Dr. Yasir Nawab

Professor
National Textile University, Pakistan

Highest Degree
Habilitation in Composite Materials from University of Le Havre, France

My URL
https://livedna.org/92.11445

Share this Profile

Biography

Dr. Yasir Nawab, a PhD in fiber reinforced composite materials from Université de Nantes, and Post-doc & HDR (Habilitation à Diriger des Recherches) from University of Le Havre Normandy, France is currently serving as Dean School of Engineering and Technology, National Textile University, Faisalabad-Pakistan. He has authored over 115 peer-reviewed journal articles, 5 books and more than 50 confer

Area of Interest:

Physical Science Engineering
3D Fabric Structures
Composite Materials
Technical Textiles
Finite Element Analysis

Selected Publications

  1. Umair, M., T. Hussain, K. Shaker, Y. Nawab, M. Maqsood and M. Jabbar, 2015. Effect of woven fabric structure on the air permeability and moisture management properties. J. Text. Inst., 10.1080/00405000.2015.1054124.
    CrossRef  |  Direct Link  |  

  2. Umair, M., N. Yasir, H.M. Mumtaz and S. Khubab, 2015. Development and characterization of 3D woven shaped preforms and their associated composites. J. Reinf. Plast. Compos., 10.1177/0731684415608958.
    CrossRef  |  Direct Link  |  

  3. Shaker, K., U. Muhammad, M. Muhammad and N. Yasir, 2015. A statistical approach for obtaining the controlled woven fabric width. Autex Res. J., 10.1515/aut-2015-0008.
    CrossRef  |  Direct Link  |  

  4. Shaker, K., A. Munir, J. Madiha, S. Salma and N. Yasir, 2015. Bioactive woven flax based composites development and characterization. J. Ind. Text., 10.1177/1528083715591579.
    CrossRef  |  Direct Link  |  

  5. Nawab, Y., P. Casari, N. Boyard, V. Sobotka and F. Jacquemin, 2015. In situ characterization of in-plane chemical shrinkage of thermoset laminated composites using a simple setup. J. Reinf. Plast. Compos., 34: 931-938.
    CrossRef  |  Direct Link  |  

  6. Maqsood, M., Y. Nawab, S.T.A. Hamdani, K. Shaker, M. Umair and W. Ashraf, 2015. Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns. J. Text. Inst.. 10.1080/00405000.2015.1070027.
    CrossRef  |  Direct Link  |  

  7. Maqsood, M., N. Yasir, U.J. Muhammad, S. Khubab and U. Muhammad, 2015. Development of seersucker fabrics using single warp beam and modeling of their stretch-recovery behavior. J. Text. Inst., 15: 148-152.
    CrossRef  |  Direct Link  |  

  8. Maqsood, M., H. Tanveer, N. Yasir, S. Khubab and U. Muhammad, 2015. Prediction of warp and weft yarn crimp in cotton woven fabrics. J. Text. Inst., 106: 1180-1189.
    CrossRef  |  Direct Link  |  

  9. Maqsood, M., H. Tanveer, H. Mumtaz and N. Yasir, 2015. Modelling the effect of elastane linear density, fabric thread density and weave float on the stretch, recovery and compression properties of bi-stretch woven fabrics for compression garments. J. Text. Inst., 10.1080/00405000.2015.1029809.
    CrossRef  |  Direct Link  |  

  10. Maqsood, M and N. Yasir, 2015. Modeling the effect of weave structure and fabric density on mechanical and comfort properties of woven fabrics. Autex Res. J., .

  11. Haji, H., A. Saouab and Y. Nawab, 2015. Simulation of coupling filtration and flow in a dual scale fibrous media. Compos. Part A Appl. Sci. Manuf., 76: 272-280.
    CrossRef  |  Direct Link  |  

  12. Ashraf, W., N. Yasir, M. Muhammad, K. Haritham, A. Habib and A. Shahbaz, 2015. Development of seersucker knitted fabric for better comfort properties and aesthetic appearance. Fibers Polym., 16: 699-701.
    CrossRef  |  Direct Link  |  

  13. Ali, A., K. Shaker, Y. Nawab, M. Ashraf, A. Basit, S. Shahid and M. Umair, 2015. Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material. J. Reinf. Plast. Compos., 34: 2059-2068.
    CrossRef  |  Direct Link  |  

  14. Ahmad, S and N. Yasir, 2015. Influence of fabric parameters on thermal comfort performance of double layer knitted interlock fabrics. Autex Res. J., .

  15. Nawab, Y., N. Boyard and F. Jaquemin, 2014. Effect of pressure and reinforcement type on the volume chemical shrinkage in thermoset resin and composite. J. Compos. Mater., 48: 3191-3199.
    CrossRef  |  Direct Link  |  

  16. Nawab, Y., H.P. Chung, S. Abdelghani, A. Romain, B. Pierre and D. Bertrand, 2014. Shape distortion of carbon/epoxy composite parts during fabrication. Macromol. Symp., 340: 59-64.
    CrossRef  |  Direct Link  |  

  17. Nawab, Y., S. Shahid, N. Boyard and F. Jacquemin, 2013. Chemical shrinkage characterization techniques for thermoset resins and associated composites. J. Mater. Sci., 48: 5387-5409.
    CrossRef  |  Direct Link  |  

  18. Nawab, Y., P. Casari, N. Boyard and F. Jacquemin, 2013. Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment. J. Mater. Sci., 48: 2394-2403.
    CrossRef  |  Direct Link  |  

  19. Nawab, Y., F. Jacquemin, P. Casari, N. Boyard, Y. Borjon-Piron and V. Sobotka, 2013. Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates. Compos. Part B Eng., 50: 144-149.
    CrossRef  |  Direct Link  |  

  20. Nawab, Y., X. Tardif, N. Boyard, V. Sobotka, P. Casari and F. Jacquemin, 2012. Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients. Compos. Sci. Technol., 73: 81-87.
    CrossRef  |  

  21. Nawab, Y., L. Xavier and K. Vladan, 2012. Study of changes in 3D woven multilayer interlock fabric preforms while forming. J. Text. Inst., 103: 1273-1279.
    CrossRef  |  Direct Link  |  

  22. Nawab, Y., J. Frederic, Pascal Casari, B. Nicolas and S. Vincent, 2012. Evolution of chemical and thermal curvatures in thermoset laminated composite plates during the fabrication process. J. Compos. Mater., 10.1177/0021998312440130.
    CrossRef  |  Direct Link  |  
Member since March, 2016