Dr. Saidur Rahman
My Social Links

Dr. Saidur Rahman

Chair Professor
King Fahd University of Petroleum and Minerals, Saudi Arabia

Highest Degree
Ph.D. in Energy from University of Malaya, Malaysia

Share this Profile



Advertisement
Event

Biography

Dr. Saidur Rahman is currently a Chair Professor at the Center of Research Excellence in Renewable Energy, King Fahd University of Petroleum and Minerals (KFUPM), Saudi Arabia. Prior to joining KFUPM, Dr. Saidur worked with University of Malaya for about 18 years on various capacities. In 2014, Thomson Reuters awarded him highly cited researcher for being among the top 1% researchers for most cited documents in his research field. Dr. Saidur also won highest accumulation citation award from the University of Malaya for the last four years (2011-2014). A number of his papers were listed among the top 25 articles in Science direct published by Elsevier Limited. Dr. Saidur published more than 300 journal papers and majority of them are in top ranking journals. He has total citations of 6800 with an h-index of 42 in Google Scholar. He has supervised more than 60 postgraduate students so far. He secured and managed more than 10 million research grants in Malaysia. He is working on energy efficiency, heat transfer, and renewable energy.

Area of Interest:

Physical Science Engineering
100%
Energy
62%
Thermal Engineering
90%
Thermal Sciences
75%
Nanofluids
55%

Research Publications in Numbers

Books
1
Chapters
3
Articles
385
Abstracts
43

Selected Publications

  1. Zakaria, I., W.H. Azmi, A.M.I. Mamat, R. Mamat, R. Saidur, S.A. Talib and W.A.N.W. Mohamed, 2016. Thermal analysis of Al2O3–water ethylene glycol mixture nanofluid for single PEM fuel cell cooling plate: An experimental study. Int. J. Hydrogen Energy, 41: 5096-5112.
    CrossRef  |  Direct Link  |  
  2. Shahrul, I.M., I.M. Mahbubul, R. Saidur and M.F.M. Sabri, 2016. Experimental investigation on Al2 O3-W, SiO2-W and ZnO-W nanofluids and their application in a shell and tube heat exchanger. Int. J. Heat Mass Transfer, 97: 547-558.
    CrossRef  |  Direct Link  |  
  3. Shadman, F., S. Sadeghipour, M. Moghavvemi and R. Saidur, 2016. Drought and energy security in key ASEAN countries. Renewable Sustainable Energy Reviews, 53: 50-58.
    CrossRef  |  Direct Link  |  
  4. Said, Z., R. Saidur, M.A. Sabiha, A. Hepbasli and N.A. Rahim, 2016. Energy and exergy efficiency of a flat plate solar collector using pH treated Al2O3 nanofluid. J. Cleaner Prod., 112: 3915-3926.
    CrossRef  |  Direct Link  |  
  5. Sadeghinezhad, E., M. Mehrali, R. Saidur, M. Mehrali, S.T. Latibari, A.R. Akhiani and H.S.C. Metselaar, 2016. A comprehensive review on graphene nanofluids: Recent research, development and applications. Energy Convers. Manage., 111: 466-487.
    CrossRef  |  Direct Link  |  
  6. Sabiha, M.A., R. Saidur, R.M. Mostafizur and M. Saad, 2016. Experimental investigation of thermo physical properties of Single walled carbon nanotube. Int. J. Heat Mass Transfer, 93: 862-871.
    CrossRef  |  Direct Link  |  
  7. Rahman, M.M., S. Mekhilef, R. Saidur, B.A.G.M. Mustayen and S.M.A. Rahman, 2016. Mathematical modelling and experimental validation of solar drying of mushrooms. Int. J. Green Energy, 13: 344-351.
    CrossRef  |  Direct Link  |  
  8. Rahman, M.M., H.F. Oztop, A.H. Joarder, R. Saidur, N. Hamzah, K. Al-Salem and T.A. Ibrahim, 2016. Unsteady Analysis of Natural Convection in a Carbon nanotube-water Filled Cavity with Inclined Heater. Numer. Heat Transfer Part, 69: 794-809.
    Direct Link  |  
  9. Mostafizur, R.M., A.R. Abdul Aziz, R. Saidur and M.H.U. Bhuiyan, 2016. Investigation on stability and viscosity of SiO2−CH3OH (methanol) nanofluids. Int. Commun. Heat Mass Transfer, 72: 16-22.
    CrossRef  |  Direct Link  |  
  10. Md. Rabbi, K., S. Saha, S. Mojumder, M.M. Rahman, R. Saidur and T.A. Ibrahim, 2016. Numerical investigation of pure mixed convection in a ferrofluid-filled lid-driven cavity for different heater configurations. Alexandria Eng. J., 55: 127-139.
    CrossRef  |  Direct Link  |  
  11. Mahbubul, I.M., R. Saidur, A. Hepbasli and M.A. Amalina, 2016. Experimental investigation of the relation between yield stress and ultrasonication period of nanofluid. Int. J. Heat Mass Transfer, 93: 1169-1174.
    CrossRef  |  Direct Link  |  
  12. Lee, S.L., R. Saidur, M.F.M. Sabri and T.K. Min, 2016. Molecular dynamic simulation: studying the effects of brownian motion and induced micro-convection in nanofluids. Numer. Heat Transfer-A, 69: 643-658.
    CrossRef  |  Direct Link  |  
  13. Lee, S.L., R. Saidur, M.F.M. Sabri and T.K. Min, 2016. Effects of the particle size and temperature on the efficiency of nanofluids using molecular dynamic simulation. Numer. Heat Transfer, Part A: Appl., 69: 996-1013.
    CrossRef  |  Direct Link  |  
  14. Kibria, M.A., R. Saidur, F.A. Al-Sulaiman and A.A. Maniruzzaman, 2016. Development of a thermal model for a hybrid photovoltaic module and phase change materials storage integrated in buildings. Solar Energy, 124: 114-123.
    CrossRef  |  Direct Link  |  
  15. Hanaei, H., M.A. Khalaji and R. Saidur, 2016. High efficiency of antireflection and self-cleaning coatings with incorporating carbon nanotubes (cnts) into solar cells-a review. Renewable Sustainable Energy Rev., 59: 620-635.
    CrossRef  |  Direct Link  |  
  16. Boharb, A., A. Allouhi, R. Saidur, T. Kousksou, A. Jamil, Y. Mourad and A. Benbassou, 2016. Auditing and analysis of energy consumption of an industrial site in Morocco. Energy, 101: 332-342.
    CrossRef  |  Direct Link  |  
  17. Behroyan, I., S.M. Vanaki, P. Ganesan and R. Saidur, 2016. A comparative study of various CFD models for convective heat transfer of Al2O3nanofluid inside a heated tube. Inte. Commun. Heat Mass Transfer, 70: 27-37.
    CrossRef  |  Direct Link  |  
  18. Barma, M.C., B.D. Long, M.F.M. Sabri and S. Ramesh et al., 2016. Synthesis of C3.21Bi4.79S9 bismuth chalcogenide for thermoelectric applications. Powder Technol., 294: 348-352.
    CrossRef  |  Direct Link  |  
  19. Aunkor, M.T.H., I.M. Mahbubul, R. Saidur and H.S.C. Metselaar, 2016. The green reduction of graphene oxide. RSC Adv., 6: 27807-27828.
    CrossRef  |  Direct Link  |  
  20. Allouhi, A., T. Kousksou, A. Jamil, Y. Agrouaz, T. Bouhal, R. Saidur and A. 2016. Performance evaluation of solar adsorption cooling systems for vaccine preservation in sub-saharan Africa. Appl. Energy, 170: 232-241.
    CrossRef  |  Direct Link  |  
  21. Akikur, R.K., R. Saidur, K.R. Ullah, S.A. Hajimolana, H.W. Ping and M.A. Hussain, 2016. Economic feasibility analysis of a solar energy and solid oxide fuel cell-based cogeneration system in Malaysia. Clean Technol. Environ. Policy, 18: 669-687.
    CrossRef  |  Direct Link  |  
  22. Ahmed, A., A.Q. Al-Amin, A.F. Ambrose and R. Saidur, 2016. Hydrogen fuel and transport system: A sustainable and environmental future. Int. J. Hydrogen Energy, 41: 1369-1380.
    CrossRef  |  Direct Link  |  
  23. Hossain, M.S., R. Saidur, M.F.M. Sabri, Z. Said and S. Hassani, 2015. Spotlight on available optical properties and models of nanofluids: A review. Renewable Sustainable Energy Rev., 43: 750-762.
    CrossRef  |  Direct Link  |  
  24. Ullah, K.R., R. Saidur, H.W. Ping, R.K. Akikur and N.H. Shuvo, 2013. A review of solar thermal refrigeration and cooling methods. Renewable Sustainable Energy Rev., 24: 499-513.
    CrossRef  |  
  25. Sohel, M.R., R. Saidur, N.H. Hassan, M.M. Elias, S.S. Khaleduzzaman and I.M. Mahbubul, 2013. Analysis of entropy generation using nanofluid flow through the circular microchannel and minichannel heat sink. Int. Commun. Heat Mass Transfer, 46: 85-91.
    CrossRef  |  
  26. Sohel, M.R., R. Saidur, M.F.M. Sabri, M. Kamalisarvestani, M.M. Elias and A. Ijam, 2013. Investigating the heat transfer performance and thermophysical properties of nanofluids in a circular micro-channel. Int. Commun. Heat Mass Transfer, 42: 75-81.
    CrossRef  |  
  27. Sarraf, M., B. Rismanchi, R. Saidur, H.W. Ping and N.A. Rahim, 2013. Renewable energy policies for sustainable development in Cambodia. Renewable Sustainable Energy Rev., 22: 223-229.
    CrossRef  |  
  28. Said, Z., M.H. Sajid, R. Saidur, M. Kamalisarvestani and N.A. Rahim, 2013. Radiative properties of nanofluids. Int. Commun. Heat Mass Transfer, 46: 74-84.
    CrossRef  |  Direct Link  |  
  29. Said, Z., M.H. Sajid, M.A. Alim, R. Saidur and N.A. Rahim, 2013. Experimental investigation of the thermophysical properties of Al2O3-nanofluid and its effect on a flat plate solar collector. Int. Commun. Heat Mass Transfer, 48: 99-107.
    CrossRef  |  Direct Link  |  
  30. Said, Z., H.A. Mohammed and R. Saidur, 2013. Mixed convection heat transfer of nanofluids in a lid driven square cavity: A parametric study. Int. J. Mech. Mater. Eng., 8: 48-57.
    Direct Link  |  
  31. Rismanchi, B., R. Saidur, H.H. Masjuki and T.M.I. Mahlia, 2013. Modeling and simulation to determine the potential energy savings by implementing cold thermal energy storage system in office buildings. Energy Convers. Manage., 75: 152-161.
    CrossRef  |  Direct Link  |  
  32. Rezaei, M., M.R. Anisur, M.H. Mahfuz, M.A. Kibria, R. Saidur and I.H.S.C. Metselaar, 2013. Performance and cost analysis of phase change materials with different melting temperatures in heating systems. Energy, 53: 173-178.
    CrossRef  |  
  33. Rahman, S.M.A., R. Saidur and M.N.A. Hawlader, 2013. An economic optimization of evaporator and air collector area in a solar assisted heat pump drying system. Energy Convers. Manage., 76: 377-384.
    CrossRef  |  
  34. Rahman, M.M., S. Parvin, M. Hasanuzzaman, R. Saidur and N.A. Rahim, 2013. Effect of heat-generating solid body on mixed convection flow in a ventilated cavity. Heat Transfer Eng., 34: 1249-1261.
    CrossRef  |  
  35. Rahman, M.M., R. Saidul, S. Mekhilef, M.B. Uddin and A. Ahsan, 2013. Double-diffusive buoyancy induced flow in a triangular cavity with corrugated bottom wall: Effects of geometrical parameters. Int. Commun. Heat Mass Transfer, 45: 64-74.
    CrossRef  |  Direct Link  |  
  36. Rahman, M.M., H.F. Oztop, R. Saidur, S. Mekhilef and K. Al-Salem, 2013. Finite element solution of MHD mixed convection in a channel with a fully or partially heated cavity. Comput.Fluids, 79: 53-64.
    CrossRef  |  Direct Link  |  
  37. Mohammed, Y.S., A.S. Mokhtar, N. Bashir and R. Saidur, 2013. An overview of agricultural biomass for decentralized rural energy in Ghana. Renewable Sustainable Energy Rev., 20: 15-25.
    CrossRef  |  
  38. Mekhilef, S., S.Z. Faramarzi, R. Saidur and Z. Salam, 2013. The application of solar technologies for sustainable development of agricultural sector. Renew. Sustainable Energy Rev., 18: 583-594.
    CrossRef  |  Direct Link  |  
  39. Mahbubul, I.M., S.A. Fadhilah, R. Saidur, K.Y. Leong and M.A. Amalina, 2013. Thermophysical properties and heat transfer performance of Al2O3/R-134a nanorefrigerants. Int. J. Heat Mass Transfer, 57: 100-108.
    CrossRef  |  
  40. Mahbubul, I.M., R. Saidur and M.A. Amalina, 2013. Influence of particle concentration and temperature on thermal conductivity and viscosity of Al2O3/R141b nanorefrigerant. Int. Commun. Heat Mass Transfer, 43: 100-104.
    CrossRef  |  
  41. Mahbubul, I.M., A. Kamyar, R. Saidur and M.A. Amalina, 2013. Migration Properties of TiO2 Nanoparticles during the Pool Boiling of Nanorefrigerants. Ind. Eng. Chem. Res., 52: 6032-6038.
    CrossRef  |  
  42. Madlool, N.A., R. Saidur, N.A. Rahim, 2013. Thermodynamic analysis of waste heat recovery in the clinker cooling system of cement industry. Energy Edu. Sci. Technol., 30: 759-774.
  43. Madlool, N.A., R. Saidur, N.A. Rahim and M. Kamalisarvestani, 2013. An overview of energy savings measures for cement industries. Renew. Sustainable Energy Rev., 19: 18-29.
    CrossRef  |  Direct Link  |  
  44. Madlool, N.A., R. Saidur and N.A. Rahim, 2013. Effect of operational parameters on the energetic and exergetic analysis of a clinker cooling in a cement industry. Jokull J., 63: 369-381.
  45. Low, W.Y., J.A. Aziz, N.R.N. Idris and R. Saidur, 2013. Electrical model to predict current-voltage behaviours of lithium ferro phosphate batteries using a transient response correction method. J. Power Sources, 221: 201-209.
    CrossRef  |  
  46. Leong, K.Y., R.Saidur, T.M.I. Mahlia and Y.H. Yau, 2013. Predicting size reduction of shell and tube heat recovery exchanger operated with nanofluids based coolants and its associated energy saving. Energy Educ. Sci. Technol. Part A: Energy Sci. Res., 30: 1-14.
  47. Khaleduzzaman, S.S., I.M. Mahbubul, I.M. Shahrul and R. Saidur, 2013. Effect of particle concentration, temperature and surfactant on surface tension of nanofluids. Int. Commun. Heat Mass Transfer, 49: 110-114.
    CrossRef  |  
  48. Khairul, M.A., R. Saidur, M.M. Rahman, M.A. Alim, A. Hossain and Z. Abdin, 2013. Heat transfer and thermodynamic analyses of a helically coiled heat exchanger using different types of nanofluids. Int. J. Heat Mass Transfer, 67: 398-403.
    CrossRef  |  
  49. Kamyar, A., K.S. Ong and R. Saidur, 2013. Effects of nanofluids on heat transfer characteristics of a two-phase closed thermosyphon. Int. J. Heat Mass Transfer, 65: 610-618.
    CrossRef  |  
  50. Kamalisarvestani, M., R. Saidur, S. Mekhilef and F.S. Javadi, 2013. Performance, materials and coating technologies of thermochromic thin films on smart windows. Renewable Sustainable Energy Rev., 26: 353-364.
    CrossRef  |  
  51. Javadi, F.S., S. Sadeghipour, R. Saidur, G. BoroumandJazi, B. Rahmati, M.M. Elias and M.R. Sohel, 2013. The effects of nanofluid on thermophysical properties and heat transfer characteristics of a plate heat exchanger. Int. Commun. Heat Mass Transfer, 44: 58-63.
    CrossRef  |  
  52. Javadi, F.S., R. Saidur and M. Kamalisarvestani, 2013. Investigating performance improvement of solar collectors by using nanofluids. Renewable Sustainable Energy Rev., 28: 232-245.
    CrossRef  |  
  53. Javadi, F.S., B. Rismanchi, M. Sarraf, O. Afshar and R. Saidur et al., 2013. Global policy of rural electrification. Renew. Sustainable Energy Rev., 19: 402-416.
    CrossRef  |  Direct Link  |  
  54. Javadi, F.S. and R. Saidur, 2013. Energetic, economic and environmental impacts of using nanorefrigerant in domestic refrigerators in Malaysia. Energy Convers. Manage., 73: 335-339.
    CrossRef  |  
  55. Islam, M.R., S. Mekhilef and R. Saidur, 2013. Progress and recent trends of wind energy technology. Renewable Sustainable Energy Rev., 21: 456-468.
    CrossRef  |  
  56. Ferdous A., Al Amin, M. Hasanuzzaman and R. Saidur, 2013. Alternative energy resources in Bangladesh and future prospect. Renewable Sustainable Energy Rev., 25: 698-707.
  57. Faizal, M., R. Saidur, S. Mekhilef and M.A. Alim, 2013. Energy, economic and environmental analysis of metal oxides nanofluid for flat-plate solar collector. Energy Convers. Manage., 76: 162-168.
    CrossRef  |  
  58. Elias, M.M., M. Miqdad, I.M. Mahbubul, R. Saidur and M. Kamalisarvestani et al., 2013. Effect of nanoparticle shape on the heat transfer and thermodynamic performance of a shell and tube heat exchanger. Int. Commun. Heat Mass Transfer, 44: 93-99.
    CrossRef  |  Direct Link  |  
  59. BoroumandJazi, G., B. Rismanchi and R. Saidur, 2013. Technical characteristic analysis of wind energy conversion systems for sustainable development. Energy Convers. Manage., 69: 87-94.
    CrossRef  |  Direct Link  |  
  60. BoroumandJazi, G., B. Rismanchi and R. Saidur, 2013. A review on exergy analysis of industrial sector. Renewable Sustainable Energy Rev., 27: 198-203.
    CrossRef  |  
  61. Borhanazad, H., S. Mekhilef, R. Saidur and G. Boroumandjazi, 2013. Potential application of renewable energy for rural electrification in Malaysia. Renewab. Energy, 59: 210-219.
    CrossRef  |  Direct Link  |  
  62. Billah, M.M., M.M. Rahman, M.A. Razzak, R. Saidur and S. Mekhilef, 2013. Unsteady buoyancy-driven heat transfer enhancement of nanofluids in an inclined triangular enclosure. Int. Communi. Heat Mass Transfer, 49: 115-127.
    CrossRef  |  Direct Link  |  
  63. Atabani, A.E., R. Saidur, S. Mekhilef and A.S. Silitonga, 2013. Energy Economical and Environmental Analysis of Industrial Boilers using Economizers. Int. J. Energy Eng., 3: 33-38.
    Direct Link  |  
  64. Anisur, M.R., M.H. Mahfuz, M.A. Kibria, R. Saidur and I.H.S.C. Metselaar et al., 2013. Curbing global warming with phase change materials for energy storage. Renew. Sustainable Energy Rev., 18: 23-30.
    CrossRef  |  Direct Link  |  
  65. Anisur, M.R., M.A. Kibria, M.H. Mahfuz, R. Saidur and I.H.S.C. Metselaar, 2013. Analysis of a thermal energy storage system for air cooling-heating application through cylindrical tube. Energy Convers. Manage., 76: 732-737.
    CrossRef  |  
  66. Alim, M.A., Z. Abdin, R. Saidur, A. Hepbasli, M.A. Khairul and N.A. Rahim, 2013. Analyses of entropy generation and pressure drop for a conventional flat plate solar collector using different types of metal oxide nanofluids. Energy Build., 66: 289-296.
    CrossRef  |  Direct Link  |  
  67. Ali, M.B., R. Saidur, M. Hasanuzzaman and T.A. Ward, 2013. Energy and emission analysis in the malaysian food industries. Environ. Prog. Sustainable Energy, 32: 777-783.
    CrossRef  |  
  68. Akikur, R.K., R. Saidur, H.W. Ping and K.R. Ullah, 2013. Comparative study of stand-alone and hybrid solar energy systems suitable for off-grid rural electrification: A review. Renewable Sustainable Energy Rev., 27: 738-752.
    CrossRef  |  
  69. Abdin, Z., M.A. Alim, R. Saidur, M.R. Islam, W. Rashmi, S. Mekhilef and A. Wadi, 2013. Solar energy harvesting with the application of nanotechnology. Renewable Sustainable Energy Rev., 26: 837-852.
    CrossRef  |  
  70. Saidur, R., T.C. Meng, Z. Said, M. Hasanuzzaman and A. Kamyar, 2012. Evaluation of the effect of nanofluid-based absorbers on direct solar collector. Int. J. Heat Mass Transfer, 55: 5899-5907.
    CrossRef  |  Direct Link  |  
  71. Saidur, R., S. Mekhilef, M.B. Ali, A. Safari and H.A. Mohammed, 2012. Applications of variable speed drive (VSD) in electrical motors energy savings. Renewable Sustainable Energy Rev., 16: 543-550.
    CrossRef  |  Direct Link  |  
  72. Saidur, R., M.T. Sambandam, M. Hasanuzzaman, D. Devaraj, S. Rajakarunakaran and M.D. Islam, 2012. An energy flow analysis in a paper-based industry. Clean Technol. Environ. Policy, 14: 905-916.
    CrossRef  |  Direct Link  |  
  73. Saidur, R., M.T. Sambandam, M. Hasanuzzaman, D. Devaraj and S. Rajakarunakaran, 2012. An analysis of actual energy savings in an Indian cement industry through an energy efficiency index. Int. J. Green Energy, 9: 829-840.
    CrossRef  |  
  74. Saidur, R., M. Rezaei, W.K. Muzammil, M.H. Hassan, S. Paria and M. Hasanuzzaman, 2012. Technologies to recover exhaust heat from internal combustion engines. Renewable Sustainable Energy Rev., 16: 5649-5659.
    CrossRef  |  
  75. Saidur, R., M. Hasanuzzaman and N.A. Rahim, 2012. Energy, economic and environmental analysis of the Malaysian industrial compressed-air systems. Clean Technol. Environ. Policy, 14: 195-210.
    CrossRef  |  Direct Link  |  
  76. Saidur, R., G. BoroumandJazi, S. Mekhlif and M. Jameel, 2012. Exergy analysis of solar energy applications. Renewable Sustainable Energy Rev., 16: 350-356.
    CrossRef  |  Direct Link  |  
  77. Saidur, R., G. BoroumandJazi, S. Mekhilef and H.A. Mohammed, 2012. A review on exergy analysis of biomass based fuels. Renewable Sustainable Energy Rev., 16: 1217-1222.
    CrossRef  |  Direct Link  |  
  78. Rismanchi, B., R. Saidur, H.H. Masjuki and T.M.I. Mahlia, 2012. Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy Build., 53: 117-126.
    Direct Link  |  
  79. Rismanchi, B., R. Saidur, H.H. Masjuki and T.M.I. Mahlia, 2012. Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy Build., 50: 347-354.
    CrossRef  |  
  80. Rismanchi, B., R. Saidur, H.H. Masjuki and T.M.I. Mahlia, 2012. Cost-benefit analysis of using cold thermal energy storage systems in building applications. Energy Procedia, 14: 493-498.
    CrossRef  |  Direct Link  |  
  81. Rismanchi, B., R. Saidur, G. BoroumandJazi and S. Ahmed, 2012. Energy, exergy and environmental analysis of cold thermal energy storage (CTES) systems. Renewable Sustainable Energy Rev., 16: 5741-5746.
    CrossRef  |  
  82. Rahman, M.M., S. Parvin, N.A. Rahim, M.R. Islam, R. Saidur and M. Hasanuzzaman, 2012. Effects of reynolds and prandtl number on mixed convection in a ventilated cavity with a heat-generating solid circular block. Appl. Math. Modell., 36: 2056-2066.
    CrossRef  |  Direct Link  |  
  83. Rahman, M.M., S. Parvin, N.A. Rahim, M. Hasanuzzaman and R. Saidur, 2012. Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder. Heat Transfer-Asian Res., 41: 339-353.
    CrossRef  |  Direct Link  |  
  84. Rahman, M.M., M.M. Billah, N.A. Rahim, R. Saidur and M. Hasanuzzaman, 2012. Finite element simulation of magnetohydrodynamic mixed convection in a double-lid driven enclosure with a square heat-generating block. J. Heat Transfer, Vol. 134. 10.1115/1.4006010.
    CrossRef  |  Direct Link  |  
  85. Rahman, M.M., M.M. Billah, M. Hasanuzzaman, R. Saidur and N.A. Rahim, 2012. Heat transfer enhancement of nanofluids in a lid-driven square enclosure. Numer. Heat Transfer Part, 62: 973-991.
    CrossRef  |  Direct Link  |  
  86. Rahman, M.M., H.F. Oztop, N.A. Rahim, R. Saidur and K. Al-Salem et al., 2012. Computational analysis of mixed convection in a channel with a cavity heated from different sides. Int. Commun. Heat Mass Transfer, 39: 78-84.
    CrossRef  |  Direct Link  |  
  87. Rahman, M.M., H.F. Oztop, A. Ahsan, R. Saidur, K. Al-Salem and N.A. Rahim, 2012. Laminar mixed convection in inclined triangular enclosures filled with water based Cu nanofluid. Ind. Eng. Chem. Res., 51: 4090-4100.
    CrossRef  |  Direct Link  |  
  88. Rahim, N.A., R. Saidur, K.H. Solangi, M. Othman and N. Amin, 2012. Survey of grid-connected photovoltaic inverters and related systems. Clean Technol. Environ. Policy, 14: 521-533.
    CrossRef  |  
  89. Oztop, H.F., M.M. Rahman, A. Ahsan, M. Hasanuzzaman, R. Saidur, K. Al-Salem and N.A. Rahim, 2012. MHD natural convection in an enclosure from two semi-circular heaters on the bottom wall. Int. J. Heat Mass Transfer, 55: 1844-1854.
    CrossRef  |  Direct Link  |  
  90. Mohammed, H.A., G. Bhaskaran, N.H. Shuaib, H.I. Abu-Mulaweh and R. Saidur, 2012. Thermal and hydrodynamic performance analysis of circular microchannel heat exchanger utilizing nanofluids. Int. J. Numer. Methods Heat Fluid Flow, 22: 907-927.
    CrossRef  |  Direct Link  |  
  91. Mohammed, H.A., A.A. Al-Aswadi, M.Z. Yusoff and R. Saidur, 2012. Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophys. Aeromech., 19: 33-52.
    CrossRef  |  Direct Link  |  
  92. Mekhilef, S., R. Saidur and M. Kamalisarvestani, 2012. Effect of dust, humidity and air velocity on efficiency of photovoltaic cells. Renewable Sustainable Energy Rev., 16: 2920-2925.
    CrossRef  |  Direct Link  |  
  93. Mekhilef, S., R. Saidur and A. Safari, 2012. Comparative study of different fuel cell technologies. Renewable Sustainable Energy Rev., 16: 981-989.
    CrossRef  |  Direct Link  |  
  94. Mekhilef, S., A. Safari, W.E.S. Mustaffa, R. Saidur, R. Omar and M.A.A. Younis, 2012. Solar energy in Malaysia: Current state and prospects. Renewable Sustainable Energy Rev., 16: 386-396.
    CrossRef  |  Direct Link  |  
  95. Mahbubul, I.M., R. Saidur and M.A. Amalina, 2012. Investigation of viscosity of R123-TIO2 nanorefrigerant. Int. J. Mech. Mater. Eng., 7: 146-151.
    Direct Link  |  
  96. Madlool, N.A., R. Saidur, N.A. Rahim, M.R. Islam and Hossian, 2012. An exergy analysis for cement industries: An overview. Renewable Sustainable Energy Rev., 16: 921-932.
    CrossRef  |  Direct Link  |  
  97. Madlool, N.A., R. Saidur, H.H. Mohammed, K.H. Solangi and N.A. Rahim, 2012. Energy savings measures for clinker production in cement industry. Adv. Mater. Res., 347-353: 3120-3125.
    CrossRef  |  Direct Link  |  
  98. Madlool, N.A., R. Saidur and N.A. Rahim, 2012. Investigation of waste heat recovery in cement industry: A case study. Int. J. Eng. Technol., 4: 665-667.
    CrossRef  |  Direct Link  |  
  99. Leong, K.Y., R. Saidur, T.M.I. Mahlia and Y.H. Yau, 2012. Performance investigation of nanofluids as working fluid in a thermosyphon air preheater. Int. Communi. Heat Mass Transfer, 39: 523-529.
    CrossRef  |  
  100. Leong, K.Y., R. Saidur, T.M.I. Mahlia and Y.H. Yau, 2012. Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants. Int. J. Heat Mass Transfer, 55: 808-816.
    CrossRef  |  
  101. Leong, K.Y., R. Saidur, T.M.I. Mahlia and Y.H. Yau, 2012. Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature. Int. Communi. Heat Mass Transfer, 39: 1169-1175.
    CrossRef  |  Direct Link  |  
  102. Leong, K.Y., R. Saidur, M. Khairulmaini, Z. Michael and A. Kamyar, 2012. Heat transfer and entropy analysis of three different types of heat exchangers operated with nanofluids. Int. Commun. Heat Mass Transfer, 39: 838-843.
    CrossRef  |  Direct Link  |  
  103. Kamyar, A., R. Saidur and M. Hasanuzzaman, 2012. Application of Computational Fluid Dynamics (CFD) for nanofluids. Int. J. Heat Mass Transfer, 55: 4104-4115.
    CrossRef  |  
  104. Islam, M.R., N.A. Rahim, K.H. Solangi and R. Saidur, 2012. Assessing wind energy potentiality for selected sites in Malaysia. Energy Educ. Sci. Technol. Part A Energy Sci. Res., 29: 611-626.
    Direct Link  |  
  105. Ijam, A., R. Saidur and P. Ganesan, 2012. Cooling of minichannel heat sink using nanofluids. Int. Commun. Heat Mass Transfer, 39: 1188-1194.
    CrossRef  |  
  106. Ijam, A. and R. Saidur, 2012. Nanofluid as a coolant for electronic devices (cooling of electronic devices). Appl. Therm. Eng., 32: 76-82.
    CrossRef  |  
  107. Hasanuzzaman, M., R. Saidur and N.A. Rahim, 2012. Analysis of energy and exergy of an annealing furnace. Appl. Mech. Mater., 110-116: 2156-2162.
    CrossRef  |  Direct Link  |  
  108. Hasanuzzaman, M., N.A. Rahim, M. Hosenuzzaman, R. Saidur, I.M. Mahbubul and M.M. Rashid, 2012. Energy savings in the combustion based process heating in industrial sector. Renewable Sustainable Energy Rev., 16: 4527-4536.
    CrossRef  |  
  109. Hasanuzzaman, M., H.F. Oztop, M.M. Rahman, N.A. Rahim, R. Saidur and Y. Varol, 2012. Magnetohydrodynamic natural convection in trapezoidal cavities. Int. Commun. Heat Mass Transfer, 39: 1384-1394.
    CrossRef  |  
  110. Fayaz, H., R. Saidur, N. Razali, F.S. Anuar, A.R. Saleman and M.R. Islam, 2012. An overview of hydrogen as a vehicle fuel. Renewable and Sustainable Energy Rev., 16: 5511-5528.
    CrossRef  |  
  111. BoroumandJazi, G., R. Saidur, B. Rismanchi and S. Mekhilef, 2012. A review on the relation between the energy and exergy efficiency analysis and the technical characteristic of the renewable energy systems. Renewable Sustainable Energy Rev., 16: 3131-3135.
    CrossRef  |  Direct Link  |  
  112. Bonab, R.S. and R. Saidur, 2012. Clean automotive technology: Hydraulic hybrid vehicles (HHVs). Appl. Mech. Mater., 165: 12-15.
    CrossRef  |  Direct Link  |  
  113. Bhuiya, M.M.K., J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar and B. Salam et al., 2012. Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts. Int. Commun. Heat Mass Transfer, 39: 94-101.
    CrossRef  |  Direct Link  |  
  114. Bhuiya, M.M.K., J.U. Ahamed, M.A.R. Sarkar, B. Salam and H.H. Masjuki et al., 2012. Heat transfer and pressure drop characteristics in turbulent flow through a tube. Exp. Heat Transfer, 25: 301-322.
    CrossRef  |  Direct Link  |  
  115. Ahamed, J.U., R. Saidur, H.H. Masjuki and M.A. Sattar, 2012. Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator. Energy Educ. Sci. Technol. Part A Energy Sci. Res., 29: 597-610.
    Direct Link  |  
  116. Ahamed, J.U., R. Saidur, H.H. Masjuki and M.A. Sattar, 2012. An analysis of energy, exergy and sustainable development of a vapor compression refrigeration system using hydrocarbon. Int. J. Green Energy, 9: 702-717.
    CrossRef  |  Direct Link  |  
  117. Ahamed, J.U., N.A. Madlool, R. Saidur, M.I. Shahinuddin, A. Kamyar and H.H. Masjuki, 2012. Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters. Energy, 46: 664-674.
    CrossRef  |  
  118. Afshar, O., R. Saidur, M. Hasanuzzaman and M. Jameel, 2012. A review of thermodynamics and heat transfer in solar refrigeration system. Renewable Sustainable Energy Rev., 16: 5639-5648.
    CrossRef  |  
  119. Abdullah, M.A., A.H.M. Yatim, C.W. Tan and R. Saidur, 2012. A review of maximum power point tracking algorithms for wind energy systems. Renewable Sustainable Energy Rev., 16: 3220-3227.
    CrossRef  |  Direct Link  |  
  120. Thirugnanasambandam, M., M. Hasanuzzaman, R. Saidur, M.B. Ali, S. Rajakarunakaran, D. Devaraj and N.A Rahim, 2011. An analysis of electrical motors load factors and energy savings in an Indian cement industry. Energy, 36: 4307-4314.
    CrossRef  |  Direct Link  |  
  121. Solangi, K.H., M.R. Islam, R. Saidur, N.A. Rahim and H. Fayaz, 2011. A review on global solar energy policy. Renewable Sustainable Energy Rev., 15: 2149-2163.
    CrossRef  |  Direct Link  |  
  122. Saidur, R., T.M.I. Mahlia and M. Hasanuzzaman, 2011. Developing energy performance standard, label and test procedures and impacts analysis for commercial chillers. Energy Educ. Sci. Technol. Part A, 27: 175-190.
  123. Saidur, R., S.N. Kazi, M.S. Hossain, M. M. Rahman and H.A. Mohammed, 2011. A review on the performance of nanoparticles suspended with refrigerants and lubricating oils in refrigeration systems. Renewable Sustainable Energy Rev., 15: 310-323.
    CrossRef  |  Direct Link  |  
  124. Saidur, R., N.A. Rahim, K.H, Solangi and M.R Islam, 2011. Environmental impact of wind energy. Renewable Sustainable Energy Rev., 15: 2423-2430.
    Direct Link  |  
  125. Saidur, R., M.S. Hossain, M.R. Islam, H. Fayaz and H.A. Mohammed, 2011. A review on kiln system modeling. Renewable Sustainable Energy Rev., 15: 2487-2500.
    Direct Link  |  
  126. Saidur, R., M. Hasanuzzaman, T.M.I. Mahlia, N.A Rahim and H.A. Mohammed, 2011. Chillers energy consumption, energy savings and emission analysis in an institutional buildings. Energy, 36: 5233-5238.
    Direct Link  |  
  127. Saidur, R., K.Y. Leong and H.A. Mohammed, 2011. Application and challenges of nanotechnology. Renewable Sustainable Energy Rev., 15: 1646-1668.
  128. Saidur, R., E.T. Elcevvadi, S. Mekhilef, A. Safari and H.A. Mohammed, 2011. An overview of different distillation methods for small scale applications. Renewable Sustainable Energy Rev., 15: 4756-4764.
    CrossRef  |  Direct Link  |  
  129. Saidur, R., E.A. Abdelaziz, A. Demirbas and M.S. Hossain, 2011. A review on biomass as a fuel for boilers. Renewable Sustainable Energy Rev., 15: 2262-2289.
    CrossRef  |  Direct Link  |  
  130. Saidur, R., A.E. Atabani and S. Mekhilef, 2011. A review on electrical and thermal energy for industries. Renewable Sustainable Energy Rev., 15: 2073-2086.
    CrossRef  |  Direct Link  |  
  131. Saidur, R., 2011. Energy savings and emission reductions in industrial boilers. Therm. Sci., 15: 707-721.
    Direct Link  |  
  132. Saidur, R. and Y.K. Lai, 2011. Nanotechnology in vehicle's weight reduction and associated energy savings. Energy Educ. Sci. Technol., 26: 87-101.
  133. Saidur, R. and T.M.I. Mahlia, 2011. Impacts of energy efficiency standard on motor energy savings and emission reductions. Clean Technol. Environ. Policy, 13: 103-109.
    CrossRef  |  Direct Link  |  
  134. Rahman, M.M., S. Parvin, R. Saidur and NA. Rahim, 2011. Magnetohydrodynamic mixed convection in a horizontal channel with an open cavity. Int. Commun. Heat Mass Transfer, 38: 184-193.
    CrossRef  |  Direct Link  |  
  135. Rahman, M.M., R Saidur and N.A. Rahim, 2011. Conjugate effect of joule heating and magneto-hydrodynamic double-diffusive mixed convection in a horizontal channel with an open cavity. Int. J. Heat Mass Transfer, 54: 3201-3213.
    CrossRef  |  Direct Link  |  
  136. Rahman, M.M., N.A. Rahim, S. Saha, M.M. Billah, R. Saidur and A. Ahsan, 2011. Optimization of mixed convection in a lid-driven enclosure with a heat generating circular body. Numer. Heat Transfer, Part A: Applic., 60: 629-650.
    CrossRef  |  Direct Link  |  
  137. Rahman, M.M., M.M. Billah, N.A. Rahim, N. Amin, R. Saidur and M. Hasanuzzaman, 2011. A Numerical model for the simulation of double-diffusive natural convection in a right-angled triangular solar collector. Int. J. Renewable Energy Res., 1: 14-18.
    Direct Link  |  
  138. Rahman, M.M., M.A.H. Mamun and R. Saidur, 2011. Analysis of magnatohydrodynamic mixed convection and joule heating in lid-driven cavity having a square block. J. Chin. Instit. Eng., 34: 585-595.
  139. Rahman, M.M., H.F. Oztop, R. Saidur, N.A. Rahim and K. Al-Salem, 2011. MHD mixed convection with joule heating effect in a lid-driven cavity with a heated semi-circular source using finite element technique. Numer. Heat Transfer, 60: 543-560.
    CrossRef  |  Direct Link  |  
  140. Mohammed, H.A., N.I. Om, N.H. Shuaib, A.K. Hussein and R. Saidur, 2011. The application of nanofluids on three dimensional mixed convection heat transfer in equilateral triangular duct. Int. J. Heat Technol., 29: 3-12.
    Direct Link  |  
  141. Mohammed, H.A., N.I. Om, N.H. Shuaib and R. Saidur, 2011. Numerical investigation of combined convective of nanofluids flow in a vertical rectangular duct considering radiation effects. Heat Transfer-Asian Res., 40: 448-463.
  142. Mohammed, H.A., G. Bhaskaran, N.H. Shuaib and R. Saidur, 2011. Numerical study of heat transfer enhancement of counter nanofluids flow in rectangular microchannel heat exchanger. J. Superlattices Microstruct., 50: 215-233.
    CrossRef  |  Direct Link  |  
  143. Mohammed, H.A., A.A. Al-aswadi, N.H. Shuaib and R. Saidur, 2011. Convective heat transfer and fluid flow study over a step using nanofluids: A review. Renewable Sustainable Energy Rev., 15: 2921-2939.
    Direct Link  |  
  144. Mohammadnejad, M., M. Ghazvini, F.S. Javadi and R. Saidur, 2011. Estimating the exergy efficiency of engine using nanolubricants. Energy Educ. Sci. Technol. Part A, 27: 447-454.
    Direct Link  |  
  145. Mekhilef, S., S. Siga and R. Saidur, 2011. A review on palm oil biodiesel as a source of renewable fuel. Renewable Sustainable Energy Rev., 15: 1937-1949.
    CrossRef  |  Direct Link  |  
  146. Mekhilef, S., R. Saidur, A. Safari and W.E.S.B. Mustaffa, 2011. Biomass energy in Malaysia: Current state and prospects. Renewable Sustainable Energy Rev., 15: 3360-3370.
    Direct Link  |  
  147. Mekhilef, S., R. Saidur and A. Safari, 2011. A review on solar energy use in industries. Renewable Sustainable Energy Rev., 15: 1777-1790.
    CrossRef  |  Direct Link  |  
  148. Mahlia, Y.M.I., R. Saidur, P.A.A. Yanti and H. H. Masjuki, 2011. Role of energy guide labels in consumers purchase decision for household electrical appliances. Energy Educ. Sci. Technol. Part A, 27: 95-104.
  149. Mahlia, T.M.I., B.N. Taufiq, K.P. Ong and R. Saidur, 2011. Exergy analysis for day lighting, electric lighting and space cooling systems for a room space in a tropical climate. Energy Build., 43: 1675-1688.
    CrossRef  |  Direct Link  |  
  150. Mahbubul, I.M., R. Saidur and M.A. Amalina, 2011. Latest developments on the viscosity of nanofluids. Int. J. Heat Mass Trans., 4: 874-885.
    CrossRef  |  Direct Link  |  
  151. Madlool, N.A., R. Saidur, M.S. Hossain and N.A. Rahim, 2011. A critical review on energy use and savings in the cement industries. Renewable Sustainable Energy Rev., 15: 2402-2460.
    CrossRef  |  Direct Link  |  
  152. Islam, M.R., R. Saidur and N.A. Rahim, 2011. Assessment of wind energy potentiality at Kudat and Labuan, Malaysia using weibull distribution function. Energy, 36: 985-992.
  153. Hossain, M.S., R. Saidur, H. Fayaz, M.M Rahman, N. A. Rahim and M.R. Islam, 2011. Review on solar water heater collector and thermal energy performance of circulating pipe. Renewable Sustainable Energy Rev., 15: 3801-3812.
    CrossRef  |  Direct Link  |  
  154. Hasanuzzaman, M., R. Saidur and N.A. Rahim, 2011. Energy, exergy and economic analysis of an Annealing Furnace. Int. J. Phys. Sci., 6: 1257-1266.
    Direct Link  |  
  155. Hasanuzzaman, M., R. Saidur and H.H. Masjuki, 2011. Effects of different variables on moisture transfer of household refrigerator-freezer. Energy Educ. Sci. Technol. Part A, 27: 401-418.
  156. Hasanuzzaman, M., N.A. Rahim, R. Saidur and S.N. Kazi, 2011. Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36: 233-240.
    CrossRef  |  Direct Link  |  
  157. Ghadimi, A., R. Saidur and H.S.C. Metselaar, 2011. A Review of nanofluid stability properties and characterization in stationary conditions. Int. J. Heat Mass Transfer, 54: 4051-4068.
    CrossRef  |  Direct Link  |  
  158. Billah, M.M., M.M. Rahman, U.M. Sharif, N.A. Rahim, R. Saidur and M. Hasanuzzaman, 2011. Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder. Int. Commun. Heat Mass Transfer, 38: 1093-1103.
    CrossRef  |  Direct Link  |  
  159. Billah, M.M., M.M. Rahman, R. Saidur and M. Hasanuzzaman, 2011. Simulation of MHD mixed convection heat transfer enhancement in a double lid-driven obstructed enclosure. Int. J. Mech. Mater. Eng., 6: 18-30.
    Direct Link  |  
  160. Bhaskaran, G., H.A. Mohammed, N.H. Shuaib and R. Saidur, 2011. Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: A review. Renewable Sustainable Energy Rev., 15: 1502-1512.
    CrossRef  |  Direct Link  |  
  161. Atabani, A.E., R. Saidur, A.S. Silitonga and T.M.I. Mahlia, 2011. Energy Economical and Environmental Analysis of Industrial Boilers Using VSD. Appl. Mech. Mater., 110-116: 3223-3233.
    CrossRef  |  Direct Link  |  
  162. Ali, M.M. and R. Saidur, 2011. Nanofluid as a coolant for electronic devices (Cooling of electronic devices). Applied Therm. Eng., 31: 19-24.
    Direct Link  |  
  163. Ali, M.B., R. Saidur and M.S. Hossain, 2011. A review on emission analysis in cement industries. Renewable Sustainable Energy Rev., 15: 2252-2261.
    Direct Link  |  
  164. Ahamed, J.U., R. Saidur, H.H. Masjuki, S. Mekhilef, M.B. Ali and M.H. Furqon, 2011. An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39: 7922-7929.
    CrossRef  |  Direct Link  |  
  165. Ahamed, J.U., R. Saidur, H.H. Masjuki and S. Mehjabin, 2011. Prospect of hydrocarbon uses based on exergy analysis in the vapor compression refrigeration system. Int. J. Renewable Energy Res., 1: 68-71.
  166. Ahamed, J.U., R. Saidur and H.H. Masjuki, 2011. A review on exergy analysis of vapor compression refrigeration system. Renewable Sustainable Energy Rev., 15: 1593-1600.
    Direct Link  |  
  167. Abdelaziz, E.A., R. Saidur and S. Mekhilef, 2011. A review on energy saving strategies in industrial sector. Renewable Sustainable Energy Rev., 15: 150-168.
    CrossRef  |  Direct Link  |  
  168. Whaad, M., N.M. Adam, S.M. Sapuan and R. Saidur, 2010. Effect of selected shading devices on office room temperature. Int. J. Mech. Mater. Eng., 5: 236-243.
    Direct Link  |  
  169. Saidur, R., N.A. Rahim and M. Hasanuzzaman, 2010. A review on compressed air energy use and energy savings. Renewable Sustainable Energy Rev., 14: 1135-1153.
    Direct Link  |  
  170. Saidur, R., M.R Islam, N.A. Rahim, and K.H, Solangi, 2010. A review on global wind energy policy. Renewable Sustainable Energy Rev., 14: 1744-1762.
    CrossRef  |  Direct Link  |  
  171. Saidur, R., M. Hasanuzzaman, S. Yogeswaran, H.A. Mohammed and M.S. Hossain, 2010. An end-use energy analysis in a Malaysian public hospital. Energy, 35: 4780-4785.
    CrossRef  |  Direct Link  |  
  172. Saidur, R., M. Hasanuzzaman and N.A. Rahim, 2010. Energy use, energy savings and environmental analysis of industrial boilers and compressors. Int. J. Therm. Environ. Eng., 1: 29-36.
  173. Saidur, R., J.U. Ahmed and H.H. Masjuki, 2010. Energy, exergy and economic analysis for industrial boilers for Malaysia. Energy Policy, 38: 2188-2197.
    CrossRef  |  Direct Link  |  
  174. Saidur, R., E.A. Abdelaziz, M. Hasanuzzaman, and M.A.H. Mamun, 2010. A study of energy efficiency, economic and environmental benefits of a cooling tower. Int. J. Mech. Mater. Eng., 5: 87-94.
    Direct Link  |  
  175. Saidur, R., 2010. Energy, economics and environmental analysis for chillers in office buildings. Energy Educ. Sci. Technol. Part A, 25: 1-6.
  176. Saidur, R., 2010. A review on electrical motors energy use and energy savings. Renewable Sustainable Energy Rev., 14: 877-898.
    Direct Link  |  
  177. Saidur, R. and Y.K. Lai, 2010. Parasitic energy savings in engines using nanolubricants. Energy Educ. Sci. Technol. Part A, 26: 61-74.
    Direct Link  |  
  178. Saidur, R. and T.M.I. Mahlia, 2010. Energy, economic and environmental benefits of using high efficiency motors to replace standard motors for the Malaysian industries. Energy Policy, 38: 4617-4625.
    Direct Link  |  
  179. Saidur, R. and S. Mekhilef, 2010. Energy use, energy savings and emission analysis in the Malaysian rubber producing industries. Applied Energy, 87: 2746-2758.
    CrossRef  |  Direct Link  |  
  180. Rahman, M.M., M.M. Billah, M.A.H. Mamun, R. Saidur and M. Hasanuzzaman, 2010. Reynolds and prandtl numbers effects on mhd mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block. Int. J. Mech. Mater. Eng., 5: 163-170.
  181. Rahman, M.M., M.A.H. Mamun, M.M. Billah and R. Saidur, 2010. Natural convection flow in a square cavity with internal heat generation and a flush mounted heater on a side wall. J. Naval Archit. Mar. Eng., 7: 37-50.
    CrossRef  |  Direct Link  |  
  182. Mohammed, H.A., A. Campo and R. Saidur, 2010. Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli. Int. Commun. Heat Mass Transfer, 37: 739-747.
    CrossRef  |  Direct Link  |  
  183. Mamun, M.A.H., T.R. Tanim, M.M. Rahman, R. Saidur and S. Nagata, 2010. Mixed convection analysis in trapezoidal cavity with a moving lid. Int. J. Mech. Mater. Eng., 5: 18-28.
    Direct Link  |  
  184. Mamun, M.A.H., M.M. Rahman, M.M. Billah and R. Saidur, 2010. A numerical study on the effect of a heated hollow cylinder on mixed convection in a ventilated cavity. Int. Commun. Heat Mass Transfer, 37: 1326-1334.
    CrossRef  |  
  185. Mahlia, T.M.I., R. Saidur, M. Husnawan, H.H. Masjuki and M. A. Kalam, 2010. An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Educ. Sci. Technol. Part A, 26: 1-11.
  186. Mahlia, T.M.I., R. Saidur, L.A. Memon, N.W.M. Zulkifli and H.H. Masjuki, 2010. A review on fuel economy standard for motor vehicles with the implementation possibilities in Malaysia. Renewable Sustainable Energy Rev., 14: 3092-3099.
    CrossRef  |  Direct Link  |  
  187. Mahlia, T.M.I. and R. Saidur, 2010. A review on test procedure, energy efficiency standards and energy labels for room air conditioners and refrigerator-freezers. Renewable Sustainable Energy Rev., 14: 1888-1900.
    Direct Link  |  
  188. Leong, K.Y., R. Saidur, S.N. Kazi and A.H. Mamun, 2010. Performance investigation of an automotive car radiator operated with nanofluid based coolants (Nanofluid as a coolant in a radiator). Applied Therm. Eng., 30: 2685-2692.
    CrossRef  |  Direct Link  |  
  189. Jahirul, M.I., R. Saidur and H.H. Masjuki, 2010. Predictability of Artificial Neural Network (ANN) in performance prediction of a retrofitted CNG engine. Int. J. Mech. Mater. Eng., 5: 268-275.
    Direct Link  |  
  190. Jahirul, M.I., H.H. Masjuki, R. Saidur, M.A. Kalam, M.H. Jayed and M.A. Wazed, 2010. Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Therm. Eng., 30: 2219-2226.
    CrossRef  |  Direct Link  |  
  191. Islam, M.R., R. Saidur, N.A. Rahim and K.H. Solangi, 2010. Usage of solar energy and its status in Malaysia. Eng. e-Trans., 5: 6-10.
    Direct Link  |  
  192. Hasan, M.M., A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki and M. Hamdi, 2010. Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Opt. Mater., 32: 690-695.
  193. Hasan, M.M., A.S.M.A. Haseeb, H.H. Masjuki, R. Saidur and M. Hamdi, 2010. Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase TiO2 films. Arabian J. Sci. Eng., 35: 147-156.
    Direct Link  |  
  194. Hasan, M.M., A.S.M.A. Haseeb, H.H. Masjuki and R. Saidur, 2010. Adhesion and wear behavior of nanostructured titanium oxide thin films. Int. J. Mech. Mater. Eng., 5: 5-10.
    Direct Link  |  
  195. Gunnasegaran, P., H.A. Mohammed, N.H. Shuaib and R. Saidur, 2010. The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes. Int. Commun. Heat Mass Transfer, 37: 1078-1086.
    CrossRef  |  Direct Link  |  
  196. Ahamed, J.U., R. Saidur and H.H. Masjuki, 2010. Thermodynamic performance analysis of R-600 and R-600a as refrigerant. Eng. e-Transaction, 5: 11-18.
    Direct Link  |  
  197. Ahamed, J.U., M.M.K. Bhuiya, R. Saidur, H.H. Masjuki, M.A.R. Sarkar, A.S.M. Sayem and M. Islam, 2010. Forced convection heat transfer performance of porous twisted tape insert. Eng. e-Transaction, 5: 67-79.
    Direct Link  |  
  198. Saidur, R., N.A. Rahim, H.W. Ping, M.I. Jahirul, S. Mekhilef and H.H. Masjuki, 2009. Energy and emission analysis for industrial motors in Malaysia. Energy Policy, 37: 3650-3658.
    CrossRef  |  
  199. Saidur, R., N.A. Rahim, H.H. Masjuki, S. Mekhilef, H.W. Ping and M.F., Zamaluddin, 2009. End use energy analysis in the Malaysian industrial sector. Energy, 34: 153-158.
    CrossRef  |  Direct Link  |  
  200. Saidur, R., M.A. Sattar, H.H. Masjuki and M.Y. Jamaluddin, 2009. Greenhouse gas emissions from refrigeration equipment in Malaysia. Energy Environ., 20: 533-551.
    CrossRef  |  Direct Link  |  
  201. Saidur, R., M. Hasanuzzaman, M.M. Hasan and H.H. Masjuki, 2009. Overall thermal transfer value of residential buildings in Malaysia. J. Applied Sci., 9: 2130-2136.
    CrossRef  |  Direct Link  |  
  202. Saidur, R., M. Hasanuzzaman and H.H. Masjuki, 2009. Performance of an improved solar car ventilator. Int. J. Mech. Mater. Eng., 4: 24-34.
  203. Saidur, R., 2009. Energy consumption, energy savings and emission analysis in Malaysian office buildings. Energy Policy, 37: 4104-4113.
    CrossRef  |  
  204. Rahman, M.M., M.A.H. Mamun, R. Saidur and S. Nagata, 2009. Effect of a heat conducting horizontal circular cylinder on MHD mixed convection in a lid-driven cavity along with joule heating. Int. J. Mech. Mater. Eng., 4: 256-265.
  205. Jayed, M.H., H.H. Masjuki, R. Saidur, M.A. Kalam, and M.I. Jahirul, 2009. Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia. Renewable Sustainable Energy Rev., 13: 2452-2462.
    CrossRef  |  Direct Link  |  
  206. Jahirul, M.I., R. Saidur, H.H. Masjuki, M.M. Rashid and M.A. Kalam, 2009. Application of Artificial Neural Networks (ANN) in forecasting performance of a dual fuel internal combustion engine. HKIE Transaction, 16: 14-20.
  207. Jahirul, M.I., R. Saidur and H.H. Masjuki, 2009. Application of artificial neural network to predict brake specific fuel consumption of retrofitted CNG engine. Int. J. Mech. Mater. Eng., 4: 249-255.
    Direct Link  |  
  208. Islam, M.R., R. Saidur, N.A. Rahim and K.H. Solangi, 2009. Renewable energy research in Malaysia. Eng. e-Transaction, 4: 69-72.
    Direct Link  |  
  209. Hasanuzzaman, M., R. Saidur and H.H. Masjuki, 2009. Effects of variables on heat transfer, energy losses and energy consumption of household refrigerator-freezer during the closed door condition. Energy, 34: 196-198.
  210. Hasan, M.M., A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki and M. Hamdi, 2009. Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. J. Applied Sci., 9: 2815-2821.
    CrossRef  |  Direct Link  |  
  211. Sattar, M.A., R. Saidur and H.H. Masjuki, 2008. Pure butane as refrigerant in domestic refrigerator-freezer. GMSARN Int. J., 2: 29-34.
  212. Saidur, R., M.M. Hasan, A.S.M.A. Haseeb and H.H. Masjuki, 2008. Energy-efficient optical coating for flat glass. J. Applied Sci., 8: 1883-1890.
    CrossRef  |  Direct Link  |  
  213. Saidur, R., M.I. Jahirul, M. Hasanuzzaman and H.H. Masjuki, 2008. Analysis of exhaust emissions of natural gas engine by using response surface methodology. J. Applied Sci., 8: 3328-3339.
    CrossRef  |  Direct Link  |  
  214. Saidur, R., H.H. Masjuki, M. Hasanuzzaman and G.S. Kai, 2008. Investigation of energy performance and usage behavior of domestic refrigerator freezer using clustering and segmentation. J. Applied Sci., 8: 3957-3962.
    CrossRef  |  Direct Link  |  
  215. Saidur, R., H.H. Masjuki, C.Y. Tan, J.K. Ooi and P.H. Yoon, 2008. Performance investigation of a solar powered thermoelectric refrigerator. Int. J. Mech. Mater. Eng., 3: 7-16.
    Direct Link  |  
  216. Saidur, R. and H.H. Masjuki, 2008. Energy and associated emission analysis at the commercial building of Malaysia. Int. J. Mech. Mater. Eng., 3: 90-96.
  217. Saidur, R. and H.H. Masjuki, 2008. Application of artificial neural networks to investigate the energy performance of household refrigerator-freezers. J. Applied Sci., 8: 2124-2129.
    CrossRef  |  Direct Link  |  
  218. Hasanuzzaman, M., R. Saidur, H.H. Masjuki, 2008. Moisture transfer and energy losses of household refrigerator-freezer during the closed door operation. Int. J. Mech. Mater. Eng., 3: 30-37.
    Direct Link  |  
  219. Hasanuzzaman, M., R. Saidur and H.H. Masjuki, 2008. Investigation of energy consumption and energy savings of refrigerator-freezer during open and closed door condition. J. Appl. Sci., 8: 1822-1831.
    CrossRef  |  Direct Link  |  
  220. Hasan, M.M., A.S.M.A. Haseeb, R. Saidur and H.H. Masjuki, 2008. Effects of annealing treatment on optical properties of anatase TiO2 thin films. Int. J. Chem. Biomol. Eng., 1: 93-97.
    Direct Link  |  
  221. Abdesselam, H., H.H. Masjuki, R.S. Rahman and M. Guellal, 2008. Performance study of water-to-water heat pump using non-Azeotropic refrigerant mixtures R407C. Int. Energy J., 9: 267-274.
    Direct Link  |  
  222. Taufiq, B.N., H.H. Masjuki, T.M.I. Mahlia, R. Saidur, M.S. Faizul and E.N. Mohamad, 2007. Second law analysis for optimal thermal design of radial fin geometry by convection. Applied Therm. Eng., 27: 1363-1370.
    CrossRef  |  Direct Link  |  
  223. Taufiq, B.N., H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, M.A. Amalina and R. Saidur, 2007. Exergy analysis of evaporative cooling for reducing energy use in a Malaysian building. Desalination, 209: 238-243.
    Direct Link  |  
  224. Sattar, M.A., R. Saidur and H.H. Masjuki, 2007. Butane, Isobutane and their mixtures as alternative refrigerant to r-134a in domestic refrigerator. Int. J. Mech. Mater. Eng., 2: 154-160.
  225. Sattar, M.A., R. Saidur and H. H. Masjuki, 2007. Performance investigation of domestic refrigerator using pure hydrocarbons and blends of hydrocarbons as refrigerants. World Acd. Sci. Eng. Technol., 1: 50-55.
    Direct Link  |  
  226. Saidur, R., M.A. Sattar, H.H. Masjuki, H. Abdesselam and B.S. Shahruan, 2007. Energy and exergy analysis in utility and commercial sectors of Malaysia. Energy Policy, 35: 1956-1966.
    Direct Link  |  
  227. Saidur, R., M.A. Sattar, H.H. Masjuki and S. Ahmed, 2007. An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia. Energy Policy, 3: 4018-4026.
    CrossRef  |  Direct Link  |  
  228. Saidur, R., M. Hasanuzzaman, M.A. Sattar, H.H. Masjuki, M.I. Anjum and A.K.M. Mohiuddin, 2007. An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. Int. J. Mech. Mat. Eng., 2: 84-92.
    Direct Link  |  
  229. Saidur, R., M. Hasanuzzaman, M.A. Sattar and H.H. Masjuki, 2007. Open and closed door moisture transport and corresponding energy consumption in household refrigerator. J. Energy Environ., 6: 18-27.
  230. Saidur, R., H.H. Masjuki, M.Y. Jamaluddin and S. Ahmed, 2007. Energy and associated greenhouse gas emissions from household appliances in Malaysia. Energy Policy, 35: 1648-1657.
    CrossRef  |  Direct Link  |  
  231. Saidur, R., H.H. Masjuki and M.Y. Jamaluddin, 2007. An application of energy and exergy analysis in residential sector of Malaysia. Energy Policy, 35: 1050-1063.
  232. Mohiuddin, A.K.M., R. Saidur, M.A. Sattar and A. Rahman, 2007. Comparison of drift eliminators characteristics in evaporative condenser and spray filled tower. Int. Energy J., 8: 155-161.
    Direct Link  |  
  233. Jahirul, I., R. Saidur, H.H. Masjuki and M.A. Kalam, 2007. Environmental effects of conversion of petroleum fuel-based motor cars to natural gas vehicles (NGVs). Int. J. Mech. Mater. Eng., 2: 130-138.
  234. Hasanuzzaman, M., R. Saidur, M. Ali, H.H. Masjuki, M.A Sattar, S.M.Y.M. Jewel and M.F. Alam, 2007. Effect of variables on natural convective heat transfer through v-corrugated vertical plates. Int. J. Mech. Mater. Eng., 2: 109-117.
    Direct Link  |  
  235. Saidur, R., M.A. Sattar, A. Izudin and H.H. Masjuki, 2006. Developing a comprehensive energy guide label for household appliances through consumer's research survey. J. Energy Environ., 5: 77-93.
  236. Saidur, R., H.H. Masjuki, M.Y. Jamaluddin and M.R. Tamjis, 2006. Degree day analysis for Malaysia. Int. J. Mech. Mater. Eng., 1: 28-34.
  237. Saidur, R., H.H. Masjuki, M.Y. Jamaluddin and F.C. Yap, 2006. Actual usage conditions, energy savings and associated emission reductions of washing machines. Trans. Hong Kong Inst. Eng., 13: 16-23.
  238. Saidur, R., H.H. Masjuki and M.Y. Jamaluddin, 2006. Actual usage conditions and energy consumption of refrigerator-freezers. Int. Energy J. AIT, Thailand, 7: 103-124.
  239. Saidur, R., H.H. Masjuki and M.Y. Jamaluddin, 2006. A new approach to investigate the energy performance of a household refrigerator-freezer. Int. Energy J., 7: 13-23.
  240. Saidur, R., A.H.A. Khaliq and H.H. Masjuki, 2006. Analysis of energy and exergy use for process heating in the industrial sector of Malaysia. Int. J. ExergyI Nderscience, 3: 119-149.
    CrossRef  |  
  241. Faizul, M.S., J. Sabariah, R. Shaifulazuar and R. Saidur, 2006. Microstructure and mechanical properties of sintered zirconia produced by injection molding process. Int. J. Mech. Mater. Eng., 1: 95-99.
  242. Abdesselam, H., H.H. Masjuki, R. Saidur and M. Guellal, 2006. Performance evaluation of environmentally benign refrigerants in heat pumps I: Simulation study. Int. J. Mech. Mater. Eng., 1: 108-113.
  243. Saidur, R., W.C. Chew and H.H. Masjuki, 2005. Development and validation of refrigerator-freezers energy consumption model with the aid of RSM. J. Energy Environ., 4: 11-19.
    Direct Link  |  
  244. Saidur, R., M.S. Nizam, H.H. Masjuki, M.R. Tamjis and J. Iswadi, 2005. Temperature performance and usage conditions of domestic refrigerator-freezers in Malaysia. Trans. Hong Kong Inst. Eng., 12: 30-34.
  245. Saidur, R., I. Jahirul, W.B. Leong and H.H. Masjuki, 2005. Development and validation of emission model for a petrol engine using RSM. J. Inst. Eng. Malaysia, 66: 46-51.
  246. Saidur, R., H.H. Masjuki and T.M.I. Mahlia, 2005. Labeling design effort for household refrigerator-freezers in Malaysia. Energy Policy, 33: 611-618.
    Direct Link  |  
  247. Saidur, R. and H.H. Masjuki, 2005. Different methods of grading or rating of refrigerator-freezers. Asian J. Energy environ., 6: 57-69.
    Direct Link  |  
  248. Mahlia, T.M.I., H.H. Masjuki, F.M. Taha, N.A. Rahim and. R. Saidur, 2005. Energy labeling for electric fans in Malaysia. Energy Policy, Elsevier sci., 33: 63-68.
    Direct Link  |  
  249. Saidur, R., A.R. Nasrudin, H.H. Masjuki, I.A. Choudhury, T.M.I. Mahlia and M. Husnawan, 2004. Development of energy test procedure for household refrigerator-freezers in Malaysia. Int. J. Power Energy Syst., 24: 46-55.
    Direct Link  |  
  250. Mahlia, T.M.I., H.H. Masjuki, R. Saidur, M.A. Amalina, 2004. Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia. Energy Policy, 32: 1819-1824.
    CrossRef  |  Direct Link  |  
  251. Mahlia, T.M.I., H.H. Masjuki, R. Saidur and M.A. Amalina, 2004. Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. Energy Policy, 32: 1783-1787.
    CrossRef  |  Direct Link  |  
  252. Saidur, R., H.H. Masjuki and T.M.I. Mahlia, 2003. Impacts of appliance efficiency standards for household appliances in Malaysia. Eng. Trans., 6: 134-136.
  253. Masjuki, H.H., T.M.I. Mahlia, R. Saidur, I.A. Choudhury and A.R. Noor Leha, 2003. Projecting electricity savings from implementing minimum energy efficiency standards for household refrigerator in Malaysia. Energy Int. J., 28: 751-754.
    CrossRef  |  
  254. Saidur, R., H.H. Masjuki and I.A. Choudhury, 2002. The role of ambient temperature, door opening and thermostat setting position and their combined effect on two household refrigerator-freezers' energy consumption. Energy Convers. Manage., 43: 845-854.
  255. Saidur, R., A.R. Nasrudin, H.H. Masjuki, T.M.I. Mahlia and M.R. Tamjis, 2002. Developing energy efficiency standard and its impact on refrigerator-freezers in Malaysia. J. Mekanikal UTM, 14: 63-77.
  256. Saidur, R., A.R. Nasrudin, H.H. Masjuki and T.M.I. Mahlia, 2002. Factor affecting refrigerator-freezers energy consumption. ASEAN J. Sci. Technol. Dev., 19: 57-67.
  257. Saidur, R., A.R. Nasrudin, H.H. Masjuki and T.M.I. Mahlia, 2002. Effect of usage conditions on refrigerator-freezers energy consumption. J. Mekanikal UTM, 13: 64-74.
  258. Masjuki, H.H., T.M.I. Mahlia, I.A. Choudhury and R. Saidur, 2002. Potential com2 reduction by fuel substitution to generate electricity in Malaysia. Energy Convers. Manage., 43: 763-770.
    CrossRef  |  Direct Link  |  
  259. Mahlia, T.M.I., H.H. Masjuki, I.A. Choudhury and R. Saidur, 2002. Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151. Int. J. Power Energy Sys., 2: 80-84.
    Direct Link  |  
  260. Masjuki, H.H., R. Saidur, A.K. Ghani, I.A. Choudhury, MA. Maleque and T.M.I. Mahlia, 2001. The applicability of ISO household refrigerator-freezers energy test specifications in Malaysia. Energy, 26: 723-737.
    CrossRef  |  Direct Link  |  
  261. Mahlia, T.M.I., H.H. Masjuki,I.A. Choudhury and R. Saidur, 2001. Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia. Energy Convers. Manage., 42: 1673-1685.
    Direct Link  |  
  262. Mahlia, T.M.I., H.H. Masjuki, I.A. Choudhury and R. Saidur, 2001. A review on energy efficiency standards and labels: Present status and implementation possibilities in Malaysia. ASEAN J. Sci. Technol. Dev., 18: 71-84.
  263. Masjuki, H.H., T.M.I. Mahlia, R. Saidur and I.A. Choudhury, 2000. Applicability of ISO 5151 and ISO 8187 test condition for room air conditioner and household refrigerator in Malaysia. J. Mekanikal UTM, 2: 1-15.

© All rights reserved | Design By: LiveDNA Member since June, 2010
Record last modified Jul 25, 2022, 10:14 am