Dr. Yupiter HP Manurung

Dr. Yupiter HP Manurung

Professor
Universiti Teknologi MARA, Shah Alam, Malaysia


Highest Degree
Ph.D. in Manufacturing Technology from Otto von Guericke University Magdeburg, Germany

Share this Profile

Area of Interest:

Engineering
100%
Laser Engineering
62%
Robotics
90%
Welding Technology
75%
Welding Metallurgy
55%

Selected Publications

  1. Taufek, T., M.R.M. Rashid, Y.H.P. Manurung, E. Suryopratom, Z. Mingu and F.H.S. Pengadau, 2019. Material characterization on ss316l manufactured by additive manufacturing: A comparative study to rolling process. Int. J. Eng. Technol., .
    Direct Link  |  
  2. Bauer, A., Y.H. Manurung, J. Sprungk, M. Graf, B. Awiszus and K. Prajadhiana, 2019. Investigation on forming–welding process chain for DC04 tube manufacturing using experiment and FEM simulation. Int. J. Adv. Manufact. Technol., 102: 2399-2408.
    Direct Link  |  
  3. Yahya, O., Y.H. Manurung, M.S. Sulaiman, K.P. Prajadhiana and A.R. Omar et al., 2018. Virtual manufacturing for prediction of martensite formation and hardness value induced by laser welding process using subroutine algorithm in msc marc/mentat. J. Mech. Eng., 15: 107-125.
    Direct Link  |  
  4. Andud, D., M.F. Mat, N. Nordin, Y.H. Manurung, M.U.S. Alam and S. Saidin, 2018. Parameters identification for weld quality, strength and fatigue life enhancement on HSLA (S460G2+ M) using manual GMAW followed by HFMI/PIT. J. Mech. Eng., S15: 205-222.
    Direct Link  |  
  5. Mohamed, M.A., Y.H.P. Manurung, M.K.M. Said, K. Salim and S.W. Zuraine, 2017. The microstructural evaluation and mechanical properties of al 6061-t6 friction stir welding joint with varied parameters. Int. J. Applied Eng. Res., 12: 14471-14477.
  6. Mohamed, M.A. and Y.H. Manurung, 2017. Effect of friction stir welding parameters on fatigue resistance, weld quality and mechanical properties of Al 6061-T651. J. Mech. Eng., 21: 83-99.
  7. Manurung, Y.H., M.A. Mohamed and A.Z. Abidin, 2017. Structural life enhancement on friction stir welded AA6061 with optimized process and HFMI/PIT parameters. Int. J. Adv. Manufact. Technol., 90: 3575-3583.
    Direct Link  |  
  8. Abidin, A.Z., Y.H.P. Manurung, W.E.W. Abdul Rahaman, M.R.B. Abu Bakar, 2017. Fatigue life assessment of 9mm thickness low carbon steel with multi-objective optimized welding process. J. Mech. Eng., S14: 143-153.
  9. Zainir, O.Y., J. Saedon, M. Shahriman, A.R. Omar and W. Kuntjoro et al., 2016. Comparative distortion analysis of welded t-joint between 2d-shell and 3D-solid element using fea with experimental verification. J. Mech. Eng., S15: 99-115.
  10. Buang, M.S., S.A. Abdullah, J. Saedon, Y.H. Manurung and M. Hairuni et al., 2016. Effect of variable geometry on springback of high strength steel materials. Adv. Mater. Res., 1134: 154-159.
    Direct Link  |  
  11. Mohamed, M.A., Y.H. Manurung and M.N. Berhan, 2015. Model development for mechanical properties and weld quality class of friction stir welding using multi-objective Taguchi method and response surface methodology. J. Mech. Sci. Technol., 29: 2323-2331.
    Direct Link  |  
  12. Manurung, Y.H., M.S. Sulaiman, S.K. Abas, G. Tham and E. Haruman, 2015. Investigation on welding distortion of combined butt and T-joints with 9-mm thickness using FEM and experiment. Int. J. Adv. Manufact. Technol., 77: 775-782.
    Direct Link  |  
  13. Muhammad, N., Y.H. Manurung, R. Jaafar, S.K. Abas, G. Tham and E. Haruman, 2013. Model development for quality features of resistance spot welding using multi-objective Taguchi method and response surface methodology. J. Intell. Manufact., 24: 1175-1183.
    Direct Link  |  
  14. Muhammad, N. and Y.H.P. Manurang, 2013. Analysis on development of transverse-sectioned weld zone using fem verified with multipulsed resistance seam welding. J. Eng. Res., 10: 78-86.
    Direct Link  |  
  15. Manurung, Y.H., R.N. Lidam, M.R. Rahim, M.Y. Zakaria and M.R. Redza et al., 2013. Welding distortion analysis of multipass joint combination with different sequences using 3D FEM and experiment. Int. J. Pressure Vessels Piping, 111: 89-98.
    CrossRef  |  Direct Link  |  
  16. Lidam, R.N., Y.H. Manurung, E. Haruman, M.R. Redza, M.R. Rahim et al., 2013. Angular distortion analysis of the multipass welding process on combined joint types using thermo-elastic–plastic FEM with experimental validation. Int. J. Adv. Manufact. Technol., 69: 2373-2386.
    Direct Link  |  
  17. Nadila, P.Z., Y.H.P. Manurung, S.A. Halim, S.K. Abas and G. Tham et al., 2012. Development of stand alone application tool for processing and quality measurement of weld imperfection image captured by μ-focused digital radiography using matlab-based graphical user interface. J. Eng. Res., 9: 64-79.
    Direct Link  |  
  18. Muhammad, N., Y.H. Manurung, M. Hafidzi, S.K. Abas, G. Tham and E. Haruman, 2012. Optimization and modeling of spot welding parameters with simultaneous multiple response consideration using multi-objective Taguchi method and RSM. J. Mech. Sci. Technol., 26: 2365-2370.
    Direct Link  |  
  19. Manurung, Y.H., M.Z.P.Z. Nadila, S.A. Halim, S.K. Abas, G. Tham, E. Haruman and Z. Awaldin, 2012. Development of stand alone application tool for analyzing and reporting weld imperfection captured by mu-focussed digital radiography using MATLAB-based GUI. J. Applied Sci., 12: 612-626.
    CrossRef  |  Direct Link  |  
  20. Lidam, R.N., H.P.M. Yupiter, M.R. Redza, M.R. Rahim and M.S. Sulaiman et al., 2012. Simulation study on multipassed welding distortion of combined joint types using thermo-elastic-plastic FEM. J. Eng. Res., 9: 1-16.
    Direct Link  |  
  21. Haruman, E., Y. Sun, A. Triwiyanto, Y.H.P. Manurung and E.Y. Adesta, 2012. An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace. J. Mater. Eng. Performance, 21: 388-394.
    CrossRef  |  Direct Link  |  
  22. Syn, C.Z., M. Mokhtar, C.J. Feng and Y.H. Manurung, 2011. Approach to prediction of laser cutting quality by employing fuzzy expert system. Exp. Syst. Applic., 38: 7558-7568.
    CrossRef  |  Direct Link  |  
  23. Sulaiman, M.S., Y.H. Manurung, E. Haruman, M.R.A. Rahim and M.R. Redza et al., 2011. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER. J. Mech. Sci. Technol., Vol. 25. 10.1007/s12206-011-0701-8.
    CrossRef  |  Direct Link  |