Dr. Hamid Reza Ghazvinloo

Assistant Professor
Qom University of Technology, Iran

Highest Degree
Ph.D. in Materials Science and Engineering from Semnan University, Iran

My URL
https://livedna.org/98.25655

Share this Profile

Area of Interest:

Materials Science and Engineering
Material Science
Metallurgy
Welding
Heat Treatment

Selected Publications

  1. Ghazvinloo, H.R. and M. Tabag, 2022. Microstructural evolutions of weld metal in SAE1080 steel. 8th International Conference On Mechanical Engineering, Materials and Metallurgy, Tbilisi, Georgia, Sep. 1, 2022, pp: 1-4.
    CrossRef  |  Direct Link  |  

  2. Ghazvinloo, H.R. and A. Honarbakhsh-Raouf, 2022. Effect of the robotic GMAW parameters on the HAZ width in HQ130 steel joints. Mater. Sci., 57: 582-587.
    CrossRef  |  Direct Link  |  

  3. Ghazvinloo, H.R., A. Honarbakhsh-Raouf and N. Shadfar, 2021. Influence of friction stir welding variables on surface appearance of joints produced in SSM cast A356 aluminum alloy. J. Mater. Environ. Sci., 12: 1158-1164.
    Direct Link  |  

  4. Ghazvinloo, H.R., A. Honarbakhsh-Raouf and N. Shadfar, 2021. A comprehensive study on the welded joints appearance in GMAW. J. Mater. Environ. Sci., 12: 1320-1331.
    Direct Link  |  

  5. Ghazvinloo, H.R. and A. Honarbakhsh-Raouf, 2021. Numerical modeling of heat-affected zone in the GMAW process. Mater. Sci., 56: 807-813.
    CrossRef  |  Direct Link  |  

  6. Ghazvinloo, H.R., 2020. Impact energy of weld metal in CK45 carbon steel. Iran. J. Energy Environ., 11: 152-156.
    CrossRef  |  Direct Link  |  

  7. Ghazvinloo, H.R. and A. Honarbakhsh-Raouf, 2020. Mechanical strength of the weld metal in CK45 carbon steel. Mater. Sci., 56: 210-213.
    CrossRef  |  Direct Link  |  

  8. Ghazvinloo, H.R. and A. Honarbakhsh-Raouf, 2020. Ductility of welded joints in CK45 carbon steel. Mater. Sci., 56: 359-362.
    CrossRef  |  Direct Link  |  

  9. Ghazvinloo, H.R. and A. Honarbakhsh-Raouf, 2019. Microstructure of the weld metal in CK45 carbon steel. Mater. Sci., 54: 748-752.
    CrossRef  |  Direct Link  |  

  10. Ghazvinloo, H.R. and A. Honarbakhsh-Raouf, 2019. Influence of quenching and partitioning temperature on mechanical properties of steel 37MnSi5. Met. Sci. Heat Treat., 61: 120-123.
    CrossRef  |  Direct Link  |  

  11. Ghazvinloo, H.R., A. Honarbakhsh-Raouf and A.R. Kiani-Rashid, 2018. Mechanical properties of a high Si and Mn steel heat treated by two-step quenching and partitioning. Mater. Sci., 53: 481-487.
    CrossRef  |  Direct Link  |  

  12. Ghazvinloo, H.R. and A. Honarbakhsh-Raouf, 2017. Influence of the temperature of quenching/partitioning on the morphology of 37MnSi5 steel. Mater. Sci., 52: 572-579.
    CrossRef  |  Direct Link  |  

  13. Ghazvinloo, H.R., A. Honarbakhsh-Raouf and E. Borhani, 2016. Morphological characteristics of retained austenite in 0.362C–1.38Si–1.24Mn steel processed by one-step quenching and partitioning. Metallurgist, 60: 758-764.
    CrossRef  |  Direct Link  |  

  14. Ghazvinloo, H.R., A. Honarbakhsh-Raouf and A.R.K. Rashid, 2015. Mechanical properties of a high Si and Mn steel heat treated by one-step quenching and partitioning. Metallurgist, 59: 90-96.
    CrossRef  |  Direct Link  |  
Member since December, 2018