Dr. Ajitanshu Vedrtnam
My Social Links

Dr. Ajitanshu Vedrtnam

Assistant Professor and HOD
Invertis University, India


Highest Degree
PostDoc Fellow in Physical Science Engineering from International Association of Advanced Materials, Sweden

Share this Profile

Area of Interest:

Physical Science Engineering
100%
Mechanical Engineering
62%
Material Sciences
90%
Structural Analysis
75%
Manufacturing Engineering
55%

Research Publications in Numbers

Books
2
Chapters
6
Articles
71
Abstracts
31

Selected Publications

  1. Vedrtnam, A., S. Kumar and S. Chaturvedi, 2019. Experimental study on mechanical behavior, biodegradability and resistance to natural weathering and ultraviolet radiation of wood-plastic composites. Compos. Part B: Engineering, Vol. 176. 10.1016/j.compositesb.2019.107282.
    CrossRef  |  Direct Link  |  
  2. Vedrtnam, A., M. Upadhyay and K. Kalauni, 2019. Experimental and simulation studies on heat transfer characteristics of lab-scale sensible heat storage system. Int. J. Energy Clean Environ., 20: 167-193.
    Direct Link  |  
  3. Vedrtnam, A., 2019. Novel treatment methods for improving fatigue behavior of laminated glass. Compos. Part B: Engineering, 167: 180-198.
    CrossRef  |  Direct Link  |  
  4. Vedrtnam, A., 2019. Novel method for improving fatigue behavior of carbon fiber reinforced epoxy composite. Compos. Part B: Engineering, 157: 305-321.
    CrossRef  |  Direct Link  |  
  5. Vedrtnam, A., 2019. Comparative evaluation of novel thermo-chemical treatment methods for improved impact performance of laminated glass. Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 233: 1334-1344.
    CrossRef  |  Direct Link  |  
  6. Vedrtnam, A. and S.P. Sharma, 2019. Study on the performance of different nano-species used for surface modification of carbon fiber for interface strengthening. Compos. Part A: Applied Sci. Manufact., Vol. 125. 10.1016/j.compositesa.2019.105509.
    CrossRef  |  Direct Link  |  
  7. Vedrtnam, A. and S.J. Pawar, 2019. Ring-on-ring testing of laminated glass with polyvinyl butyral and ethyl vinyl acetate inter-layers of different critical thicknesses. J. Aust. Ceramic Soc., 10.1007/s41779-019-00309-7.
    CrossRef  |  Direct Link  |  
  8. Vedrtnam, A. and D. Sagar, 2019. Experimental and simulation studies on aerodynamic drag reduction over a passenger car. Int. J. Fluid Mech. Res., 46: 39-61.
    CrossRef  |  Direct Link  |  
  9. Vedrtnam, A. and D. Gunwant, 2019. Improving fatigue behavior of cow-dung fiber reinforced epoxy composite using waste glass powder. Mater. Res. Express, Vol. 6. 10.1088/2053-1591/ab3ac0.
    CrossRef  |  Direct Link  |  
  10. Kumar, S., A. Vedrtnam and S.J. Pawar, 2019. Effect of wood dust type on mechanical properties, wear behavior, biodegradability and resistance to natural weathering of wood-plastic composites. Front. Struct. Civil Eng., 10.1007/s11709-019-0568-9.
    CrossRef  |  Direct Link  |  
  11. Vedrtnam, A., G. Singh and A. Kumar, 2018. Optimizing submerged arc welding using response surface methodology, regression analysis and genetic algorithm. Defence Technol., 14: 204-212.
    CrossRef  |  Direct Link  |  
  12. Vedrtnam, A., 2018. Novel method for improving fatigue behavior of laminated glass. Fatigue Fract. Eng. Mater. Struct., 42: 504-517.
  13. Vedrtnam, A., 2018. Fabrication and characterization of cow dung-Polyvinyl alcohol composite film. Compos. Commun., 8: 31-35.
    CrossRef  |  Direct Link  |  
  14. Vedrtnam, A., 2018. Experimental and simulation studies on delamination strength of laminated glass composites having polyvinyl butyral and ethyl vinyl acetate inter-layers of different critical thicknesses. Defence Technol., 14: 313-317.
    CrossRef  |  Direct Link  |  
  15. Vedrtnam, A., 2018. Effect of localized thermo-chemical treatment on bending strength of laminated glass. Int. J. Struct. Glass Adv. Mater. Res., 2: 107-124.
  16. Vedrtnam, A., 2018. Bendingbehavior of laminated Glass. LL Publisher, Moldova.
  17. Vedrtnam, A. and S.J. Pawar, 2018. Experimental and simulation studies on fracture and adhesion test of laminated glass. Engineering Fract. Mech., 190: 461-470.
    CrossRef  |  Direct Link  |  
  18. Vedrtnam, A. and S.J. Pawar, 2018. Experimental and simulation studies on flexural strength of laminated glass using ring-on-ring and three-point bending test. Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 232: 3930-3941.
    CrossRef  |  Direct Link  |  
  19. Vedrtnam, A. and S.J. Pawar, 2018. Experimental and simulation studies on fatigue behavior of laminated glass having polyvinyl butyral and ethyl vinyl acetate interlayers. Fatigue Fract. Eng. Mater. Struct., 41: 1437-1446.
    CrossRef  |  Direct Link  |  
  20. Vedrtnam, A. and S.J. Pawar, 2018. Experimental and simulation studies on acoustical characterisation of laminated safety glass. Glass Technol.-Eur. J. Glass Sci. Technol. Part A, 59: 58-70.
    CrossRef  |  Direct Link  |  
  21. Vedrtnam, A. and D. Sagar, 2018. Variation of drag coefficient, wall static pressure and secondary flow over passenger car. Int. J. Automot. Mech. Eng., 15: 5002-5021.
    Direct Link  |  
  22. Vedrtnam, A. and D. Sagar, 2018. Aerodynamics of Passenger Cars. LL Publisher, Moldova.
  23. Kumar, S. and A. Vedrtnam, 2018. Prediction of thermal history during laser metal deposition. High Temperat. Mater. Process.: Int. Q. High-Technol. Plasma Process., 22: 47-62.
  24. Kumar, A. and A. Vedrtnam, 2018. Energy-exergy analysis of biodiesel fuels produced from waste cooking oil and mustard oil. Fuel 214: 386-408.
    CrossRef  |  Direct Link  |  
  25. Vedrtnam, A. and S.J. Pawar, 2017. Numerical analysis of impact fracture of laminated glass-A review. MOJ Civil Eng., Vol. 3. 10.15406/mojce.2017.03.00086.
    CrossRef  |  Direct Link  |  
  26. Vedrtnam, A. and S.J. Pawar, 2017. Experimental and simulation studies on fracture of laminated glass having polyvinyl butyral and ethyl vinyl acetate interlayers of different critical thicknesses due to impact load. J. Glass Sci. Technol., 58: 169-178.
    CrossRef  |  Direct Link  |  
  27. Vedrtnam, A. and S.J. Pawar, 2017. Laminated plate theories and fracture of laminated glass plate- A review. Eng. Fract. Mech., 186: 316-330.
    CrossRef  |  Direct Link  |  
  28. Vedrtnam, A. and Pawar S.J., 2017. Experimental and simulation studies on flexural strength of laminated glass using ring-on-ring and three-point bending test. J. Mech. Eng. Sci., 10.1177/0954406217744815.
    CrossRef  |  Direct Link  |  
  29. Vedrtnam, A. and A. Kumar, 2017. Fabrication and wear characterization of silicon carbide and copper reinforced aluminium matrix composite. Mater. Discovery, 9: 16-22.
    CrossRef  |  Direct Link  |  
  30. Vedrtnam A. and S.J. Pawar, 2017. Numerical analysis of impact fracture of laminated glass- A review. MOJ Civil Eng., Vol.3, 10.15406/mojce.2017.03.00086.
    CrossRef  |  
  31. Singh, G., A. Vedrtnam and S. Gupta, 2017. Fabrication and characterization of copper graphite composite material. Int. J. Mech. Prod. Eng. Res. Dev., 7: 307-312.
    CrossRef  |  
  32. Singh, G., A. Vedrtnam and Himanshu, 2017. Fabrication and charecterisation of aluminum-graphite composite material. Int. J. Mech. Prod. Eng. Res. Dev., 7: 313-320.
  33. S. Kumar, A. Vedrtnam and S. Kumar, 2017. A review on acoustical properties measurement methods and a proposed novel method for acoustical characterization of laminated glass used in automotive applications. Int. J.Mech. Prod. Eng. Res. Dev., 7: 275-290.
    CrossRef  |  
  34. Vedrtnam, A. and G. Singh, 2016. Study and analysis of welding process parameters on failure load of spot welds of stainless steel. Int. J. Eng. Res. Technol., 2: 985-990.
    Direct Link  |  
  35. Singh, G., A. Vedrtnam and D. Singh, 2016. Fabrication of Al-SiC metal matrix composite and parametric optimization on electro discharge machine. Int. J. Mech. Indus. Technol., 4: 142-149.
  36. Khan, A., A. vedratnam, A. khan and M. Ashar, 2016. Experimental study for bending behaviour of lg with different types of interlayer and thickness. International J. Eng. Res., 4: 112-120.
  37. Khan, A. and A. Vedratnam, 2016. Investigate the effect of wear on TIC coated carbide cutting tool while machining cr-mo alloy using Taguchi method. Int. J. Eng. Sci. Invention Res. Dev., 2: 429-435.
  38. Vedratnam, A., S.J. Pawar and R. Pandey, 2015. Experimental analysis of property variation in biaxially oriented polypropylene film (CBSX30 EH) during storage. Mater. Sci. Indian J., 14: 1-8.
    Direct Link  |  
  39. Vedratnam, A., 2015. Technical studies of boosters in “golf”: A review. Int. J. Adv. Res. Sci. Eng., 4: 366-372.
  40. Vedratnam, A. and D. Sagar, 2015. Aerodynamic upgrades and cooling system abstraction of “Engines”. Int. J. Adv. Technol. Eng. Sci., 3: 812-823.
  41. Khan, A. and A. Vedratnam, 2015. Investigate the effect of machining hard turning process parameter on surface roughness of cr-mo alloy using taguchi method. Int. J. Eng. Res. Online, 3: 609-613.
  42. Khan, A. and A. Vedratnam, 2015. Comprehensive review over the testing procedures, mathematical and software simulation for the analysis of laminated glass. Int. J. Adv. Res. Sci. Eng. (IJARSE) 4: 1480-1497.
  43. Vedrtnam, A., S.J. Pawar and R. Bhandari, 2013. Ultrasonic testing of glass fiber reinforced polypropylene composites. Int. J. Mech. Eng. Technol. (IJMET), 4: 118-124.
  44. Vedrtnam, A. and S.J. Pawar, 2013. Comparative evaluation and regression analysis of PVB, EVA, and SG inter layered laminated glass hardness. Int. J. Eng. Res. Technol., (IJERT), 2: 444-450.
  45. Singh, G. and A. Vedrtnam, 2013. study and analysis of welding process parameters on failure load of spot welds of stainless steel 304L grade. Int. J. Eng. Res. Technol., 2: 985-990.
  46. Chauhan, A.K.S., A. Mishra, U. Pandey and S.J. Pawar, 2013. Mechanism of heat and mass transfer in sandwiched fibrous insulations subjected to moisture absorption and condensation. Int. J. Eng., 2: 2793-2798.