Dr. S.  Nallusamy

Dr. S. Nallusamy

Professor
Dr. MGR Educational and Research Institute, India


Highest Degree
Ph.D. in Mechanical Engineering from Jadavpur University, India

Share this Profile

Area of Interest:

Engineering
100%
Supply Chain Management
62%
Composite Materials
90%
Lean Manufacturing
75%
Alternate Fuels
55%

Selected Publications

  1. Sendilvelan, S., K. Bhaskar and S. Nallusamy, 2017. Experimental investigation on cerium oxide nanoparticles with alumina catalytic converter to increase emission conversion efficiency in automobiles. Rasayan J. Chem., 10: 454-460.
    Direct Link  |  
  2. Nallusamy, S., S. Sendilvelan, K. Bhaskar and N.M. Prabu, 2017. Analysis of performance, combustion and emission characteristics on biofuel of novel pine oil. Rasayan J. Chem., 10: 873-880.
    Direct Link  |  
  3. Nallusamy, S., R. Balaji and S. Sundar, 2017. Proposed model for inventory review policy through ABC analysis in an automotive manufacturing industry. Int. J. Eng. Res. Afr., 29: 165-174.
    CrossRef  |  Direct Link  |  
  4. Nallusamy, S., 2017. Synthesis and characterization of carbon black-halloysite nanotube hybrid composites using XRD and SEM. J. Nano Res., 45: 208-217.
  5. Nallusamy, S., 2017. Characterization of Al2O3/water nanofluid through shell and tube heat exchangers over parallel and counter flow. J. Nano Res., 45: 155-163.
  6. Nallusamy, S. and N.M. Prabu, 2017. Heat transfer enhancement analysis of Al2O3-water nanofluid through parallel and counter flow in shell and tube heat exchangers. Int. J. Nanosci., 16: 1-7.
  7. Nallusamy, S. and M.A.A. Ahamed, 2017. Implementation of lean tools in an automotive industry for productivity enhancement-a case study. Int. J. Eng. Res. Afr., 29: 175-185.
    CrossRef  |  Direct Link  |  
  8. Nallusamy, S. and G. Majumdar, 2017. Enhancement of overall equipment effectiveness using total productive maintenance in a manufacturing industry. Int. J. Performability Eng., 13: 1-16.
  9. Nallusamy, S. and A. Karthikeyan, 2017. Synthesis and wear characterization of reinforced glass fiber polymer composites with epoxy resin using granite powder. J. Nano Res., 49: 1-9.
  10. Nallusamy, S. and A. Karthikeyan, 2017. Investigation of microstructural and hardness properties of Al-Al2O3 nano surface composite. Nano Hybrids Compos., 15: 36-45.
  11. Karthikeyan, A. and S. Nallusamy, 2017. Experimental analysis on sliding wear behaviour of aluminium-6063 with SiC particulate composites. Int. J. Eng. Res. Afr., 31: 36-43.
    CrossRef  |  Direct Link  |  
  12. Jeevanantham, S., N.M. Sivaram, D.S.R. Smart, S. Nallusamy and N.M. Prabu, 2017. Effect of machining parameters on MRR and surface roughness in internal grinding using EN8, EN31 steel. Int. J. Applied Eng. Res., 12: 2963-2968.
    Direct Link  |  
  13. Rekha, R.S., P. Periyasamy and S. Nallusamy, 2016. Lean tools implementation for lead time reduction in CNC shop floor of an automotive component manufacturing industry. Indian J. Sci. Technol., 9: 1-6.
  14. Rekha, R.S., P. Periyasamy and S. Nallusamy, 2016. An optimized model for reduction of cycle time using value stream mapping in a small scale industry. Int. J. Eng. Res. Afr., 27: 179-189.
    CrossRef  |  Direct Link  |  
  15. Nallusamy, S., N.M. Prabu, J. Jayaprakash and K. Rajan, 2016. Analysis of design features for inspection robot make use of concrete structures: An assessment. Int. J. Eng. Res. Afr., 17: 74-81.
    Direct Link  |  
  16. Nallusamy, S., M. Ganesan, K. Balakannan and C. Shankar, 2016. Environmental sustainability evaluation for an automobile manufacturing industry using multi-grade fuzzy approach. Int. J. Eng. Res. Afr., 19: 123-129.
    CrossRef  |  Direct Link  |  
  17. Nallusamy, S., D. Kumar, K. Balakannan and P.S. Chakraborty, 2016. MCDM tools application for selection of suppliers in manufacturing industries using AHP, fuzzy logic and ANN. Int. J. Eng. Res. Afr., 19: 130-137.
    Direct Link  |  
  18. Nallusamy, S., A.M.M. Umarmukdhar and R.S. Rekha, 2016. A proposed supply chain model for productivity enhancement in medium scale foundry industries. Int. J. Eng. Res. Afr., 20: 248-258.
    CrossRef  |  Direct Link  |  
  19. Nallusamy, S., 2016. Thermal conductivity analysis and characterization of copper oxide nanofluids through different techniques. J. Nano Res., 40: 105-112.
    CrossRef  |  Direct Link  |  
  20. Nallusamy, S., 2016. Study of mechanical properties on bi-directional e-glass fiber with epoxy resin multi walled CNT nanoсomposite. Nano Hybrids, 10: 14-19.
    CrossRef  |  Direct Link  |  
  21. Nallusamy, S., 2016. Productivity enhancement in a small scale manufacturing unit through proposed line balancing and cellular layout. Int. J. Performability Eng., 12: 523-534.
    Direct Link  |  
  22. Nallusamy, S., 2016. Overall performance improvement of an small scale venture using critical key performance indicators. Int. J. Eng. Res. Afr., 27: 158-166.
    CrossRef  |  Direct Link  |  
  23. Nallusamy, S., 2016. Lean manufacturing implementation in a gear shaft manufacturing company using value stream mapping. Int. J. Eng. Res. Afr., 21: 231-237.
    CrossRef  |  Direct Link  |  
  24. Nallusamy, S., 2016. Frequency analysis of lean manufacturing system by different critical issues in Indian automotive industries. Int. J. Eng. Res. Afr., 23: 181-187.
    CrossRef  |  Direct Link  |  
  25. Nallusamy, S., 2016. Enhancement of productivity and efficiency of CNC machines in a small scale industry using total productive maintenance. Int. J. Eng. Res. Afr., 25: 119-126.
    Direct Link  |  
  26. Nallusamy, S., 2016. Efficiency enhancement in CNC industry using value stream mapping, work standardization and line balancing. Int. J. Performability Eng., 12: 413-422.
    Direct Link  |  
  27. Nallusamy, S., 2016. Characterization of epoxy composites with TiO2 additives and E-glass fibers as reinforcement agent. J. Nano Res., 40: 99-104.
    CrossRef  |  Direct Link  |  
  28. Nallusamy, S., 2016. Analysis of welding properties in FSW aluminium 6351 alloy plates added with silicon carbide particles. Int. J. Eng. Res. Afr., 21: 110-117.
    CrossRef  |  Direct Link  |  
  29. Nallusamy, S., 2016. Analysis of mechanical properties on roselle fibre with polymer matrix reinforced composite. Adv. Eng. Forum, 16: 1-6.
    CrossRef  |  Direct Link  |  
  30. Nallusamy, S., 2016. Analysis of MRR and TWR on ohns die steel with different electrodes using electrical discharge machining. Int. J. Eng. Res. Afr., 22: 112-120.
    Direct Link  |  
  31. Nallusamy, S., 2016. A review on the effects of casting quality, microstructure and mechanical properties of cast Al-Si-0.3 Mg alloy. Int. J. Performability Eng., 12: 143-154.
    Direct Link  |  
  32. Nallusamy, S., 2016. A proposed model for sustaining quality assurance using TQM practices in small and medium scale industries. Int. J. Eng. Res. Afr., 22: 184-190.
    CrossRef  |  Direct Link  |  
  33. Nallusamy, S., 2016. A proposed model for lead time reduction during maintenance of public passenger transport vehicles. Int. J. Eng. Res. Afr. 23: 174-180.
    CrossRef  |  Direct Link  |  
  34. Nallusamy, S. and V. Saravanan, 2016. Lean tools execution in a small scale manufacturing industry for productivity improvement: A case study. Indian J. Sci. Technol., 9: 1-7.
    CrossRef  |  Direct Link  |  
  35. Nallusamy, S. and V. Saravanan, 2016. Enhancement of overall output in a small scale industry through VSM, line balancing and work standardization. Int. J. Eng. Res. Afr., 26: 176-183.
    Direct Link  |  
  36. Nallusamy, S. and S. Muthamizhmaran, 2016. Enhancement of productivity and overall equipment efficiency using time and motion study technique: A review. Adv. Eng. Forum, 14: 59-66.
    CrossRef  |  Direct Link  |  
  37. Nallusamy, S. and S. Kumar, 2016. Efficiency and lifespan enhancement of product with dissimilar material using different techniques. Indian J. Sci. Technol., 9: 1-5.
    CrossRef  |  Direct Link  |  
  38. Nallusamy, S. and P. Ambedkar, 2016. Analysis and ranking of critical supply chain risk factors in small and medium scale industries using QFD. Adv. Eng. Forum, 14: 67-75.
    CrossRef  |  Direct Link  |  
  39. Nallusamy, S. and N.M. Prabu, 2016. Synthesis and characterization of carbon nanofiber with reinforced polymer resin matrix composite. Nano Hybrids, 10: 20-27.
    CrossRef  |  Direct Link  |  
  40. Nallusamy, S. and N.M. Prabu, 2016. Design and development of a metal matrix composite for aeronautical applications: An assessment. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 148-155.
  41. Nallusamy, S. and G. Majumdar, 2016. Effect of stacking sequence and hybridization on mechanical properties of jute-glass fiber composites. Int. J. Performability Eng., 12: 229-239.
  42. Nallusamy, S. and A.M. Babu, 2016. X-ray differaction and FESEM analysis for mixture of hybrid nanoparticles in heat transfer applications. J. Nano Res., 37: 58-67.
    CrossRef  |  Direct Link  |  
  43. Nallusamy, S. and A. Karthikeyan, 2016. Analysis of wear resistance, cracks and frictional properties of metal matrix composites with SiC additives and Al2O3 as reinforcement. Indian J. Sci. Technol., 9: 1-6.
  44. Jha, S.K., S. Nallusamy and S.A. Diwakar, 2016. Future energy scenario in India: An essential overview. Pollut. Res., 35: 595-599.
  45. Jha, S.K., S. Nallusamy and A. Mathur, 2016. Enhancement of heat rejection rate in heat sink using phase change materials. Aust. J. Basic Appl. Sci., 10: 602-606.
  46. Jeevanantham, S., J.D. Rathnaraj, D.R. Smart, S. Nallusamy and N.M. Prabu, 2016. A study on characteristics of parameters influencing internal grinding process with MRR. Indian J. Sci. Technol., 9: 1-7.
    CrossRef  |  Direct Link  |  
  47. Balakannan, K., S. Nallusamy, P.S. Chakraborty and G. Majumdar, 2016. Performance evaluation of supply chain and logistics management system for efficiency enhancement of automotive industries in India. Indian J. Sci. Technol., 9: 1-9.
  48. Babu, A.M., S. Nallusamy and K. Rajan, 2016. Experimental analysis on vapour compression refrigeration system using nanolubricant with HFC-134a refrigerant. Nano Hybrids, 9: 33-43.
    CrossRef  |  Direct Link  |  
  49. Rekha, R.S., S. Nallusamy, R. Vijayakumar and S. Saravanan, 2015. Modeling and analysis of crank shaft with metal matrix composites. Int. J. Appl. Eng. Res., 10: 133-137.
  50. Rekha, R.S., S. Nallusamy and S. Manikandan, 2015. Design and analysis of external expansion collet with hydraulic movement. Int. J. Appl. Eng. Res., 10: 138-142.
  51. Prabu, N.M., S. Nallusamy and R.S. Rekha, 2015. A MICMAC and ISM for correlation analysis of supply chain intricacy drivers. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 48-54.
  52. Nallusamy, S., S. Satheesh, P.S. Chakraborty and K. Balakannan, 2015. A review on supplier selection problem in regular area of application. Int. J. Appl. Eng. Res., 10: 128-132.
  53. Nallusamy, S., R.S. Rekha, K. Balakannan, P.S. Chakraborty and G. Majumdar, 2015. A proposed agile based supply chain model for poultry based products in India. Int. J. Poult. Sci., 14: 57-62.
    CrossRef  |  Direct Link  |  
  54. Nallusamy, S., N.M. Prabu, K. Balakannan and G. Majumdar, 2015. Analysis of static stress in an alloy wheel of the passenger car. Int. J. Eng. Res. Afr., 16: 17-25.
  55. Nallusamy, S., K. Balakannan, R.S. Rekha and K. Balasubramanian, 2015. A review on valuable trends of product data management (PDM) occupied in new product development (NPD). Appl. Mech. Mater., 786: 262-268.
    CrossRef  |  Direct Link  |  
  56. Nallusamy, S., K. Balakannan and M.G. Chakraborty, 2015. Reliability analysis of passenger transport vehicles in public sector undertaking. Int. J. Appl. Eng. Res., 10: 843-850.
  57. Nallusamy, S., G.B. Dinagaraj, K. Balakannan and S. Satheesh, 2015. Sustainable green lean manufacturing practices in small scale industries: A case study. Int. J. Appl. Eng. Res., 10: 143-146.
  58. Nallusamy, S., 2015. Experimental analysis of emission characteristics using CNSL biodiesel in dual fuel mode. Pollut. Res., 34: 721-726.
  59. Nallusamy, S. and A.M. Babu, 2015. Investigation on carbon nanotubes over review on other heat transfer nano fluids. Int. J. Appl. Eng. Res., 10: 112-117.
  60. Dinagaraj, G.B., S. Nallusamy and R.S. Rekha, 2015. Threat reduction in logistics via real-time vehicle routing system using wireless technologies. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 9-19.
  61. Balakannan, K., S. Nallusamy, P.S. Chakraborty and G. Majumdar, 2015. Selection and evaluation of supplier by decision model of hybrid data envelopment analysis. Int. J. Appl. Eng. Res., 10: 123-127.
  62. Balakannan, K., S. Nallusamy and G. Majumdar, 2015. Hybrid DEA decision model for supplier evaluation and selection. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 39-47.
    Direct Link  |  
  63. Prabu, N.M., T.S. Kumar and S. Nallusamy, 2014. Effect of solvent ether (DEE) on internal combustion engine with J20 optimum characterized bio-diesel. Appl. Mech. Mater., 592: 1520-1525.
    CrossRef  |  Direct Link  |  
  64. Prabu, N.M., S. Nallusamy and K.T. Rasu, 2013. Experimental analysis of jatropha curcas bio-diesel for optimum blend characteristics. Bonfring Int. J. Ind. Eng. Manage. Sci., 3: 63-69.
  65. Charles, X., S.C. Parta and K.S. Nallusamy, 2013. Use of electrically heated metal catalytic converter in cold starting to reduce automotive emissions. Sci. Technol. Arts Res. J., 2: 147-152.
    CrossRef  |  Direct Link  |  
  66. Nallusamy, S., B. Sarkar, G. Majumdar and V. Anbalagan, 2008. Comparative analysis of performance of urban state transport undertakings in India. Res. Bull. Inst. Cost Works Accountants India, 31: 123-133.
  67. Nallusamy, S., B. Sarkar, G. Majumdar and V. Anbalagan, 2007. Critical analysis on maintenance systems for vehicles in state transport undertaking. Indian J. Transport Manage., 31: 35-54.
  68. Anbalagan, V., S. Nallusamy and P. Kumar, 2007. Performance evaluation of metropolitan transport corporations in India. Indian J. Transport Manage., 31: 103-121.
  69. Nallusamy, S., B. Sarkar, G. Majumdar and V. Anbalagan, 2006. Failure mode effect analysis for refurbished buses in state transport undertaking. Indian J. Transport Manage., 30: 205-222.