Dr. Mohammad Azad Alam

Postdoctoral Researcher
Universiti Teknologi PETRONAS, Malaysia

Highest Degree
Ph.D. in Mechanical Engineering from Universiti Teknologi PETRONAS, Malaysia

My URL
https://livedna.org/91.41310

Share this Profile

Area of Interest:

Engineering
Aerospace Engineering
Mechanical Engineering
Renewable Energy Technology
Hydrogen Energy

Selected Publications

  1. Yusuf, M., A.S. Farooqi, M.A. Alam, L.K. Keong, K. Hellgardt and B. Abdullah, 2022. Response surface optimization of syngas production from greenhouse gases via DRM over high performance Ni-W catalyst. Int. J. Hydrogen Energy, 47: 31058-31071.
    CrossRef  |  Direct Link  |  

  2. Qureshi, F., M. Yusuf, H. Kamyab, S. Zaidi and M.J. Khalil et al., 2022. Current trends in hydrogen production, storage and applications in India: A review. Sustainable Energy Technol. Assess., Vol. 53. 10.1016/j.seta.2022.102677.
    CrossRef  |  Direct Link  |  

  3. Masood, F., N.B.M. Nor, P. Nallagownden, I. Elamvazuthi and R. Saidur et al., 2022. A review of recent developments and applications of compound parabolic concentrator-based hybrid solar photovoltaic/thermal collectors. Sustainability, Vol. 14. 10.3390/su14095529.
    CrossRef  |  Direct Link  |  

  4. Khan, R., H.H. Ya, I. Shah, U.M. Niazi and B.A. Ahmed et al., 2022. Influence of elbow angle on erosion-corrosion of 1018 steel for gas-liquid-solid three phase flow. Materials, Vol. 15. 10.3390/ma15103721.
    CrossRef  |  Direct Link  |  

  5. Azeem, M., H.H. Ya, M.A. Alam, M. Kumar and P. Stabla et al., 2022. Application of filament winding technology in composite pressure vessels and challenges: A review. J. Energy Storage, Vol. 49. 10.1016/j.est.2021.103468.
    CrossRef  |  Direct Link  |  

  6. Alam, M.A., H.H. Ya, M. Azeem, M. Yusuf and I.A. Soomro et al., 2022. Artificial neural network modeling to predict the effect of milling time and TiC content on the crystallite size and lattice strain of Al7075-TiC composites fabricated by powder metallurgy. Crystals, Vol. 12. 10.3390/cryst12030372.
    CrossRef  |  Direct Link  |  

  7. Alam, M.A., H.H. Ya, A. Ahmad, M. Yusuf, M. Azeem and F. Masood., 2022. Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. Mater. Today: Proc., 48: 811-814.
    CrossRef  |  Direct Link  |  

  8. Yusuf, M., A.S. Farooqi, Y.X. Ying, L.K. Keong, M.A. Alam, K. Hellgardt and B. Abdullah, 2021. Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming. Materialwiss. Werkstofftech., 52: 1090-1100.
    CrossRef  |  Direct Link  |  

  9. Yusuf, M., A.S. Farooqi, A.A. Al-Kahtani, M. Ubaidullah and M.A. Alam et al., 2021. Syngas production from greenhouse gases using Ni-W bimetallic catalyst via dry methane reforming: Effect of W addition. Int. J. Hydrogen Energy, 46: 27044-27061.
    CrossRef  |  Direct Link  |  

  10. Shozib, I.A., A. Ahmad, M.S.A. Rahaman, A.M. Abdul-Rani, M.A. Alam, M. Beheshti and I. Taufiqurrahman, 2021. Modelling and optimization of microhardness of electroless Ni-P-TiO2 composite coating based on machine learning approaches and RSM. J. Mater. Res. Technol., 12: 1010-1025.
    CrossRef  |  Direct Link  |  

  11. Sattar, M., A.R. Othman, M. Akhtar, S. Kamaruddin and R. Khan et al., 2021. Curve fitting for damage evolution through regression analysis for the kachanov-rabotnov model to the Norton-bailey creep law of SS-316 material. Materials, Vol. 14. 10.3390/ma14195518.
    CrossRef  |  Direct Link  |  

  12. Masood, F., P. Nallagownden, I. Elamvazuthi, J. Akhter and M.A. Alam, 2021. A new approach for design optimization and parametric analysis of symmetric compound parabolic concentrator for photovoltaic applications. Sustainability, Vol. 13. 10.3390/su13094606.
    CrossRef  |  Direct Link  |  

  13. Masood, F., N.B.M. Nor, P. Nallagownden, I. Elamvazuthi and M.A. Alam et al., 2021. Dataset on the effect of receiver size and acceptance half-angle on the aperture width and height of compound parabolic concentrator for low-concentrating photovoltaic applications using RSM. Data Brief, Vol. 39. 10.1016/j.dib.2021.107630.
    CrossRef  |  Direct Link  |  

  14. Azeem, M., H.H. Ya, M.A. Alam, T.H. Sultan and M. Ali et al., 2021. Macroscale assessment of low-velocity impact on hybrid composite laminates. Materialwiss. Werkstofftech., 52: 1101-1111.
    CrossRef  |  Direct Link  |  

  15. Alam, M.A., M.H. Asoushe, P. Pourhakkak, L. Gritsch, A. Alipour and S. Mohammadi, 2021. Preparation of bioactive polymer-based composite by different techniques and application in tissue engineering: A review. J. Composites Compd., 3: 194-205.
    CrossRef  |  Direct Link  |  

  16. Alam, M.A., H.H. Ya, M. Yusuf, R. Sivraj and O.B. Mamat et al., 2021. Modeling, optimization and performance evaluation of TiC/graphite reinforced Al 7075 hybrid composites using response surface methodology. Materials, Vol. 14. 10.3390/ma14164703.
    CrossRef  |  Direct Link  |  

  17. Alam, M.A., H.H. Ya, M. Azeem, M. Yusuf, S.M. Sapuan and F. Masood, 2021. Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites. Materialwiss. Werkstofftech., 52: 1112-1120.
    CrossRef  |  Direct Link  |  

  18. Akhter, J., S.I. Gilani, H.H. Al-Kayiem, M. Mehmood and M. Ali et al., 2021. Experimental investigation of a medium temperature single-phase thermosyphon in an evacuated tube receiver coupled with compound parabolic concentrator. Front. Energy Res., Vol. 9. 10.3389/fenrg.2021.754546.
    CrossRef  |  Direct Link  |  

  19. Khan, R., H.H. Ya, W. Pao, M.A.A. Majid and T. Ahmed et al., 2020. Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90° elbow pipe in slug flow. Materials, Vol. 13. 10.3390/ma13204601.
    CrossRef  |  Direct Link  |  

  20. Alam, M.A., H.H. Ya, M. Azeem, P.B. Hussain and M.S.B. Salit et al., 2020. Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study. J. Mater. Res. Technol., 9: 14036-14050.
    CrossRef  |  Direct Link  |  
Member since March, 2023