensile Strength Prediction of Metallic/Composite/Solid Propellant Materials. In: Recent Advances in Composite Materials: Intelligent, Smart, Sustainable and Infrastructural Materials, Srivastava, V.K., M. Singh, N. Banthia and A.A. Mufti (Eds.). Allied Publisher Ltd., New Delhi, India.

  133. Kanaka Raju, K., B. Nageswara Rao and R. Marimuthu, 2007. Hybrid-Stress-Displacement Finite Elements for Viscoelastic Analysis. In: Finite Elements, Mastorakis, N. and O. Martin (Eds.). World Scientific and Engineering Academy and Society, Wisconsin, USA., pp: 43-53.

  134. Jayakumar, K., D. Yadav and B. Nageswara Rao, 2007. Nonlinear vibration analysis for a generic coupled-laminated plate with surface bonded or embedded induced strain actuators. J. Sound Vibrat., 301: 846-863.
    CrossRef  |  Direct Link  |  

  135. Tiwari, S.B., B. Nageswara Rao, H.R. Nataraja and K.S. Sai, 2006. On the stable limit-point of a modified van Der Pol equation. Trends Applied Sci. Res., 1: 379-385.
    CrossRef  |  Direct Link  |  

  136. Swamy, N.S., H.R. Nataraja, K.S. Sai, S.B. Tiwari and B. Nageswara Rao, 2006. Flow of an electrically conducting second-grade fluid under an oscillating rigid moving plate. Trends Applied Sci. Res., 1: 184-193.
    CrossRef  |  Direct Link  |  

  137. Sharma, V.M.J., V. Diwakar, K. Sree Kumar, B. Nageswara Rao and S.D. Pathak, 2006. A simple J-integral approach for fracture toughness assessment on invalid test data of standard CT specimens. Trends Applied Sci. Res., 1: 132-143.
    CrossRef  |  Direct Link  |  

  138. Sai, K.S., N.S. Swamy, H.R. Nataraja, S.B. Tiwari and B. Nageswara Rao, 2006. Unsteady flow of two immiscible fluids under an oscillatory time-dependent pressure gradient in a channel with one porous floor. Trends Applied Sci. Res., 1: 194-203.
    CrossRef  |  Direct Link  |  

  139. Renganathan, K., B. Nageswara Rao and M.K. Jana, 2006. Slump estimation of cylindrical segment grains of a typical rocket motor under vertical storage condition. Trends Applied Sci. Res., 1: 97-104.
    CrossRef  |  Direct Link  |  

  140. Renganathan K., B. Nageswara Rao and M.K. Jana, 2006. Analytical solution for a multi-layer thick cylindrical shell subjected to axial inertia applicable for slump estimations of solid propellant rocket motor grains. Trends Applied Sci. Res., 1: 123-131.
    CrossRef  |  Direct Link  |  

  141. Nageswara Rao, B., D. Jeyakumar, K.K. Biswas, S. Swaminathan and E. Janardhana, 2006. Rigid body separation dynamics for pace launch vehicles. Aeronautical J. R. Aeronautical Soc., 110: 289-302.
    Direct Link  |  

  142. Muthurajan, K.G., K. Sankaranarayanasamy, S.B. Tiwari and B. Nageswara Rao, 2006. Finite element modeling of adhesively bonded joints. Trends Applied Sci. Res., 1: 25-40.
    CrossRef  |  Direct Link  |  

  143. Muthurajan, K.G., K. Sankaranarayanasamy, S.B. Tiwari and B. Nageswara Rao, 2006. Evaluation of carbon/epoxy delamination fracture toughness. Trends Applied Sci. Res., 1: 144-154.
    CrossRef  |  Direct Link  |  

  144. Jeyakumar, D. and B. Nageswara Rao, 2006. Dynamics of satellite separation system. J. Sound Vibrat., 297: 444-455.
    CrossRef  |  Direct Link  |  

  145. Babu, N.S., S.B. Tiwari and B. Nageswara Rao, 2006. Structural and morphological features of graphitised carbon fibres. Trends Applied Sci. Res., 1: 204-213.
    CrossRef  |  Direct Link  |  

  146. Babu, N.S., S.B. Tiwari and B. Nageswara Rao, 2006. Development and validation of processing maps for nickel based powder metallurgy superalloys. Powder Metallurgy, 49: 160-166.
    CrossRef  |  Direct Link  |  

  147. Subhananda Rao, A., G. Venkata Rao and B. Nageswara Rao, 2005. Generation and validation of failure assessment diagram for notched strength prediction of solid propellant tensile specimens. Mater. Sci. Technol., 21: 488-494.
    CrossRef  |  Direct Link  |  

  148. Subhananda Rao, A., G. Venkata Rao and B. Nageswara Rao, 2005. Effect of long-seam mismatch on the burst pressure of maraging steel rocket motor cases. Int. J. Eng. Failure Anal., 12: 325-336.
    CrossRef  |  Direct Link  |  

  149. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2005. Identification of flow instabilities in the processing maps of AISI 304 stainless steel. J. Mater. Process. Technol., 166: 268-278.
    CrossRef  |  Direct Link  |  

  150. Muthurajan, K.G., K. Sankarabnarayanasamy, S.B. Tiwari and B. Nageswara Rao, 2005. Nonlinear vibration analysis of initially stressed thin laminated rectangular plates on elastic foundations. J. Sound Vibrat., 282: 949-969.
    CrossRef  |  Direct Link  |  

  151. Jeyakumar, D., K.K. Biswas and B.N. Rao, 2005. Stage separation dynamic analysis of upper stage of a multistage launch vehicle using retro rockets. Int. J. Math. Comput. Modell., 41: 849-866.
    CrossRef  |  Direct Link  |  

  152. Christopher, T., K. Sankaranarayanasamy and B. Nageswara Rao, 2005. Correlating cryogenic fracture strength using a modified two-parameter method. Eng. Fracture Mech., 72: 475-490.
    CrossRef  |  Direct Link  |  

  153. Babu, N.S., S.B.Tiwari and B. Nageswara Rao, 2005. Modified instability condition for identification of unstable metal flow regions in processing maps of magnesium alloys. Mater. Sci. Technol., 21: 976-984.
    CrossRef  |  Direct Link  |  

  154. Subhananda Rao, A., Y. Krishna and B. Nageswara Rao, 2005. Fracture toughness of nitramine and composite solid propellants. Mater. Sci. Eng., 403: 125-133.
    CrossRef  |  Direct Link  |  

  155. Subhananda Rao, A., Y. Krishna and B. Nageswara Rao, 2004. Comparison of fracture models to assess the notched strength of composite/solid propellant tensile specimens. Mater. Sci. Eng. A, 385: 429-439.
    CrossRef  |  Direct Link  |  

  156. Rao, B.N., 2004. Fracture of Composite Materials. In: Recent Advances in Composite Materials, Srivastava, V.K. and M. Singh (Eds.). Allied Publishers Ltd., New Delhi, pp: 179-184.

  157. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2004. Improved ductile fracture criterion for cold forming of spheroidised steel. J. Materials Process. Technol., 147: 94-101.
    CrossRef  |  Direct Link  |  

  158. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2004. Development and validation of a processing map for Afnor 7020 aluminium alloy. Mater. Sci. Technol., 20: 772-782.
    CrossRef  |  Direct Link  |  

  159. Muthurajan, K.G., K. Sankaranarayanasamy, S.B. Tiwari and B. Nageswara Rao, 2004. Determination of elastic constants from measured natural frequencies of specially orthotropic cantilever plates. Mater. Sci. Technol., 20: 1303-1309.
    CrossRef  |  Direct Link  |  

  160. Madhusudan, B.P., V.R. Rajeev and B. Nageswara Rao, 2004. Comments on the new approach to solution of falkner-skan equation. Trans. ASME J. Pressure Vessel Technol., 126: 404-406.

  161. Jeyasingh, J.J.V. and B. Nageswara Rao, 2004. On the thinning variation of a superplastically formed titanium alloy spherical domes. J. Mater. Process. Technol., 160: 370-373.
    CrossRef  |  Direct Link  |  

  162. Christopher, T., K. Sankaranarayansamy and B. Nageswara Rao, 2004. Fracture behaviour of maraging steel tensile specimens and pressurized cylindrical vessels. Fatigue Fracture Eng. Mater. Struct., 27: 177-186.
    CrossRef  |  Direct Link  |  

  163. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2003. On the relationship between the intrinsic hot workability parameters of DMM and PRM. Scand. J. Metallurgy, 32: 185-193.
    CrossRef  |  Direct Link  |  

  164. Madhusudan, B.P., V.R. Rajeev and B. Nageswara Rao, 2003. Post-buckling of cantilever columns having variable cross-section under a combined load. Int. J. Nonlinear Mech., 38: 1513-1522.
    CrossRef  |  Direct Link  |  

  165. Renganathan, K., B.S.V. Rama Sarma, B. Nageswara Rao and M.K. Jana, 2002. Tensile fracture of a HTPB-based propellant specimens. Mater. Sci. Technol., 18: 1408-1412.
    Direct Link  |  

  166. Rama Sarma, B.S.V., P.K. Govindan Potti and B. Nageswara Rao, 2002. Failure behaviour of an ultra high strength low alloy steel. Mater. Sci. Technol., 18: 787-798.
    CrossRef  |  Direct Link  |  

  167. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2002. On the hot working characteristics of 2124 Al-SiCp metal matrix composites. Adv. Composite Mater., 11: 105-120.
    CrossRef  |  Direct Link  |  

  168. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2002. Development and validation of a processing map for Zirconium alloys. Modell. Simul. Mater. Sci. Eng., 10: 503-503.
    CrossRef  |  Direct Link  |  

  169. Murty, S.V.S.N., B.N. Rao and B.P. Kashyap, 2002. Processing maps for hot deformation of α2 aluminide alloy Ti-24Al-11Nb. J. Mater. Sci., 37: 1197-1201.
    CrossRef  |  Direct Link  |  

  170. Christopher, T., K. Sankaranarayan Samy and B. Nageswara Rao, 2002. Fracture strength of flawed cylindrical pressure vessels under cryogenic temperatures. Int. J. Cryogenics, 42: 661-673.
    CrossRef  |  Direct Link  |  

  171. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2001. On the hot workability of ELI grade titanium alloy Ti-6Al-4V. Zeitschrift Metallkunde, 92: 473-476.
    Direct Link  |  

  172. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2001. Identification of flow instabilities during hot working of powder metallurgy superalloy IN 100. Powder Metallurgy, 44: 165-170.
    CrossRef  |  Direct Link  |  

  173. Narayana Murty, S.V.S., B. Nageswara Rao and B.P. Kashyap, 2001. Hot working characteristics of powder metallurgy NIMONIC AP-1 superalloy. Powder Metallurgy, 44: 267-273.
    CrossRef  |  Direct Link  |  

  174. Govindan Potti, P.K., B. Nageswara Rao and V.K. Srivastava, 2001. Tensile fracture strength of boron/aluminum laminates with holes and slits. Mater. Sci. Eng. A, 301: 244-252.
    CrossRef  |  Direct Link  |  

  175. Govindan Potti, P.K., B. Nageswara Rao and V.K. Srivastava, 2001. Fracture strength of composite laminates containing surface notches. Adv. Composite Mater., 10: 29-37.
    CrossRef  |  Direct Link  |  

  176. Narayana Murty, S.V.S. and B. Nageswara Rao, 1999. Modelling of constitutive equations to describe hot deformation of 99.9% pure aluminium. Mater. Sci. Technol., 15: 599-600.
    Direct Link  |  
Member since June, 2010